FL Help me clean out my garage sale! sr, s13, s14 parts! radiator, gauges, etc - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

waste_of_space · 10-09-2010, 04:34 PM

s14 stuff!:
These are all leftover parts from doing a 14 KA swap into my s13.
Items came out of a fully functioning s14 (motor was swapped out for an SR)
All parts are OBO, and I can meet up/deliver (within reason).
Also I'm willing to ship, for a few extra bucks.

S14 KA transmission, missing reverse sensor, includes shifter (needs a shifter snap ring, though), $75

S14 ECU harness, $70

S14 WC ECU, $45

S14 MAF (will include an aluminum adapter to allow use of a cone filter+is tapped/includes an IAT sensor, also will include a cone filter), $50

S14 Dizzy, $40

Stock 270cc injectors installed in a stock fuel rail, complete with stock FPR installed, $75 shipped.

SR stuffs:

brand new C&R / visteon racing radiator (from my understanding they're much better than koyo's!), has minor shipping dings, but is brand new, asking $175 shipped!

plug and play sr20 into s13 chassis harness (redtop/early blacktop motor)
everything was functional, but the o2 sensor plug will need to be rewired (or you could just use your wideband to simulate the o2 sensor signal). All dash gauges and what not worked, I'm not sure if the AC did or not, as I wasn't running AC in my car. Includes q45 ignitor, this is a direct drop in harness to get your motor swap running! $160 shipped.

q45 maf + metal suction pipe + a brand new pigtail for the maf.

MAF is in good condition, comes freshley cleaned. I was going to use it as an upgrade on my motor, but I'm switching to a MAP sensor soon, so I have no need for this setup anymore.

$90 OBO. (Or $50 for the MAF+pigtail, $50 for the suction pipe)

Full set of (4) stock sr20det injectors, 370cc.

They don't have pintle caps! But still work fine.

Asking $65 shipped/pp!

EACH DAUGTHERBOARD IS $50 each, shipping and paypal fees included!

Each board will come with 2 chips (you'll need someone to set you up with a tune, though)

SR20DET boards (redtop/black top; not s14 sr motor; not type x sr motor) and I THINK they will work with KA motors
I've got 2 of them left

Fairlady Z, turbo boards (Z32); will also work on s14 sr motors! I have two of them.

Newer SR20DET board (type x motor, s15 motor, s14 motor)

brand new, still in the box glowshift red digital gauges.
Oil temperature, and oil pressure.
These are complete, with all necessary wires and sensors.

I was gonna run these in my coupe, but it got totaled and now I'm going to go a different route.

TEMP READS IN DEGREES CELSIUS AND PRESSURE IS IN BAR!!!

$105, shipped/PP for both gauges! Also have a barely used matching water temp gauge to go with this set (still even has the plastic protector on the gauge), will ship you all 3 gauges for $130!

95n240sx · 10-09-2010, 06:37 PM

how much for the s14 dizzy shipped to murfreesboro tn 37130?

Dominic Axelson · 10-09-2010, 08:54 PM

PM'd you sir.

waste_of_space · 10-13-2010, 01:46 PM

Bump time!

waste_of_space · 10-15-2010, 05:55 PM

Last bumpppp

smokin18 · 10-15-2010, 07:53 PM

might be intrested in the maf and suction pipe.

JCGator42 · 10-15-2010, 08:45 PM

^ interested in tranny, c&r rad (if it fits S13) and S13 full SR harness. Going to be in Jax next weekend (live in S. FL), willing to meet half way b/w there and Navarre or something along those lines? PM me if so

waste_of_space · 10-28-2010, 10:21 PM

(msg length)

