CA Misc s-13 silvia front parts - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

racepar1 · 11-19-2009, 02:27 PM

2x used kioto h3c bulbs for silvia front

Used kioto bulbs, still work fine.

SOLD!

S-13 silvia front bumper brackets & foam and 240sx bumper to fender brackets

These are for the JDM s-13 silvia fromt bumper. I also have one set of USDM 240sx bumper to fender brackets.

SOLD!!!

Twist lock clips for s-13 silvia headlights

These are the OE twist-lock clips that hold the boots onto the back of the s-13 silvia headlights. I have 6 of these from a set of headlights that I cannabilized.

5 still available...

$5 each

S-13 silvia headlight wiring harness

This headlight harness was cut of a JDM silvia front clip, unfortuanetly I lost the other one. This is only for ONE SIDE. The headlight connector, foglight connector, bumper light connector, and running light connector are all on the harness. The signal light connector for the corner light is NOT part of the harness. This harness is also NOT plug and play! You must separate what you need and wire it up.

SOLD!

11-19-2009, 02:27 PM	#1
racepar1 Post Whore! Join Date: Jul 2007 Location: Simi Valley, CA Age: 42 Posts: 9,006 Trader Rating: (106) Rides Gallery: racepar1 Feedback Score: 106 reviews	Misc s-13 silvia front parts 2x used kioto h3c bulbs for silvia front Used kioto bulbs, still work fine. SOLD! S-13 silvia front bumper brackets & foam and 240sx bumper to fender brackets These are for the JDM s-13 silvia fromt bumper. I also have one set of USDM 240sx bumper to fender brackets. SOLD!!! Twist lock clips for s-13 silvia headlights These are the OE twist-lock clips that hold the boots onto the back of the s-13 silvia headlights. I have 6 of these from a set of headlights that I cannabilized. *5 still available...* $5 each *S-13 silvia headlight wiring harness* This headlight harness was cut of a JDM silvia front clip, unfortuanetly I lost the other one. This is only for ONE SIDE. The headlight connector, foglight connector, bumper light connector, and running light connector are all on the harness. The signal light connector for the corner light is NOT part of the harness. This harness is also NOT plug and play! You must separate what you need and wire it up. SOLD! Last edited by racepar1; 12-12-2009 at 10:05 AM..