WA drift car partout!!! beast parts! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

sideways asian · 10-30-2010, 12:38 AM

State/Province:Wa
Price:varies 1-1mill
Item Description: okay so apparently everyone who is interested in buying the car flake out, no big deal the car i was trying to get sold already so ill just part this car out. Im pretty firm on the prices but if you buy more than 1 item we might be able to work out a deal. all parts were bought either new or in new operating condition. DO NOT LOWBALL ME! Im not deprived of money so Im in no hurry to sell all my stuff. if any questions arise or you would like some pics just text me 425 273 0124 shipping can be arranged

s13 SR-$2500
s13 sr redtop block with around 60k miles, bought the engine as a front clip from foreign engines in lynnwood. have the receipts and all, the block will be sold including Tomei Pon cams 264, Tomei Rocker arm stoppers, ARP headstuds, BC springs and retainers, Apexi metan Head Gasket, Freddy wide oil pan, no leaks, brand name fuel pressure gauge, Nismo fuel pressure regulator, stock flywheel, and a power coated gold valve cover with a shit ton of flake. its a complete shortblock just minus clutch and tranny so every thing is there.

Turbo setup-$1000
-GT28r with less than 3k miles, only ran at less than a bar
-all turbo inlets
-XS power turbo manifold, no leaks with metal gasket and FRsport studs and nuts
-all the hardlines needed for the turbo, non OEM
-intake tube with Blitz filter
-STI 550cc injectors(new)

Motor stuff-
ACT 6 puck unsprung with a extreme dick, less than 3k miles-$350
Tial sport original 50mm BOV-$200
GARAGE AUTO HERO ray intercooler piping and intercooler-$500
(with flanges for greddy bov and tial)
Flex-a-lite dual electric fan with temp control(spendy)-$250
CX racing radiator-$150
SR radiator hoses-$40
Z32 maf-$75
SR wiring harness done by garage auto hero, plug n play setup-$300

SuperMade Kit-$1000
-Okay so im selling the Supermade instant gentlemen kit. I hope to see this go to a good home. This is your chance to own someone that 1 or 2 people have in the Northwest!

SAFC NEO great condition-$250
Greddy profec spec B boost controller-$250
Apexi N1 dual full test pipe back exhaust with GNARLY extended tips-$300
SPL toe arms(with bend)-$200
inner and outer tie rods with spacer(kazama outer, ikeya formula inner, PBM spacer)-$350
sway bars, r32 fat front and tanabe rear-$300
NEW KAAZ 2way lsd in pumpkin with new kaaz fluid-$800
Bride vios lowmax driver seat with buddy club rail-$450
Bride brix passenger seat with recaro rail-$300

thanks!
siam

Weedm · 10-30-2010, 12:52 AM

bump for you. sad to see you have to part it out

Seraphim38 · 10-30-2010, 01:02 AM

Bad ass part out. I picked up my S13 from Ray's shop today. I am considering the purchase of that Apexi NEO though I have an Enthalpy tune that I am going to get them to reflash, so I probably don't really need it.

ka24det92 · 10-30-2010, 07:48 AM

Would you consider parting out the interior

Napalm · 10-30-2010, 08:58 AM

Absolutely beautiful s13, bump for you!!

Seraphim38 · 10-30-2010, 09:08 AM

PM sent about engine

si2lv4ia0 · 10-30-2010, 10:07 AM

bump for a hot female in the first pic hahaha

hatchbaak · 10-30-2010, 11:42 AM

Clutch with an extreme dick? Wow! Free bump.

Seraphim38 · 10-30-2010, 02:06 PM

Quote:

Originally Posted by hatchbaak

Clutch with an extreme dick? Wow! Free bump.

LOL, that should be the quote of the day.

ilwhipuras · 10-30-2010, 06:47 PM

Z32 maf come with pig tails?

hardtime21 · 10-30-2010, 10:29 PM

Quote:

Originally Posted by Seraphim38

LOL, that should be the quote of the day.

I Con-cor! Lmao

Seraphim38 · 10-31-2010, 10:36 AM

Even though I might not need the engine swap as I originally thought, I still might want to pick up the Apexi Neo from you. I will make a decision on it this week and if you sell it to someone else, cool.

Thanks for calling me yesterday. You seem to be a cool guy.

MikeySand · 10-31-2010, 08:09 PM

could you post some pictures of the bride seat?