10-09-2010, 04:34 PM	#1
waste_of_space Zilvia Addict Join Date: Sep 2009 Location: Fort Walton Beach, FL Posts: 657 Trader Rating: (22) Feedback Score: 22 reviews	Help me clean out my garage sale! sr, s13, s14 parts! radiator, gauges, etc s14 stuff!: These are all leftover parts from doing a 14 KA swap into my s13. Items came out of a fully functioning s14 (motor was swapped out for an SR) All parts are OBO, and I can meet up/deliver (within reason). Also I'm willing to ship, for a few extra bucks. S14 KA transmission, missing reverse sensor, includes shifter (needs a shifter snap ring, though), $75 S14 ECU harness, $70 S14 WC ECU, $45 S14 MAF (will include an aluminum adapter to allow use of a cone filter+is tapped/includes an IAT sensor, also will include a cone filter), $50 S14 Dizzy, $40 Stock 270cc injectors installed in a stock fuel rail, complete with stock FPR installed, $75 shipped. SR stuffs: brand new C&R / visteon racing radiator (from my understanding they're much better than koyo's!), has minor shipping dings, but is brand new, asking $175 shipped! plug and play sr20 into s13 chassis harness (redtop/early blacktop motor) everything was functional, but the o2 sensor plug will need to be rewired (or you could just use your wideband to simulate the o2 sensor signal). All dash gauges and what not worked, I'm not sure if the AC did or not, as I wasn't running AC in my car. Includes q45 ignitor, this is a direct drop in harness to get your motor swap running! $160 shipped. q45 maf + metal suction pipe + a brand new pigtail for the maf. MAF is in good condition, comes freshley cleaned. I was going to use it as an upgrade on my motor, but I'm switching to a MAP sensor soon, so I have no need for this setup anymore. $90 OBO. (Or $50 for the MAF+pigtail, $50 for the suction pipe) Full set of (4) stock sr20det injectors, 370cc. They don't have pintle caps! But still work fine. Asking $65 shipped/pp! EACH DAUGTHERBOARD IS $50 each, shipping and paypal fees included! Each board will come with 2 chips (you'll need someone to set you up with a tune, though) SR20DET boards (redtop/black top; not s14 sr motor; not type x sr motor) and I THINK they will work with KA motors I've got 2 of them left Fairlady Z, turbo boards (Z32); will also work on s14 sr motors! I have two of them. Newer SR20DET board (type x motor, s15 motor, s14 motor) brand new, still in the box glowshift red digital gauges. Oil temperature, and oil pressure. These are complete, with all necessary wires and sensors. I was gonna run these in my coupe, but it got totaled and now I'm going to go a different route. TEMP READS IN DEGREES CELSIUS AND PRESSURE IS IN BAR!!! $105, shipped/PP for both gauges! Also have a barely used matching water temp gauge to go with this set (still even has the plastic protector on the gauge), will ship you all 3 gauges for $130!

10-09-2010, 06:37 PM	#2
95n240sx Join Date: Oct 2010 Location: Murfreesboro, TN Posts: 3 Trader Rating: (0) Feedback Score: 0 reviews	how much for the s14 dizzy shipped to murfreesboro tn 37130?

10-09-2010, 08:54 PM	#3
Dominic Axelson Zilvia Junkie Join Date: Feb 2007 Location: Metamora IL Posts: 548 Trader Rating: (3) Feedback Score: 3 reviews	PM'd you sir.

10-13-2010, 01:46 PM	#4
waste_of_space Zilvia Addict Join Date: Sep 2009 Location: Fort Walton Beach, FL Posts: 657 Trader Rating: (22) Feedback Score: 22 reviews	Bump time!

10-15-2010, 05:55 PM	#5
waste_of_space Zilvia Addict Join Date: Sep 2009 Location: Fort Walton Beach, FL Posts: 657 Trader Rating: (22) Feedback Score: 22 reviews	Last bumpppp

10-15-2010, 07:53 PM	#6
smokin18 Zilvia Addict Join Date: May 2010 Location: gainesville,ga Age: 52 Posts: 969 Trader Rating: (3) Feedback Score: 3 reviews	might be intrested in the maf and suction pipe.

10-15-2010, 08:45 PM	#7
JCGator42 Leaky Injector Join Date: Oct 2010 Location: South FL Posts: 50 Trader Rating: (5) Feedback Score: 5 reviews	^ interested in tranny, c&r rad (if it fits S13) and S13 full SR harness. Going to be in Jax next weekend (live in S. FL), willing to meet half way b/w there and Navarre or something along those lines? PM me if so

10-28-2010, 10:21 PM	#8
waste_of_space Zilvia Addict Join Date: Sep 2009 Location: Fort Walton Beach, FL Posts: 657 Trader Rating: (22) Feedback Score: 22 reviews	(msg length)