What have you done to correct your camber? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

silvia240 · 10-25-2001, 06:44 AM

Here is a question for all of you.  What kind of suspension set up do you have and how bad is your camber and what did you use to fix it?  

v8killer · 10-25-2001, 08:52 AM

First off, it seems like no matter how much you lower the car, there always seems like negative camber, because the wheels are so straight up-and-down to begin with. BUT, I know that there are bushings that you can buy that are urethane and offset to adjust- (cheap and PIA) -OR- you could go with Enjuku Racing's camber kit, found at their website for about 350.00. I can't seem to find the bushings now, but I'll keep looking, and post it when I find them...
Good Luck!

TRM02 · 10-25-2001, 08:56 AM

Is this what you are looking for ?

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE"> BRAND NEW and much anticipated, PDM is pleased to offer the new Whiteline KCA347 rear camber bush kit that replaces the original rear upper arm bushings to correct the normal camber gain associated with lowered 240SX's. This is the PROPER method to adjust rear camber in a 240SX vs slotting the upper rear arm, and a tremendous improvement for any lowered S13 or S14 as excessive negative rear camber leads to poor traction and handling and unwanted expensive inner tire wear. Designed with the inner metal bushing offset, a single kit will correct +/-0.75 degree change and 2 kits delivering +/-1.5 degrees.
240SX/300ZX (S13, S14 1989-1998)
Rear Camber Correction Bushings (KCA347) . . . . . $58.00/set</td></tr></table><span id='postcolor'>

v8killer · 10-25-2001, 09:00 AM

YES TRM! Thanks for helping me NOT become a liar!!!! <whew>! LOL

**West** · 10-25-2001, 09:02 AM

Best way is to get yourself some Cusco Rear Upper Control Arms. They cost about $360 but they are badass and you can adjuste your camber setting for the rear.

It just so happens that I might sell mine off my car though. Let me know if your interested <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'> hehe

TRM02 · 10-25-2001, 09:19 AM

WeST, can I ask what you are going to do to correct your camber?

**West** · 10-25-2001, 09:38 AM

I already have a set of the Cusco Upper Control Arms, they are about a week old and just installed, but since I am selling my car I feel whomever buys it can fix there own camber since I wont get my $360 back from selling my car with them on there.

burgy240 · 10-25-2001, 02:29 PM

West, how much do u need 2 recover........hint, hint?

**West** · 10-25-2001, 04:47 PM

$300 Shipped...

The Cusco Components really do more then just fix camber. You will laugh at the stock control arms once they are off your car. They are a toothpick compared to the Cusco Arms. It made the rear end hook very well.

mike2016 · 10-25-2001, 11:17 PM

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Quote: from WeST on 4:47 pm on Oct. 25, 2001
$300 Shipped...

The Cusco Components really do more then just fix camber. You will laugh at the stock control arms once they are off your car. They are a toothpick compared to the Cusco Arms. It made the rear end hook very well.</td></tr></table><span id='postcolor'>

I'm interested, would you e-mail me at [email protected] if its still available?  I don't post here often, i'm at freshalloy.com most time....  

*drifterx* · 10-26-2001, 10:39 AM

hey mark why r u selling your car? what r u getting?
also....

i got the Eibach camber bolt for the fronts.

wav399 · 10-27-2001, 03:27 AM

Can you use the Cusco arms for a S13?  and are these better for the car than the bushings pdm sells?

silvia240 · 10-28-2001, 05:17 AM

Hey west.... you are talking about only the rears.. right?  It would be the lower control arms.  And exactly how much degrees of camber will they ajust?  Since you might be selling your car, how about throwing in your suspension for 100 bucks?<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/confused.gif" border="0" valign="absmiddle" alt='???'>?? hehehee...... Ohh and what about your fronts? What did you use of fix that?

10-28-2001, 07:13 PM

well for a stiff suspension a little bit of negative camber is good

vancouvers14 · 10-29-2001, 12:14 PM

sure, if you wanna visit your local tire store every 4 months

10-25-2001, 06:44 AM	#1
silvia240 Zilvia Junkie Join Date: Jul 2001 Location: SoCal Posts: 438 Trader Rating: (0) Feedback Score: 0 reviews	Here is a question for all of you.  What kind of suspension set up do you have and how bad is your camber and what did you use to fix it?

10-25-2001, 08:52 AM	#2
v8killer Zilvia Member Join Date: Oct 2001 Posts: 150 Trader Rating: (0) Feedback Score: 0 reviews	First off, it seems like no matter how much you lower the car, there always seems like negative camber, because the wheels are so straight up-and-down to begin with. BUT, I know that there are bushings that you can buy that are urethane and offset to adjust- (cheap and PIA) -OR- you could go with Enjuku Racing's camber kit, found at their website for about 350.00. I can't seem to find the bushings now, but I'll keep looking, and post it when I find them... Good Luck!

