PARTING OUT a spare s13 CA18DET engine - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

NeedCAforS13 · 03-11-2006, 09:27 AM

I have a RWD CA18DET thats just taking up space in my garage. I pulled it apart last night because the previous owner told me he spun a rod bearing. He was correct, #2 rod bearing was just not there. haha! So needless to say those pieces of bearing were in the motor and scratched up the other rod bearings and main bearings. **edit, upon closer inspection in the daylight and with more sleep, the crank definatly needs some work done. it has scoring damage and chunks of rod bearing stuck to it. I would send it to a machine shop before using it!** hence the cheap price.

The clutch/flywheel set up has an almost new OEM nissan KA24DE clutch on it. I drove this car before he spun the bearing and it drove nice. The clutch wasn't super strong, but it worked fine, felt stock!

Stock CA18 T25 has no shaft play, but there was oil on the intake pipe, so I think the seals might be going. Again, probably would reccomend rebuilding it, so its going CHEAP!

I'm parting out the motor, all prices listed below DO NOT include shipping. Stuff like the block is probably pick up only, unless you live in Florida and want to meet me halfway or something.

Prices:
Head $100
Head (bare) $50
Block $75
Alternator $30
A/C compressor $30
Intake manifold $50
Exhaust manifold $25
Sensors $50
Fuel Injectors (dsm blue top 450cc) $75
clutch/flywheel $100
crank $25
stock t25 $75
5 speed tranny $150

any other parts from the motor (pullies, motor mount brackets, etc...), just ask! the rods/pistons are not for sale. and I don't have any motor mounts.

I can get pictures of any parts, just ask My email is [email protected] or AIM SOlsenA6 or just reply here.

rim_bender · 03-23-2006, 08:35 AM

alternator still for sale?

s14.5slyder · 03-23-2006, 09:52 AM

will your injectors fit my s14 black top? if so do u still have them and how much for them?

Secretsquirrel · 03-23-2006, 11:12 AM

oil pan?

also interested in the injectors

NeedCAforS13 · 03-23-2006, 04:37 PM

someone emailed me already about the oil pan. and the alternator. and the injectors. If that was you, I appologize, I have them still, but I don't have time right now to pack them up, I'm in the process of changing jobs and I have 2 drift events this weekend on Friday and Sunday. After that I'll have some spare time to get the parts situation figured out. Thanks for your patience, I'll get back to you.

and no they won't fit on an SR. They're top feed (and you need side feed).

domi809 · 03-31-2011, 10:20 PM

fuel injectors still got them let me know and how much to ship to 33020

Noxy · 03-31-2011, 10:25 PM

This thread is 4 years old and he hasn't been on here for months. He's a mod on Nico though so hop on over there if you wanna ask him

Nibras · 04-18-2011, 11:14 AM

i need a ecu for CA , Pm if you know of one , i live in orlando.

03-11-2006, 09:27 AM	#1
NeedCAforS13 Zilvia Addict Join Date: Apr 2003 Location: Tampa, Florida Age: 40 Posts: 628 Trader Rating: (3) Feedback Score: 3 reviews	PARTING OUT a spare s13 CA18DET engine I have a RWD CA18DET thats just taking up space in my garage. I pulled it apart last night because the previous owner told me he spun a rod bearing. He was correct, #2 rod bearing was just not there. haha! So needless to say those pieces of bearing were in the motor and scratched up the other rod bearings and main bearings. edit, upon closer inspection in the daylight and with more sleep, the crank definatly needs some work done. it has scoring damage and chunks of rod bearing stuck to it. I would send it to a machine shop before using it! hence the cheap price. The clutch/flywheel set up has an almost new OEM nissan KA24DE clutch on it. I drove this car before he spun the bearing and it drove nice. The clutch wasn't super strong, but it worked fine, felt stock! Stock CA18 T25 has no shaft play, but there was oil on the intake pipe, so I think the seals might be going. Again, probably would reccomend rebuilding it, so its going CHEAP! I'm parting out the motor, all prices listed below DO NOT include shipping. Stuff like the block is probably pick up only, unless you live in Florida and want to meet me halfway or something. Prices: Head $100 Head (bare) $50 Block $75 Alternator $30 A/C compressor $30 Intake manifold $50 Exhaust manifold $25 Sensors $50 Fuel Injectors (dsm blue top 450cc) $75 clutch/flywheel $100 crank $25 stock t25 $75 5 speed tranny $150 any other parts from the motor (pullies, motor mount brackets, etc...), just ask! the rods/pistons are not for sale. and I don't have any motor mounts. I can get pictures of any parts, just ask My email is [email protected] or AIM SOlsenA6 or just reply here. __________________ Last edited by NeedCAforS13; 03-11-2006 at 09:45 AM..

03-23-2006, 09:52 AM	#3
s14.5slyder Join Date: Mar 2006 Location: vegas Posts: 3 Trader Rating: (0) Feedback Score: 0 reviews	injectors will your injectors fit my s14 black top? if so do u still have them and how much for them?

03-23-2006, 04:37 PM	#5
NeedCAforS13 Zilvia Addict Join Date: Apr 2003 Location: Tampa, Florida Age: 40 Posts: 628 Trader Rating: (3) Feedback Score: 3 reviews	someone emailed me already about the oil pan. and the alternator. and the injectors. If that was you, I appologize, I have them still, but I don't have time right now to pack them up, I'm in the process of changing jobs and I have 2 drift events this weekend on Friday and Sunday. After that I'll have some spare time to get the parts situation figured out. Thanks for your patience, I'll get back to you. and no they won't fit on an SR. They're top feed (and you need side feed). __________________

03-23-2006, 08:35 AM	#2
rim_bender Zilvia Junkie Join Date: Jan 2004 Location: Ga Posts: 441 Trader Rating: (0) Feedback Score: 0 reviews	alternator still for sale?

03-23-2006, 11:12 AM	#4
Secretsquirrel Zilvia Junkie Join Date: May 2005 Location: Mad Town Age: 37 Posts: 338 Trader Rating: (2) Rides Gallery: Secretsquirrel Feedback Score: 2 reviews	oil pan? also interested in the injectors

03-31-2011, 10:20 PM	#6
domi809 Join Date: Mar 2011 Location: hollywood fl Age: 34 Posts: 7 Trader Rating: (0) Feedback Score: 0 reviews	fuel injectors still got them let me know and how much to ship to 33020

03-31-2011, 10:25 PM	#7
Noxy Zilvia Member Join Date: May 2010 Location: Omaha, NE Age: 34 Posts: 192 Trader Rating: (18) Feedback Score: 18 reviews	This thread is 4 years old and he hasn't been on here for months. He's a mod on Nico though so hop on over there if you wanna ask him

04-18-2011, 11:14 AM	#8
Nibras Zilvia Junkie Join Date: Mar 2009 Location: Orlando , FL Age: 35 Posts: 450 Trader Rating: (2) Feedback Score: 2 reviews	i need a ecu for CA , Pm if you know of one , i live in orlando.