Dori_Doug · 11-01-2010, 02:03 AM

Pics of Radiator and price shipped to AZ?

sideways asian · 11-01-2010, 09:16 PM

bump. pms sent to people

thread updated

stEVOVIII · 11-03-2010, 01:11 AM

Maybe want to trade? Here's my baby, http://i193.photobucket.com/albums/z...421resized.jpg.

thenucci24 · 11-03-2010, 10:14 AM

do u still have the neo for sale and what is ur paypal?

the.rise · 11-03-2010, 04:02 PM

any chance you would wanna sell that head? or part out the cams/ras/springs/retainers? ill send you stock replacements for each as they get installed

Seraphim38 · 11-03-2010, 08:13 PM

if he was going to do a top end swap I would be first in line!!

I'd do a grand for the topend with ARP headstuds...all local...

DRFT180 · 11-04-2010, 11:52 AM

Pics of the Bride Vios please.

10-30-2010, 12:38 AM	#1
sideways asian Zilvia Member Join Date: Jan 2009 Location: seattle washington Posts: 238 Trader Rating: (10) Feedback Score: 10 reviews	drift car partout!!! beast parts! State/Province:Wa Price:varies 1-1mill Item Description: okay so apparently everyone who is interested in buying the car flake out, no big deal the car i was trying to get sold already so ill just part this car out. Im pretty firm on the prices but if you buy more than 1 item we might be able to work out a deal. all parts were bought either new or in new operating condition. DO NOT LOWBALL ME! Im not deprived of money so Im in no hurry to sell all my stuff. if any questions arise or you would like some pics just text me 425 273 0124 shipping can be arranged s13 SR-$2500 s13 sr redtop block with around 60k miles, bought the engine as a front clip from foreign engines in lynnwood. have the receipts and all, the block will be sold including Tomei Pon cams 264, Tomei Rocker arm stoppers, ARP headstuds, BC springs and retainers, Apexi metan Head Gasket, Freddy wide oil pan, no leaks, brand name fuel pressure gauge, Nismo fuel pressure regulator, stock flywheel, and a power coated gold valve cover with a shit ton of flake. its a complete shortblock just minus clutch and tranny so every thing is there. Turbo setup-$1000 -GT28r with less than 3k miles, only ran at less than a bar -all turbo inlets -XS power turbo manifold, no leaks with metal gasket and FRsport studs and nuts -all the hardlines needed for the turbo, non OEM -intake tube with Blitz filter -STI 550cc injectors(new) Motor stuff- ACT 6 puck unsprung with a extreme dick, less than 3k miles-$350 Tial sport original 50mm BOV-$200 GARAGE AUTO HERO ray intercooler piping and intercooler-$500 (with flanges for greddy bov and tial) Flex-a-lite dual electric fan with temp control(spendy)-$250 CX racing radiator-$150 SR radiator hoses-$40 Z32 maf-$75 SR wiring harness done by garage auto hero, plug n play setup-$300 SuperMade Kit-$1000 -Okay so im selling the Supermade instant gentlemen kit. I hope to see this go to a good home. This is your chance to own someone that 1 or 2 people have in the Northwest! SAFC NEO great condition-$250 Greddy profec spec B boost controller-$250 Apexi N1 dual full test pipe back exhaust with GNARLY extended tips-$300 SPL toe arms(with bend)-$200 inner and outer tie rods with spacer(kazama outer, ikeya formula inner, PBM spacer)-$350 sway bars, r32 fat front and tanabe rear-$300 NEW KAAZ 2way lsd in pumpkin with new kaaz fluid-$800 Bride vios lowmax driver seat with buddy club rail-$450 Bride brix passenger seat with recaro rail-$300 thanks! siam Last edited by sideways asian; 11-05-2010 at 10:27 AM..

