FL Oem & Aftermarket Parts, lots of pics!

[BiGWiL787]

Parting out 96 Zenki S14 (Non-SE) w/S13 SR20DET Redtop motor. Motor, tranny, turbo and other components will be for sale also, prices and pics for those coming soon. Most of the prices listed here are firm although if you offer lower all I can do is say no right? I also have most of the interior/exterior still intact so if you need any panels, moldings, carpets, seats, etc. let me know as well. All parts are located in Oakland Park(Fort Lauderdale), Florida (Broward County) and are for pick-up only for larger parts and willing to ship the smaller more manageable parts! More pics are available upon request.Thanks for looking!

5Zigen FN01R-C (5x114.3)(Bronze) w/tires: SOLD {no part out}
Front - 17x8 +25 (clear Z brakes) Tires: Falken FK451 245/40ZR17
Rear - 17x10 +35 Tires: Falken FK452 275/40ZR17
[IMG][/IMG]

Tein Super Drift (Drift Spec Side Way Master) S14 Coilovers: $1250.00 (used in excellent cond. w/all parts incl.)
[IMG][/IMG][IMG][/IMG]

Cusco Type OS Front Strut Bar S14: $150.00
[IMG][/IMG]

SPL Parts Rear Toe Rods S14: $160.00 (chrome is pitted)
[IMG][/IMG]

SPL Parts Rear Traction Rods S14: $160.00
[IMG][/IMG]

Cusco RUCA S14: $300
[IMG][/IMG]

Factory S13 SR20DET (Redtop) MAF: $40.00
[IMG][/IMG]

300ZX N62 MAF w/Apex'i Air Filter: $100 (no part-out)(will incl. pig-tail if needed for additional fee.)
[IMG][/IMG]

GReddy V-Spec Front Mount Intercooler Kit S14 w/piping for S13 SR20DET (includes couplers & clamps): $650
[IMG][/IMG]

HKS SSQV BOV w/pipe: $100
[IMG][/IMG][IMG][/IMG]

Flex-A-Lite Dual Puller/Pusher Electric Cooling Fans: $SOLD$
[IMG][/IMG]

Koyo Aluminum Radiator w/Jegs Cap S14 : $200
[IMG][/IMG]

Samco Silicone Radiator Hoses (SR20DET): $40
[IMG][/IMG]

Greddy Oil Catch Can: $70.00
[IMG][/IMG]

SplitFire Performance Super Direct Ignition System (SR20DET): $300.00
[IMG][/IMG]

Nismo/Tomei 740cc Injectors (used on SR20DET): $500.00
[IMG][/IMG]

Apex'i Power FC w/Commander S13 SR20DET Redtop: $1000.00
[IMG][/IMG]

S14 5-Lug Conversion w/Spindles & Nismo Extended Studs in Rear: $400
[IMG][/IMG][IMG][/IMG]

Nismo 50mm Extended Studs BNIB: $SOLD$
[IMG][/IMG][IMG][/IMG]

Aluminum Driveshaft (made & cert. by Broward Powertrain) to fit S14 chassis with S13 SR20DET: $300
[IMG][/IMG][IMG][/IMG]

Nismo Metal Clutch Type LSD in S14 Pumpkin 6-Bolt (assembled and certified by Broward Powertrain): $850.00 **(does not include fluid)**
[IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG]

Factory Rear Axles S14 6-Bolt: $60.00
[IMG][/IMG]

Zenki USDM Front Headlights (No Damage): $200.00 (willing to separate pair)
[IMG][/IMG]

Zenki USDM Front Bumper Lights (Clear): $45.00
[IMG][/IMG]

[BiGWiL787]

Is there anybody interested in these parts? Make some offers all I can do is say no, we can try to bargain pricing! Please take a look again and if you know anybody who is looking for parts let them know about these.

[Ceepo]

You fail at selling anything because you wont ship anything, its really not hard to put stuff in a box and tape it up, write on it and drop it off...

[BiGWiL787]

Originally Posted by Ceepo

You fail at selling anything because you wont ship anything, its really not hard to put stuff in a box and tape it up, write on it and drop it off...

You have your opinion and your entitled to say it (Free Country), although some of us have a lot of bills to pay and have to work hard for our money to pay them. So free time is difficult to have when you work a busy schedule that doesn't give you free time during business hours to ship things. It's my choice and probably not the best one not to ship but at least I am trying. Sorry if its an inconvenience for you, the way I do business. Thanks for you interest anyways.

[Carbomb]

Originally Posted by BiGWiL787

You have your opinion and your entitled to say it (Free Country), although some of us have a lot of bills to pay and have to work hard for our money to pay them. So free time is difficult to have when you work a busy schedule that doesn't give you free time during business hours to ship things. It's my choice and probably not the best one not to ship but at least I am trying. Sorry if its an inconvenience for you, the way I do business. Thanks for you interest anyways.

call ahead and have post office or dhl, fed ex , ups, pick up
I did it all the time
if you sign up for a seller on egay you can get assloads of boxes dropped off at your HOUSE
its pretty easy to ship
do it. your shit looks legit

[BiGWiL787]

Originally Posted by Toadstool

call ahead and have post office or dhl, fed ex , ups, pick up
I did it all the time
if you sign up for a seller on egay you can get assloads of boxes dropped off at your HOUSE
its pretty easy to ship
do it. your shit looks legit

Thanks a lot man, its good to know I have support from some people! Sunds like a simple idea/concept, im definitely going to try it out. Thanks again.

[millerlight763]

PM Sent for MAF

[BiGWiL787]

Originally Posted by millerlight763

PM Sent for MAF

Relpied to your PM.

[Bernie (NoVA)]

Would you ship the injectors?

