CA FS Sentra SER V spec Gold Brembo Calipers, fully loaded, bolt on!

[drift freaq]

Yup SER Sentra V spec Brembo's fully loaded very gd condition low miles. These bolt right up no brackets needed. weekend special SOLD!

These are a 4 piston Caliper that is over 13 inches tall and uses a 12.1 inch rotor the same diameter as a R32 GTR.

New Rotors for these can be had from anywhere from $37 a piece to $90 a piece depending on brands. You can also get slotted rotors.

for clarification sakes, you can use stock 240 lines or steel braided lines made for stock 240 calipers.

[Brian]

Dave.... you can use these calipers with R32 GTR rotors?

Example...

I have R32 GTR brakes on my car right now. Could I simply take off my GTR calipers and then replace them with these calipers?

[drift freaq]

Originally Posted by Brian

Dave.... you can use these calipers with R32 GTR rotors?

Example...

I have R32 GTR brakes on my car right now. Could I simply take off my GTR calipers and then replace them with these calipers?

No Brian unfortunately not. While the rotor diameters are the same. The thickness is 10mm different. R32 GTR use a 32 mm thick rotor. SER V SPec Brembo's use a 22mm thick rotor.

A lot of people get caught up with rotor thickness forgetting about overall diameter. Diameter is really the key in braking power because the larger the diameter the more surface for larger pads.

Fact is our stock rotors are 18mm thick, these are 22mm so you do get better heat dissipation over stock as well.

They are a really great alternative to a Z32 setup, landing in between a GTR Caliper and a Z32 Caliper.

I.E. braking power of GTR Calipers just not as thick rotors. Though it is much easier to get rotors for these as they came on a car sold here.

[Brian]

aw, rats.

I will have to stick with my fake BREMBOS

[MrChow]

Do these come with pads or rotors?? Also I never did the research what lines to do need??

I know it's a long shot to you take payments??

[drift freaq]

Originally Posted by MrChow

Do these come with pads or rotors?? Also I never did the research what lines to do need??

I know it's a long shot to you take payments??

the are fully loaded which means they come with pads. I do not have rotors you would have to to buy some. For lines you can use your stock lines or steel braided for stock calipers. Payments? IDK.

[lazysk8er2]

so what rotors would u use on a 4 lug s13? im guessing the ones of the sentra but just verifying

[drift freaq]

Originally Posted by lazysk8er2

so what rotors would u use on a 4 lug s13? im guessing the ones of the sentra but just verifying

yes you would use the Sentra SER Spec V rotors 2004-2006.

[drift freaq]

back on up for these