a few problems with my SR install - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

memphiss13 · 07-17-2003, 09:09 PM

well we cranked her up and the sound was beautiful but just a few little issues.
first off, none of the interior lights, gauge cluster, windows, etc work. my friend helped out with the wiring and we think its good, but there has to be a problem somewhere. under the dash harness there are two black wires on the brown plug that are not used. there were three and we just hooked up one. my assumption is that they are grounds. do these all need to be hooked in together some how? anybody ever had this problem before?

one more question. i have hicas on my car and i bought a hicas lock kit. the problem is that i don't have a hicas P/S pump for my SR. when installing this kit you have to have the hicas operating in order to put the spacers in though. my question is, could i just power them by the one line on the P/S pump that would usually go to front? just for while i have it in test mode and then i would put the front one back on.

i plan to take all the hicas crap out so buying a hicas P/S pump will not be something that i want to do.

thanks in advance guys.

07-17-2003, 09:09 PM	#1
memphiss13 Zilvia Member Join Date: Apr 2003 Location: Cordova, TN Age: 41 Posts: 287 Trader Rating: (0) Feedback Score: 0 reviews	a few problems with my SR install well we cranked her up and the sound was beautiful but just a few little issues. first off, none of the interior lights, gauge cluster, windows, etc work. my friend helped out with the wiring and we think its good, but there has to be a problem somewhere. under the dash harness there are two black wires on the brown plug that are not used. there were three and we just hooked up one. my assumption is that they are grounds. do these all need to be hooked in together some how? anybody ever had this problem before? one more question. i have hicas on my car and i bought a hicas lock kit. the problem is that i don't have a hicas P/S pump for my SR. when installing this kit you have to have the hicas operating in order to put the spacers in though. my question is, could i just power them by the one line on the P/S pump that would usually go to front? just for while i have it in test mode and then i would put the front one back on. i plan to take all the hicas crap out so buying a hicas P/S pump will not be something that i want to do. thanks in advance guys.