Pulling an sr20 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

mytagsucks · 01-31-2010, 03:37 PM

Hey guys, need some help. I'm looking to have my sr20 rebuilt and really haven't been able to find anything too specific on the process of pulling an sr from my chasis(s13). I've been looking through this site, and google searching it. Really nothing worthwhile for a first timer. I'm 17 with a dad who doesn't know shit about cars for the most part so I could use some help on this one. I'm looking to save about $800-900 bucks in labor so I can put that towards some coils or wheels potentially, and I really would like to get to know my car alot better. I know the basic steps of drain the fluids, detach all wiring, vaccum lines, and hoses, use a crain, and detach the engine from the motot mounts. I'm just worried about some of the finer details if there are any. Any tips or walkthroughs that you've seen out there? Any help would be appreciated

01-31-2010, 03:37 PM	#1
mytagsucks Leaky Injector Join Date: Jul 2009 Location: Chicago Posts: 135 Trader Rating: (3) Feedback Score: 3 reviews	Pulling an sr20 Hey guys, need some help. I'm looking to have my sr20 rebuilt and really haven't been able to find anything too specific on the process of pulling an sr from my chasis(s13). I've been looking through this site, and google searching it. Really nothing worthwhile for a first timer. I'm 17 with a dad who doesn't know shit about cars for the most part so I could use some help on this one. I'm looking to save about $800-900 bucks in labor so I can put that towards some coils or wheels potentially, and I really would like to get to know my car alot better. I know the basic steps of drain the fluids, detach all wiring, vaccum lines, and hoses, use a crain, and detach the engine from the motot mounts. I'm just worried about some of the finer details if there are any. Any tips or walkthroughs that you've seen out there? Any help would be appreciated