[BiGWiL787]

Originally Posted by Bernie (NoVA)

Would you ship the injectors?

I guess it would be OK to ship the injectors since they are small and light but I would add the shipping price on top of what I am already asking for the injectors, if thats OK with you then give me your zip code and I will try to quote a price for shipping?

[Bernie (NoVA)]

Originally Posted by BiGWiL787

I guess it would be OK to ship the injectors since they are small and light but I would add the shipping price on top of what I am already asking for the injectors, if thats OK with you then give me your zip code and I will try to quote a price for shipping?

22306

USPS priority would be less then $10

[ss1156ss]

I am looking for black power window door panels. I am also looking for the trim that goes around the radio, the ash tray and cig lighter. I am interested in the headlamps, are they glass or plastic? I might be interested in the aluminum radiator if it will work in an auto ( I am going to be looking for 5 spd swap but it is an auto now). I might also be interested in the suspension arms too. Please let me know about the interior pieces. I am up in Clearwater near Tampa.

[BiGWiL787]

Originally Posted by ss1156ss

I am looking for black power window door panels. I am also looking for the trim that goes around the radio, the ash tray and cig lighter. I am interested in the headlamps, are they glass or plastic? I might be interested in the aluminum radiator if it will work in an auto ( I am going to be looking for 5 spd swap but it is an auto now). I might also be interested in the suspension arms too. Please let me know about the interior pieces. I am up in Clearwater near Tampa.

The door panels have been sold already and the radio trim is cracked and broken sorry for that. The headlamps are the USDM Factory headlamps (plastic) but they are in great shape with no broken tabs. The radiator should fit in your s14 chassis the only thing I am not sure about is if you have a line from your stock radiator that goes to your auto trans? If you do then I am not sure if you can bypass that line, because this radiator does not have an opening for it. Once you become 5 speed then most definitely it will work. Although the radiator may be pending a sale. The suspension arms are also pending. Let me know what you decide and I will let you know if my sales go through or not. Thanks for your interest!

[sr20d's2k]

willing to go any lower on the power FC? PM me.

[kiiro]

i want the airfilter with z32maf and pigtail... i also want the bov with flange... how much shipped to 72023?

[BiGWiL787]

Originally Posted by kiiro

i want the airfilter with z32maf and pigtail... i also want the bov with flange... how much shipped to 72023?

I actually have a pending sale with a good offer to part out the air filter from the Z32 MAF. I can do the Z32 MAF w/pigtail for $85 plus whatever it would cost for shipping. Right now I am on vacation away from home so I am away from the parts but I will be back in a week and when I do I will give you pricing for shipping on the Z32 MAF (if your still interested) and the BOV. Thanks for your interest!

[kiiro]

Originally Posted by BiGWiL787

I actually have a pending sale with a good offer to part out the air filter from the Z32 MAF. I can do the Z32 MAF w/pigtail for $85 plus whatever it would cost for shipping. Right now I am on vacation away from home so I am away from the parts but I will be back in a week and when I do I will give you pricing for shipping on the Z32 MAF (if your still interested) and the BOV. Thanks for your interest!

What bout the Bov and flange very intrested in this ...

[BiGWiL787]

Originally Posted by kiiro

What bout the Bov and flange very intrested in this ...

As soon as I get back from my vacation I will give you a shipping quote with the total price. Thanks!

[kiiro]

Originally Posted by BiGWiL787

As soon as I get back from my vacation I will give you a shipping quote with the total price. Thanks!

When will you be back?

[claymans13]

ya man, you got a boat load of things i'd be interested in, but not really any point in contacting you since I don't live in FL.

[SupaDoopa]

How much for just front 5-lug hubs? PM me.

[yvang07]

OP what would the price be for the radiator shipped to 55076?

Thanks

[BiGWiL787]

Originally Posted by claymans13

ya man, you got a boat load of things i'd be interested in, but not really any point in contacting you since I don't live in FL.

Depending on the items let me know what your interested in. As long as your willing to pay shipping on top of what the asking price is, I might ship it out to you?

Originally Posted by kiiro

What version is the bov?

Its not the newest version its the one before it. I cant remember exactly which one. I have had it for a while now.

Originally Posted by SupaDoopa

How much for just front 5-lug hubs? PM me.

Not looking to part out just the front, trying to sell the set first. If you find somebody to buy the rears we could do it like that.

Originally Posted by yvang07

OP what would the price be for the radiator shipped to 55076?


Thanks

I have some requests for the radiator already, if they fall through I will give you a quote.

[1gr8bar10der]

interested in the nismo studs shipped to tampa 33615?

[BiGWiL787]

Originally Posted by 1gr8bar10der

interested in the nismo studs shipped to tampa 33615?

Once I get back into town on Sunday I can try to have quotes for everybody the following days.

[BiGWiL787]

Originally Posted by 1gr8bar10der

interested in the nismo studs shipped to tampa 33615?

Originally Posted by kiiro

What version is the bov?

Originally Posted by Bernie (NoVA)

22306

USPS priority would be less then $10

I have reply with a PM the total pricing with shipping. If you are still interested let me know.

[casten01]

im interested in the driveshaft.. how much shipped to 32246?

[BiGWiL787]

Originally Posted by casten01

im interested in the driveshaft.. how much shipped to 32246?

I am going to give you a exact shipping quote tomorrow but it will be roughly about $50-$75 in order to ship on top of $300 that I am asking for the driveshaft.

[BiGWiL787]

Originally Posted by casten01

im interested in the driveshaft.. how much shipped to 32246?

The exact shipping price is actually $30, cheaper than I predicted so if your still interested let me know.

[NLafave]

Wish i lived closer.... I would love the wheels and tires and the Tein's

However shipping to Canada would be retarded