CA Rb25det part out 240z swap - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

K20a2ivtec · 03-23-2010, 12:42 AM

PARTS HAVE BEEN PRICE WITH NO SHIPPING PRICE INCLUDED
I will sell the compete package for 2900 firm
Selling because I got a 2jz

RB25DET NEO 6 bottom end (oil pan not included, has RB26DETT stock rods) $500

RB25DET NEO 6 head (has RB20DET intake cam, cam gears not included) $250

My turbo set up (stock turbo manifold moded for external wastegate with a synapse 50mm wastegate on a ebay t3/t4 70 trim turbo .63 stage three rear, had full boost of 20lbs by 2700 rpm and pulled hard all the way, no shaft play) $450

RB25DET ARP head studs, and a tomei 1.2mm head gasket (head studs not sure if they will work with both neo and non neo heads, but they where in my neo, head gasket was used once, could still use it...) $100

HKS cam gears and timing belt (had an oil leak so the belt is now black.. and the cam gears are a lil faided, have 2000 miles on them) $175

Jun style intake manifold (will come with jyc top feed rail with 440cc injectors and a q45 throttle body and A.N. fittings for the vacum lines) $600

GTS R33 transmission (grinds 4th but didnt have a prob gettin into gear and never poped out of gears) $500

GTS R33 flywheel and spec stage 3.5+ clutch (has 2000 miles on it) $350

Starter (I have 2 of them) $50 each

RB26DETT eagle rods and je pistons (dont know the miles on them, but they look in good condition, pistons are .20 over) $500

Mchinney motor mount kit for RB into 240z (comes with oil pan moded to fit 240z, motor mounts, trans mount, and drive shaft) $400

R34 NEO 6 ecm stuff, no wiring harness $150

i have pics, lemme know what you wanna see

numbnuts240 · 03-23-2010, 07:59 AM

pm'd about the mount set-up.

DeLorean · 03-23-2010, 10:34 AM

VERY interested in the mount kit, I have PMd you, let me know if you received it.

ninety1two40 · 03-23-2010, 10:53 AM

Willing to sell just the stock manifold with wastegate?

sicner · 03-23-2010, 11:02 AM

PM'ed about turbo lines

K20a2ivtec · 03-24-2010, 08:45 PM

bump numbers 1

silverarrow27 · 03-24-2010, 10:30 PM

Sucks, my brother was up that way this past weekend. Could have had him pick up the rb mount kit for me. Would you pm me a shipping quote to 92220 anyway if you're willing to ship? Curious is the oil pan for a 200zr or stock oil pan modded to fit? Custom drive shaft or is it McKinney?

*racerx2k1* · 03-25-2010, 08:15 AM

http://zilvia.net/f/wheels-tires/109...-ask-pics.html

03-23-2010, 12:42 AM	#1
K20a2ivtec Zilvia Member Join Date: Jul 2007 Location: nor cali Age: 39 Posts: 287 Trader Rating: (0) Feedback Score: 0 reviews	Rb25det part out 240z swap PARTS HAVE BEEN PRICE WITH NO SHIPPING PRICE INCLUDED I will sell the compete package for 2900 firm Selling because I got a 2jz RB25DET NEO 6 bottom end (oil pan not included, has RB26DETT stock rods) $500 RB25DET NEO 6 head (has RB20DET intake cam, cam gears not included) $250 My turbo set up (stock turbo manifold moded for external wastegate with a synapse 50mm wastegate on a ebay t3/t4 70 trim turbo .63 stage three rear, had full boost of 20lbs by 2700 rpm and pulled hard all the way, no shaft play) $450 RB25DET ARP head studs, and a tomei 1.2mm head gasket (head studs not sure if they will work with both neo and non neo heads, but they where in my neo, head gasket was used once, could still use it...) $100 HKS cam gears and timing belt (had an oil leak so the belt is now black.. and the cam gears are a lil faided, have 2000 miles on them) $175 Jun style intake manifold (will come with jyc top feed rail with 440cc injectors and a q45 throttle body and A.N. fittings for the vacum lines) $600 GTS R33 transmission (grinds 4th but didnt have a prob gettin into gear and never poped out of gears) $500 GTS R33 flywheel and spec stage 3.5+ clutch (has 2000 miles on it) $350 Starter (I have 2 of them) $50 each RB26DETT eagle rods and je pistons (dont know the miles on them, but they look in good condition, pistons are .20 over) $500 Mchinney motor mount kit for RB into 240z (comes with oil pan moded to fit 240z, motor mounts, trans mount, and drive shaft) $400 R34 NEO 6 ecm stuff, no wiring harness $150 i have pics, lemme know what you wanna see

03-23-2010, 10:34 AM	#3
DeLorean Join Date: Mar 2010 Location: San Jose, CA Posts: 39 Trader Rating: (0) Feedback Score: 0 reviews	Mount kit VERY interested in the mount kit, I have PMd you, let me know if you received it.

03-23-2010, 10:53 AM	#4
ninety1two40 Join Date: Dec 2007 Location: Duanesburg, NY Age: 40 Posts: 49 Trader Rating: (0) Feedback Score: 0 reviews	Willing to sell just the stock manifold with wastegate? __________________ SlideNY.com

03-24-2010, 10:30 PM	#7
silverarrow27 Zilvia FREAK! Join Date: Oct 2005 Location: Banning, CA Posts: 1,428 Trader Rating: (11) Feedback Score: 11 reviews	Sucks, my brother was up that way this past weekend. Could have had him pick up the rb mount kit for me. Would you pm me a shipping quote to 92220 anyway if you're willing to ship? Curious is the oil pan for a 200zr or stock oil pan modded to fit? Custom drive shaft or is it McKinney? __________________ 1989 240sx XE\|2002 Frontier SC CC LB 4wd\|2011 Pathfinder LE V8 4wd

03-25-2010, 08:15 AM	#8
racerx2k1 460 Join Date: Jan 2004 Location: Nowhere Posts: 17,704 Trader Rating: (0) Feedback Score: 0 reviews	http://zilvia.net/f/wheels-tires/109...-ask-pics.html __________________

03-23-2010, 07:59 AM	#2
numbnuts240 Join Date: Jun 2008 Location: Central CT Posts: 2 Trader Rating: (0) Feedback Score: 0 reviews	pm'd about the mount set-up.

03-23-2010, 11:02 AM	#5
sicner Leaky Injector Join Date: Mar 2006 Location: :D Age: 36 Posts: 88 Trader Rating: (2) Feedback Score: 2 reviews	PM'ed about turbo lines

03-24-2010, 08:45 PM	#6
K20a2ivtec Zilvia Member Join Date: Jul 2007 Location: nor cali Age: 39 Posts: 287 Trader Rating: (0) Feedback Score: 0 reviews	bump numbers 1