10-30-2010, 12:52 AM	#2
Weedm Zilvia Addict Join Date: Nov 2008 Location: Seattle / Portland Age: 33 Posts: 902 Trader Rating: (5) Feedback Score: 5 reviews	bump for you. sad to see you have to part it out __________________

10-30-2010, 08:58 AM	#5
Napalm Zilvia Junkie Join Date: Apr 2008 Location: Florida Age: 38 Posts: 384 Trader Rating: (2) Feedback Score: 2 reviews	Absolutely beautiful s13, bump for you!! __________________ Kouki in progresss

10-30-2010, 11:42 AM	#8
hatchbaak Zilvia Member Join Date: Mar 2007 Location: Oregon Posts: 171 Trader Rating: (5) Feedback Score: 5 reviews	Clutch with an extreme dick? Wow! Free bump. __________________

11-04-2010, 11:52 AM	#20
DRFT180 Zilvia Addict Join Date: Nov 2003 Location: Louisiana Posts: 656 Trader Rating: (7) Feedback Score: 7 reviews	Pics of the Bride Vios please. __________________ S14 Build

10-30-2010, 01:02 AM	#3
Seraphim38 Zilvia Addict Join Date: Oct 2010 Location: Washington Posts: 810 Trader Rating: (6) Feedback Score: 6 reviews	Bad ass part out. I picked up my S13 from Ray's shop today. I am considering the purchase of that Apexi NEO though I have an Enthalpy tune that I am going to get them to reflash, so I probably don't really need it.

10-30-2010, 07:48 AM	#4
ka24det92 Zilvia Junkie Join Date: Feb 2009 Location: houston Posts: 324 Trader Rating: (0) Feedback Score: 0 reviews	Would you consider parting out the interior

10-30-2010, 09:08 AM	#6
Seraphim38 Zilvia Addict Join Date: Oct 2010 Location: Washington Posts: 810 Trader Rating: (6) Feedback Score: 6 reviews	PM sent about engine

10-30-2010, 10:07 AM	#7
si2lv4ia0 Leaky Injector Join Date: Jul 2009 Location: beautiful california Age: 36 Posts: 129 Trader Rating: (3) Feedback Score: 3 reviews	bump for a hot female in the first pic hahaha

10-30-2010, 06:47 PM	#10
ilwhipuras Leaky Injector Join Date: Oct 2010 Location: new york/new jersey Posts: 141 Trader Rating: (2) Feedback Score: 2 reviews	Z32 maf come with pig tails?

10-31-2010, 10:36 AM	#12
Seraphim38 Zilvia Addict Join Date: Oct 2010 Location: Washington Posts: 810 Trader Rating: (6) Feedback Score: 6 reviews	Even though I might not need the engine swap as I originally thought, I still might want to pick up the Apexi Neo from you. I will make a decision on it this week and if you sell it to someone else, cool. Thanks for calling me yesterday. You seem to be a cool guy.

10-31-2010, 08:09 PM	#13
MikeySand Zilvia Member Join Date: Feb 2008 Location: Jacksonville, FL Age: 39 Posts: 165 Trader Rating: (13) Feedback Score: 13 reviews	could you post some pictures of the bride seat?

11-01-2010, 02:03 AM	#14
Dori_Doug Join Date: Feb 2010 Location: Tucson, Arizona Posts: 39 Trader Rating: (0) Feedback Score: 0 reviews	Pics of Radiator and price shipped to AZ?

11-01-2010, 09:16 PM	#15
sideways asian Zilvia Member Join Date: Jan 2009 Location: seattle washington Posts: 238 Trader Rating: (10) Feedback Score: 10 reviews	bump. pms sent to people thread updated

11-03-2010, 01:11 AM	#16
stEVOVIII Join Date: Jan 2007 Location: Northbrook, IL/ Tucson, AZ Age: 37 Posts: 39 Trader Rating: (0) Feedback Score: 0 reviews	Maybe want to trade? Here's my baby, http://i193.photobucket.com/albums/z...421resized.jpg.

11-03-2010, 10:14 AM	#17
thenucci24 Join Date: May 2010 Location: fort wayne, in Age: 36 Posts: 37 Trader Rating: (1) Feedback Score: 1 reviews	do u still have the neo for sale and what is ur paypal?

11-03-2010, 04:02 PM	#18
the.rise Leaky Injector Join Date: Jun 2009 Location: Boston Age: 36 Posts: 79 Trader Rating: (1) Feedback Score: 1 reviews	any chance you would wanna sell that head? or part out the cams/ras/springs/retainers? ill send you stock replacements for each as they get installed

11-03-2010, 08:13 PM	#19
Seraphim38 Zilvia Addict Join Date: Oct 2010 Location: Washington Posts: 810 Trader Rating: (6) Feedback Score: 6 reviews	if he was going to do a top end swap I would be first in line!! I'd do a grand for the topend with ARP headstuds...all local...