TX Fully built SR - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

91 240 · 10-13-2009, 06:45 PM

I am parting out my current setup and going with something completely different. This is my fully built SR20DET with only 1100 easy break in miles. Motor has never seen boost and has solid 160psi compression and 2% leak down across all 4 cylinders. Motor is built for 600 whp! Here is the build list and everything included, i also have receipts for all parts and labor:

Aftermarket parts
S13 redtop motor
Apexi cylinder sleeves
Crower rods (not Brian Crower)
CP 87mm pistons 8.5 compression
ARP main studs
ARP head studs
Greddy oil pan
Cometic MLS head gasket
Comp Cams valve springs
HKS 272 step 2 cams
Greddy rocker arm stoppers
MMR polyurethane motor mounts
ACT 6 puck clutch kit

New OEM parts
Main bearings
Rod bearings
Thrust bearings
Front cover/oil pump and front main seal
Water pump
Timing chain and crank gear
Updated timing chain guides
Timing chain tensioner
Rear main seal
Valve stem seals
Water temp sensor

Machine Work
Balance/polish crank
Balance rotating assembly
Sleeve install/bore/hone
Align hone mains
Decked block and head
5 angle valve job

Other accessories and items included
CAS
Alternator
Starter
Coil packs
Power steering pump with DOHC s13 reservoir
Autometer oil temp sender in oil pan
Coolant temp cluster gauge sender removed and tapped for Autometer 1/8 npt sender
Stock oil pressure sender removed and has Autometer 1/8 bspt ->1/8npt fitting
Heater hose hard lines have nipples removed and welded shut
Stock PCV removed and -10AN fitting has been welded to valve cover for crankcase evac

Open to reasonable offers only.

Please PM or email at [email protected] if interested or for any questions. Thanks.

s13.5dream · 11-12-2009, 10:53 AM

how much are you looking to get for the engine

mpjustchilln · 11-15-2009, 12:38 AM

pm me your best price

91 240 · 11-23-2009, 09:33 PM

last chance, any offers?

babillaracing · 11-24-2009, 07:14 PM

nice build ,prety well build

91 240 · 11-28-2009, 10:23 AM

forgot to mention, i have receipts for all parts and machine work

NMs14.5kouki · 11-28-2009, 12:49 PM

do you want to separate? im interested in just the block?

mattro · 11-28-2009, 01:19 PM

i wish i had the money for this, my engine is toast.

s13silvia123 · 11-28-2009, 02:17 PM

will you part i just want the head with all the goodies. if you do pm me

ichihachizero · 01-25-2010, 07:10 AM

I want to buy it how much?

91 240 · 01-27-2010, 08:45 PM

Sale pending

reccakun08 · 01-28-2010, 06:30 PM

who built the motor?

91 240 · 02-02-2010, 11:04 AM

SOLD! Please close thread

10-13-2009, 06:45 PM	#1
91 240 Zilvia Member Join Date: Nov 2003 Location: Austin, Tx Age: 46 Posts: 208 Trader Rating: (8) Feedback Score: 8 reviews	Fully built SR I am parting out my current setup and going with something completely different. This is my fully built SR20DET with only 1100 easy break in miles. Motor has never seen boost and has solid 160psi compression and 2% leak down across all 4 cylinders. Motor is built for 600 whp! Here is the build list and everything included, i also have receipts for all parts and labor: Aftermarket parts S13 redtop motor Apexi cylinder sleeves Crower rods (not Brian Crower) CP 87mm pistons 8.5 compression ARP main studs ARP head studs Greddy oil pan Cometic MLS head gasket Comp Cams valve springs HKS 272 step 2 cams Greddy rocker arm stoppers MMR polyurethane motor mounts ACT 6 puck clutch kit New OEM parts Main bearings Rod bearings Thrust bearings Front cover/oil pump and front main seal Water pump Timing chain and crank gear Updated timing chain guides Timing chain tensioner Rear main seal Valve stem seals Water temp sensor Machine Work Balance/polish crank Balance rotating assembly Sleeve install/bore/hone Align hone mains Decked block and head 5 angle valve job Other accessories and items included CAS Alternator Starter Coil packs Power steering pump with DOHC s13 reservoir Autometer oil temp sender in oil pan Coolant temp cluster gauge sender removed and tapped for Autometer 1/8 npt sender Stock oil pressure sender removed and has Autometer 1/8 bspt ->1/8npt fitting Heater hose hard lines have nipples removed and welded shut Stock PCV removed and -10AN fitting has been welded to valve cover for crankcase evac Open to reasonable offers only. Please PM or email at [email protected] if interested or for any questions. Thanks. __________________ 91 240sx 03 Pathfinder

