OR FS: RAYS GramLights 57 Pro 18x9 +40, 18x10 +38 5x114.3

[jing]

Wheels are located in Vancouver, Canada but I will figure out shipping if necessary.

I bought these recently and was planning on using them but have changed my mind due to other priorities in life.

Wheels are in great condition but the lips will need a quick refinish as the previous owner tried to polish them until he realized they were clearcoated. This is a relatively easy DIY (http://zilvia.net/f/tech-talk/243016...ur-wheels.html)


1x 18x9 +40 (Matching wheel was damaged) : 2" lip
2x 18x10 +38 : 3" lip

These will fit great on a Z32 or an S13/S14 with spacers.

The previous owner was quoted something like $700 for a new front wheel in the same spec with a 3 month wait time... or think of it as buying the 10j's and geting a free 9j.

Here are some crappy pics taken by the previous owner for now.. I'll whip out the real camera this weekend when I have more spare time.


















NEW PICTURES (April 8, 2009):


The 9j is the one where the previous owner tried to sand down the lip. There's also a small rash on the inside of the wheel...






(rash is on the right, hardly noticeable)

There's a few small spots of clearcoat coming off as well but that shouldnt be an issue as the whole lip would need to be redone as it is...




I just noticed a larger curb rash on the inside of one of the 10's... it's about 1.5" inches long but the wheel is not bent or anything so it should still hold a tire fine.




Minor clearcoat peel on the 10 with the inside rash




The other 10 is in great shape. No clearcoat peel on the lip and no rash. Only some very minor scratches from what I assume is from road debris






900 SHIPPED to lower 48
Willing to entertain reasonable offers

[jing]

bump

still available

[tanks13]

how much picked up if we come from cali ???

[ken.bryle21]

might be a stupid question but would this fit s13 hatch ?

[all show no go]

Originally Posted by ken.bryle21

might be a stupid question but would this fit s13 hatch ?

It will fit if you have 5x114.3 hubs and some spacers to keep the inside of the wheel from hitting your struts/coilovers. (width of the wheel is too wide for that offset on an S13 without spacers.)

O.P. glws

[kokonutz]

willing to sell the 18x10s?

[jing]

^ PM'd

Finally got around to test fitting these rims the other day and..

10j's fit just fine in the rear without spacers. There's about 3/4" of clearance from the coilovers.

The 9j will clear 30mm Z32 brakes but will NOT clear my coilovers.. I'm guessing you'd need a 15mm spacer for it to clear.

[Jaliscano]

let me know if u still have these.. very intrested.. im in LOS ANGELES