![]() |
|
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Zilvia Member
![]() |
help squeal when clutch is release
This only happens in first gear. When I release the clutch and release it from friction point, there's some squeal. It happens only on the first few initial releases. After like 10 times or so the problem disappears. The squeal also occurs when I shut off the car. Also, the clutch pedal and shifter vibrates like hell when I start up the car.
Clutch? Transmission? |
![]() |
![]() |
Sponsored Links |
![]() |
#2 |
Leaky Injector
![]() Join Date: Jan 2003
Location: Los Angeles, CA
Posts: 130
Trader Rating: (2)
![]() ![]() ![]() Feedback Score: 2 reviews
|
A squealing noise....?
Have you ever replaced the clutch? If not, how many miles and how much abuse? Most likely its your clutch. Oh yea, and your large vibration during start could be bad motor mounts. Last edited by ZodiacSR; 08-19-2003 at 03:57 PM.. |
![]() |
![]() |
![]() |
#3 |
Post Whore!
![]() Join Date: Aug 2002
Location: Fremont, CA
Posts: 4,937
Trader Rating: (12)
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Feedback Score: 12 reviews
|
squeling can either be from loose belts. if you are sure its coming from your drivetrain, transmision in particular, it can be your pilot bearing. if its worn down, it'll make a squeeling sound. taking it out is a bitch but its cheap and should be done when your tranny is out.
|
![]() |
![]() |
![]() |
#4 |
Post Whore!
![]() |
Hmm, I was wondering about something similar...
Whenever I depress the clutch pedal, it makes a little squeak. Only when I depress it. No other sounds/vibrations or whatever. is it just a spring? do i need to oil it or something? :P TIA |
![]() |
![]() |
![]() |
#5 |
Zilvia Addict
![]() |
I kinda have the same problem but I have a new clutch ACT 6 puck I think the problem is a leaky clutch slave cylinder becuase my slave is leaking a bit...
![]()
__________________
91 Sil80-Sold, LS2 Powered 1997 240sx-Traded, 2005 350z-Sold, Whats next? Last edited by RUTH'LESSDET; 08-20-2003 at 10:32 PM.. |
![]() |
![]() |
![]() |
#6 |
Post Whore!
![]() Join Date: Aug 2002
Location: Fremont, CA
Posts: 4,937
Trader Rating: (12)
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Feedback Score: 12 reviews
|
ruth, that should take care of it. your clutch slave cylinder is probably old and leaking so ordering a new one should be the fix. the nismo unit is expensive, $160! i got an oem one from kragens for less than $10 but i still want the nismo one b/c it is slightly bigger and because its Nismo. lol.
|
![]() |
![]() |
![]() |
#7 | |
Zilvia Addict
![]() |
Quote:
Man I changed the slave but the noise still happening..... ![]()
__________________
91 Sil80-Sold, LS2 Powered 1997 240sx-Traded, 2005 350z-Sold, Whats next? |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|