ur opinion on tire/rim set up - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

pahaf · 11-03-2010, 10:51 PM

hey guys, i got myself another S14 kouki. and it in the process of getting painted right now.
here are the specs.

1997
body.
JDM front bumper
JDM rear bumper
JDM rear spoiler

suspension:
5 lug APR extended studs
front and rear strut tower bars
tanabe pro SS Type II coilovers
Techno tunnig tension rods
techno tunning aluminum subframe collars

Brakes.
300zx BMC
300zx 30mm front brakes
rear altima rotor and z31 caliper braket with S14 caliper
porterfield R4 front pads, hawks hp+ rears.

Engeine.
KA24DE
K&N filter
NGK spark plugs wires
Fidanza flywheel
Exedy OEM clutch.
Nsimo mounts

heres my question, the car is currently on 300zx rims, and its rubbing in the front. the tire is rubbing on the coilover. i put 10mm spacers, and it seems ok now. so i have to get new rims and tires.

my options are mb battles, or 5 zigen FNOR-1c,
i was hoping to go for 18x9.5 +12 on either set. i wanted to run it front and rear same size.....but i was wondering am i going to have to roll my fender and i should be ok with the coilover rubbing issue. right?

also, the JDM rear bumper....how would i go to mount a license on it? it doesnt have the holes for the screws

here are the current pictures.

11-03-2010, 10:51 PM	#1
pahaf Zilvia Member Join Date: Aug 2009 Location: Sacramento Age: 34 Posts: 181 Trader Rating: (0) Feedback Score: 0 reviews	ur opinion on tire/rim set up hey guys, i got myself another S14 kouki. and it in the process of getting painted right now. here are the specs. 1997 body. JDM front bumper JDM rear bumper JDM rear spoiler suspension: 5 lug APR extended studs front and rear strut tower bars tanabe pro SS Type II coilovers Techno tunnig tension rods techno tunning aluminum subframe collars Brakes. 300zx BMC 300zx 30mm front brakes rear altima rotor and z31 caliper braket with S14 caliper porterfield R4 front pads, hawks hp+ rears. Engeine. KA24DE K&N filter NGK spark plugs wires Fidanza flywheel Exedy OEM clutch. Nsimo mounts heres my question, the car is currently on 300zx rims, and its rubbing in the front. the tire is rubbing on the coilover. i put 10mm spacers, and it seems ok now. so i have to get new rims and tires. my options are mb battles, or 5 zigen FNOR-1c, i was hoping to go for 18x9.5 +12 on either set. i wanted to run it front and rear same size.....but i was wondering am i going to have to roll my fender and i should be ok with the coilover rubbing issue. right? also, the JDM rear bumper....how would i go to mount a license on it? it doesnt have the holes for the screws here are the current pictures.