Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk

Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 07-24-2004, 08:07 PM   #1
firekirin
 
Join Date: Nov 2003
Location: Florida
Age: 42
Posts: 44
Trader Rating: (0)
firekirin is an unknown quantity at this point
Feedback Score: 0 reviews
Send a message via AIM to firekirin
white smoke

hey everyone just need some help in diagnosing the problem i will start off with what i have on the car

91 240 hatch:

sr20det blacktop
Greddy fmic
greddy oil filter relocation kit
walbro 255 fuel pump
spec stage 2 cluth with lightweight flywheel
greddy 3in dp to 3in exhaust
apexi avcr boost controller (not adjust just hooked it up and left it stock)

the problem i m having is that when i m at WOT it makes a poping noise like it is burning extra gas or something and one time it was idling and white smoke starting coming out of the exhaust.... wel just tonight i was at a friend and i gave a guy a ride in the car cause he wanted to feel the power of the sr ( not that it is something special or nothing) well i did that then they wanted me to do a little burnout so i spun the tires just a little and it was fine thne when i parked i let it run for a while and then it started blow white smoke..... so i gave it a little gas it kept blowing... i gave it a couple pushes on the gas pedal and it went away.....

i m not a tech or nothing this is why i built this car is to learn.. i believe that it is my o2 sensor ... i have the timing at 15 and i also have to set my TPS sensor cause i havent had a chance to get a voltmeter and do that .... so saying all of this does anyone have any suggestions on what i should do?

i live in florida, and i bought the engine used so pretty much everything is orginal except i replace the intake, exhaust, turbo and the throttle body gaskets.... let me know if you need more info thx
firekirin is offline   Reply With Quote
Sponsored Links
Old 06-28-2010, 07:21 PM   #2
Aepharoh
Zilvia Member
 
Aepharoh's Avatar
 
Join Date: May 2009
Location: Orange County
Age: 38
Posts: 170
Trader Rating: (7)
Aepharoh is an unknown quantity at this point
Feedback Score: 7 reviews
Send a message via Yahoo to Aepharoh
hey dood how much is the clutch
Aepharoh is offline   Reply With Quote
Old 06-28-2010, 08:05 PM   #3
spools420a
Zilvia Junkie
 
spools420a's Avatar
 
Join Date: Dec 2009
Location: phoenix az
Age: 43
Posts: 460
Trader Rating: (1)
spools420a is a well-known jackass
Feedback Score: 1 reviews
white smoke is usually an indication that moisture is entering the combustion chamber,If your o2 sensor was faulty it would run in open loop most of the time and run rich,Did you check for error codes?Hopefully its not a headgasket or a cracked cylinder wall =/ it could be the turbo seal,Go to harbor frieght and purchase a cylinder leak down tester.
spools420a is offline   Reply With Quote
Old 06-29-2010, 01:47 AM   #4
greenzenki86
Zilvia Member
 
greenzenki86's Avatar
 
Join Date: Jul 2009
Location: Where the palm trees grow
Age: 38
Posts: 196
Trader Rating: (7)
greenzenki86 is an unknown quantity at this point
Feedback Score: 7 reviews
yeah id do a compression test, theres quite a few things it could be, headgasket, valve stem seal, but white smoke is usually cas your burning antifreeze, I wouldnt drive it till figured out cas you mau just make it worse, hope that helps a bit.
greenzenki86 is offline   Reply With Quote
Reply

Bookmarks



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 07:43 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net