10-25-2001, 08:56 AM	#3
TRM02 Zilvia Member Join Date: Oct 2001 Posts: 166 Trader Rating: (0) Feedback Score: 0 reviews	Is this what you are looking for ? </span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE"> BRAND NEW and much anticipated, PDM is pleased to offer the new Whiteline KCA347 rear camber bush kit that replaces the original rear upper arm bushings to correct the normal camber gain associated with lowered 240SX's. This is the PROPER method to adjust rear camber in a 240SX vs slotting the upper rear arm, and a tremendous improvement for any lowered S13 or S14 as excessive negative rear camber leads to poor traction and handling and unwanted expensive inner tire wear. Designed with the inner metal bushing offset, a single kit will correct +/-0.75 degree change and 2 kits delivering +/-1.5 degrees. 240SX/300ZX (S13, S14 1989-1998) Rear Camber Correction Bushings (KCA347) . . . . . $58.00/set</td></tr></table><span id='postcolor'>

10-25-2001, 09:00 AM	#4
v8killer Zilvia Member Join Date: Oct 2001 Posts: 150 Trader Rating: (0) Feedback Score: 0 reviews	YES TRM! Thanks for helping me NOT become a liar!!!! <whew>! LOL

10-25-2001, 09:02 AM	#5
West OMNOMNOMNOM Join Date: Dec 2000 Location: Denver, CO Age: 44 Posts: 6,456 Trader Rating: (0) Rides Gallery: West Feedback Score: 0 reviews	Best way is to get yourself some Cusco Rear Upper Control Arms. They cost about $360 but they are badass and you can adjuste your camber setting for the rear. It just so happens that I might sell mine off my car though. Let me know if your interested <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'> hehe

10-25-2001, 09:19 AM	#6
TRM02 Zilvia Member Join Date: Oct 2001 Posts: 166 Trader Rating: (0) Feedback Score: 0 reviews	WeST, can I ask what you are going to do to correct your camber?

10-25-2001, 09:38 AM	#7
West OMNOMNOMNOM Join Date: Dec 2000 Location: Denver, CO Age: 44 Posts: 6,456 Trader Rating: (0) Rides Gallery: West Feedback Score: 0 reviews	I already have a set of the Cusco Upper Control Arms, they are about a week old and just installed, but since I am selling my car I feel whomever buys it can fix there own camber since I wont get my $360 back from selling my car with them on there.

10-25-2001, 02:29 PM	#8
burgy240 Nissanaholic! Join Date: Oct 2001 Location: Tampa Age: 49 Posts: 2,151 Trader Rating: (2) Feedback Score: 2 reviews	West, how much do u need 2 recover........hint, hint?

10-25-2001, 04:47 PM	#9
West OMNOMNOMNOM Join Date: Dec 2000 Location: Denver, CO Age: 44 Posts: 6,456 Trader Rating: (0) Rides Gallery: West Feedback Score: 0 reviews	$300 Shipped... The Cusco Components really do more then just fix camber. You will laugh at the stock control arms once they are off your car. They are a toothpick compared to the Cusco Arms. It made the rear end hook very well.

10-25-2001, 11:17 PM	#10
mike2016 Zilvia Junkie Join Date: Oct 2001 Location: Los Angeles Age: 44 Posts: 538 Trader Rating: (0) Feedback Score: 0 reviews	</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Quote: from WeST on 4:47 pm on Oct. 25, 2001 $300 Shipped... The Cusco Components really do more then just fix camber. You will laugh at the stock control arms once they are off your car. They are a toothpick compared to the Cusco Arms. It made the rear end hook very well.</td></tr></table><span id='postcolor'> I'm interested, would you e-mail me at [email protected] if its still available?  I don't post here often, i'm at freshalloy.com most time....

10-26-2001, 10:39 AM	#11
drifterx Premium Member Join Date: May 2001 Location: boston, ma Age: 44 Posts: 1,533 Trader Rating: (0) Feedback Score: 0 reviews	hey mark why r u selling your car? what r u getting? also.... i got the Eibach camber bolt for the fronts.

10-27-2001, 03:27 AM	#12
wav399 Zilvia Member Join Date: Jun 2001 Posts: 196 Trader Rating: (0) Feedback Score: 0 reviews	Can you use the Cusco arms for a S13?  and are these better for the car than the bushings pdm sells?

10-28-2001, 05:17 AM	#13
silvia240 Zilvia Junkie Join Date: Jul 2001 Location: SoCal Posts: 438 Trader Rating: (0) Feedback Score: 0 reviews	Hey west.... you are talking about only the rears.. right?  It would be the lower control arms.  And exactly how much degrees of camber will they ajust?  Since you might be selling your car, how about throwing in your suspension for 100 bucks?<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/confused.gif" border="0" valign="absmiddle" alt='???'>?? hehehee...... Ohh and what about your fronts? What did you use of fix that?

10-28-2001, 07:13 PM	#14
Guest Posts: n/a	well for a stiff suspension a little bit of negative camber is good

10-29-2001, 12:14 PM	#15
vancouvers14 Zilvia Addict Join Date: Jul 2001 Posts: 868 Trader Rating: (0) Feedback Score: 0 reviews	sure, if you wanna visit your local tire store every 4 months