rear brake swap problem - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Mr. H · 08-23-2009, 11:33 AM

I have everything off the car at this point and am having trouble seperating the hub/bearing assembly from the knuckle. I am using importnut.net as a guide for the swap but all it says is to seperate them. I have the 4 bolts on the back off, i am just wanting to make sure there isn't anything else i need to remove that might be holding it on or if anyone has any tips on how to get them apart. So far i have tried puting the bolts back in part way and using a hammer to try and persuade them apart, next plan was a bigger hammer. Thought i would ask you all before i tried that. any help would be appreciated.

08-23-2009, 11:33 AM	#1
Mr. H Leaky Injector Join Date: Oct 2006 Location: Columbia, MO Age: 39 Posts: 106 Trader Rating: (0) Feedback Score: 0 reviews	rear brake swap problem I have everything off the car at this point and am having trouble seperating the hub/bearing assembly from the knuckle. I am using importnut.net as a guide for the swap but all it says is to seperate them. I have the 4 bolts on the back off, i am just wanting to make sure there isn't anything else i need to remove that might be holding it on or if anyone has any tips on how to get them apart. So far i have tried puting the bolts back in part way and using a hammer to try and persuade them apart, next plan was a bigger hammer. Thought i would ask you all before i tried that. any help would be appreciated.