GA S14 abs vlsd - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

s14unimog · 03-17-2010, 11:26 AM

This is the VLSD out of my 1996 240sx. The differential was actually from an ABS model S14, so you will need the rear section from an ABS car if you don't already have ABS. If you have a one piece driveline, and don't have ABS, check to see if you have at least a 1/2" of play in the slip yoke. the differences between an ABS and none ABS housing is only 1/2" in length. I know this b/c I just fitted my Kaaz to a none ABS housing and measured the difference. Its in excellent condition and locks up very well. The output shafts are 6 bolt. Will include OEM forward bushings.

SOLD $200

03-17-2010, 11:26 AM	#1
s14unimog Nissanaholic! Join Date: Dec 2003 Location: In a place, near a river, over a lake Age: 38 Posts: 2,415 Trader Rating: (22) Rides Gallery: s14unimog Feedback Score: 22 reviews	S14 abs vlsd This is the VLSD out of my 1996 240sx. The differential was actually from an ABS model S14, so you will need the rear section from an ABS car if you don't already have ABS. If you have a one piece driveline, and don't have ABS, check to see if you have at least a 1/2" of play in the slip yoke. the differences between an ABS and none ABS housing is only 1/2" in length. I know this b/c I just fitted my Kaaz to a none ABS housing and measured the difference. Its in excellent condition and locks up very well. The output shafts are 6 bolt. Will include OEM forward bushings. SOLD $200 __________________ Fuking ginger bread man stole my wallet... SHIFTlock_slide to side d3m3rs0n: if i have a baby im naming it Brandons Fault Emerson Last edited by s14unimog; 03-22-2010 at 08:20 PM..*