11-23-2009, 09:33 PM	#4
91 240 Zilvia Member Join Date: Nov 2003 Location: Austin, Tx Age: 46 Posts: 208 Trader Rating: (8) Feedback Score: 8 reviews	last chance, any offers? __________________ 91 240sx 03 Pathfinder

11-28-2009, 10:23 AM	#6
91 240 Zilvia Member Join Date: Nov 2003 Location: Austin, Tx Age: 46 Posts: 208 Trader Rating: (8) Feedback Score: 8 reviews	forgot to mention, i have receipts for all parts and machine work __________________ 91 240sx 03 Pathfinder

11-28-2009, 01:19 PM	#8
mattro Zilvia Junkie Join Date: Dec 2008 Location: henrietta, ny Age: 36 Posts: 478 Trader Rating: (4) Feedback Score: 4 reviews	i wish i had the money for this, my engine is toast. __________________ grip like roots, float like leaves. wtb s13 sus.

11-28-2009, 02:17 PM	#9
s13silvia123 Post Whore! Join Date: May 2006 Location: where waldo is Age: 43 Posts: 3,267 Trader Rating: (16) Feedback Score: 16 reviews	will you part i just want the head with all the goodies. if you do pm me __________________ 18g and 20g turbo users click on me http://zilvia.net/f/tech-talk/261219-18g-20g-turbo-users.html

11-12-2009, 10:53 AM	#2
s13.5dream BANNED Join Date: Sep 2009 Location: here and there Posts: 68 Trader Rating: (0) Feedback Score: 0 reviews	how much are you looking to get for the engine

11-15-2009, 12:38 AM	#3
mpjustchilln Leaky Injector Join Date: Apr 2009 Location: Arizona & OC Posts: 65 Trader Rating: (2) Feedback Score: 2 reviews	pm me your best price

11-24-2009, 07:14 PM	#5
babillaracing Zilvia Junkie Join Date: Oct 2009 Location: tampa Age: 48 Posts: 382 Trader Rating: (3) Feedback Score: 3 reviews	nice build ,prety well build

11-28-2009, 12:49 PM	#7
NMs14.5kouki Zilvia Addict Join Date: Apr 2009 Location: Everywhere Age: 36 Posts: 654 Trader Rating: (38) Feedback Score: 38 reviews	do you want to separate? im interested in just the block?

01-25-2010, 07:10 AM	#10
ichihachizero Zilvia Member Join Date: Nov 2009 Location: san antonio Age: 33 Posts: 205 Trader Rating: (13) Feedback Score: 13 reviews	I want to buy it how much?

01-27-2010, 08:45 PM	#11
91 240 Zilvia Member Join Date: Nov 2003 Location: Austin, Tx Age: 46 Posts: 208 Trader Rating: (8) Feedback Score: 8 reviews	Sale pending __________________ 91 240sx 03 Pathfinder

01-28-2010, 06:30 PM	#12
reccakun08 Zilvia FREAK! Join Date: Jun 2003 Location: Rockville, Maryland Age: 40 Posts: 1,090 Trader Rating: (5) Feedback Score: 5 reviews	who built the motor?

02-02-2010, 11:04 AM	#13
91 240 Zilvia Member Join Date: Nov 2003 Location: Austin, Tx Age: 46 Posts: 208 Trader Rating: (8) Feedback Score: 8 reviews	SOLD! Please close thread __________________ 91 240sx 03 Pathfinder