TX FS: fully built small port 4age head setup - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

bcbs13det · 12-06-2009, 08:31 PM

Have seen a fair amount of corollas on here lately so I thought I would post here.

I have a fully built small port head for sale.

Included:
Fully ported small port head, flows 205 cfm on the intake and 145 cfm on the exhaust
Stock valves with 5 angle valve job.
HKS valve springs
1szfe shimless lifter conversion
Crower 288/298 cams witrh 8.7/9mm lift
Lash set for current cam setup .008 intake, .010 exhaust
Comes with small port head fuel rail modded for AN #6 inlet and fuel pressure gauge
T3 20v ITB adaptor block port matched for black top 45mm itbs.
Black top 20v 45mm itbs
T3 velocity stacks in silver
Arp head studs
NST adjustable cam gears.
Red anadized vacuum block.
And a pear of valve covers powder coated black.

This head setup gained 40 hp on a stock redtop bottom end and makes power all the way to 9k rpm.

Head was totally refreshed 2 weeks ago(cleaned, decked, lash set) put back on the motor, just lookin to go another route now.

Looking to get $2000 for everything listed. Don't want to part out as everything is matched.
Will ship at buyers expense. Located in Houston tx.
Call Brad at 832 628 4097.

Itb's and standalone with stock head setup.

With built head setup.

Here's a pic of it in my corolla.

tunerguy4life · 12-06-2009, 08:48 PM

is that a mr2 head on a sr20? im confused

superdooper · 12-06-2009, 08:54 PM

no its 4age, hes just selling the built head

tunerguy4life · 12-06-2009, 09:01 PM

i was thinking it was on an sr20 block which is why i asked.....

bcbs13det · 12-09-2009, 06:52 AM

Nope not on a sr20 block. 4a for sure.
Still need to sell this.
Reasonable offers will be entertained.

12-06-2009, 08:31 PM	#1
bcbs13det Leaky Injector Join Date: Dec 2003 Location: houston, tx Posts: 78 Trader Rating: (1) Feedback Score: 1 reviews	FS: fully built small port 4age head setup Have seen a fair amount of corollas on here lately so I thought I would post here. I have a fully built small port head for sale. Included: Fully ported small port head, flows 205 cfm on the intake and 145 cfm on the exhaust Stock valves with 5 angle valve job. HKS valve springs 1szfe shimless lifter conversion Crower 288/298 cams witrh 8.7/9mm lift Lash set for current cam setup .008 intake, .010 exhaust Comes with small port head fuel rail modded for AN #6 inlet and fuel pressure gauge T3 20v ITB adaptor block port matched for black top 45mm itbs. Black top 20v 45mm itbs T3 velocity stacks in silver Arp head studs NST adjustable cam gears. Red anadized vacuum block. And a pear of valve covers powder coated black. This head setup gained 40 hp on a stock redtop bottom end and makes power all the way to 9k rpm. Head was totally refreshed 2 weeks ago(cleaned, decked, lash set) put back on the motor, just lookin to go another route now. Looking to get $2000 for everything listed. Don't want to part out as everything is matched. Will ship at buyers expense. Located in Houston tx. Call Brad at 832 628 4097. Itb's and standalone with stock head setup. With built head setup. Here's a pic of it in my corolla.

12-06-2009, 08:48 PM	#2
tunerguy4life Leaky Injector Join Date: Jul 2009 Location: Louisiana Age: 36 Posts: 95 Trader Rating: (0) Feedback Score: 0 reviews	is that a mr2 head on a sr20? im confused

12-06-2009, 08:54 PM	#3
superdooper Leaky Injector Join Date: Oct 2009 Location: nashville Age: 36 Posts: 103 Trader Rating: (0) Feedback Score: 0 reviews	no its 4age, hes just selling the built head

12-06-2009, 09:01 PM	#4
tunerguy4life Leaky Injector Join Date: Jul 2009 Location: Louisiana Age: 36 Posts: 95 Trader Rating: (0) Feedback Score: 0 reviews	i was thinking it was on an sr20 block which is why i asked.....

12-09-2009, 06:52 AM	#5
bcbs13det Leaky Injector Join Date: Dec 2003 Location: houston, tx Posts: 78 Trader Rating: (1) Feedback Score: 1 reviews	Nope not on a sr20 block. 4a for sure. Still need to sell this. Reasonable offers will be entertained.