NY FS: NY S13 SR20DET Blacktop part-out!!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

s13pimp · 12-08-2010, 04:13 PM

Well, I was running MSD 72lb injectors on my sr and one of them failed, causing a lean condition in cylinder 2, which damaged the water jacket in cyl two. For all intensive purposes, the block is not salvageable. However, everything else is in great working order. Everything is for sale except for the CAS. I have everything else including:

-Stock T25 (in EXCELLENT condition) *SOLD*
-Valve cover (small dent from leaving a tool on it and closing the hood) *SOLD*
-3 coilpacks (one of the 4 is badly cracked) $25 (each)
-Coilpack harness $30
-2 knock sensors *SOLD*
-O2 sensor *SOLD*
-MAFS $35
-coolant temp sensor $10
-Wiring harness (not the greatest I've seen) *SOLD*
-Lower trans harness $50
-2 sets of stock cams $40 (each)
-Stock exhaust manifold $25
-T25 with blown seals [I think] $40
-alternator $30
-2 sets of stock fuel injectors, rails and FPR's $115 (each)
-ARP head studs (used for about 1000 miles, probably less) $75
-Transmission *SOLD*
-water pump*SOLD*
-oil pan $20
-timing chain tensioner $30
-Head (Looks excellent, but might need machining) $150
-bottom end (pistons and other components are in *GOOD* condition) (make an offer)
-Fidanza flywheel *SOLD*
-ACT 6 puck unsprung clutch (good condition) $140
-Stainless steel turbo lines (t25, t28) $60
-Passenger side door w/ mirror and door card (s13, primered black, crank windows) $65 (picked up)
-Electric driver side mirror $20
-Stance GR+ Pro springs (2 8kg front, 2 6kg rear) $50

I'm getting tired of listing things, so if you need something, just ask. I most likely have it since I have a complete swap basically. Ask for pictures if you want them. Email is the best way to get in touch. [email protected]

All prices are OBO

l2edken · 12-08-2010, 05:10 PM

stock downpipe available?

s13pimp · 12-08-2010, 05:30 PM

No, but the stock turbo elbo is. You wouldn't happen to have meant that, would you?

90hatchie · 12-09-2010, 01:44 AM

where in ny are you im lookin to pick up that turbo :-)

240boost · 12-09-2010, 08:56 AM

flywheel picture? and where in ny.

s13pimp · 12-09-2010, 10:53 AM

For all that asked, I'm located in Syracuse, NY.

Pics of flywheel:

The friction plate is a little rusty. It could be resurfaced, or you could simply order a new friction plate for $61, and then you would have a brand new flywheel.

s13pimp · 12-12-2010, 10:26 AM

Bumb to the top!

s13pimp · 12-16-2010, 03:42 PM

Bump! All prices are OBO!

negrosx13 · 12-16-2010, 04:54 PM

Where is your location iin ny??..I want the alternator

s13pimp · 12-16-2010, 05:40 PM

I'm located in Syracuse (unfortunately).

s13pimp · 12-17-2010, 06:15 PM

Bump! Added ss turbo lines!

hkspwrsr · 12-17-2010, 06:40 PM

do you have an intake suction hose? filter to turbo

s13pimp · 12-20-2010, 06:04 PM

Quote:

Originally Posted by hkspwrsr

do you have an intake suction hose? filter to turbo

Sorry, It's not for sale. Good luck finding one!

s13pimp · 12-22-2010, 04:00 PM

Bump! Reduced prices and revised list!

sr20sean · 12-22-2010, 04:51 PM

got any pics of that clutch?

s13pimp · 12-25-2010, 08:42 AM

Quote:

Originally Posted by sr20sean

got any pics of that clutch?

I sure do! I can post some pics in a little bit. Also, I'll be in New Paltz next weekend so pickup is possible if you decide you want it.

two40guy · 12-25-2010, 09:29 AM

you wouldnt happen to have an aluminum radiator for sale would you?

Razi · 12-26-2010, 03:40 PM

Do the manifolds have the stock heatsheild?

s13pimp · 12-26-2010, 04:37 PM

Sorry for the delay, but here is a picture of the clutch.

And sorry, but I have no radiator for sale.

I have only one manifold left, and I actually dont think it has a heat shield. I can check tomorrow though.

Prez · 12-26-2010, 05:28 PM

where is dent on valve cover? picture?

and would you be interested in selling just the compressor wheel off that t25... otherwise cause i know you dont wanna fuck with that snap ring.... make that t25 $30 shipped to DE 19713 and you got a deal....
and depending on location of the "dent" i might take valve cover too.

Tempnix · 12-26-2010, 07:03 PM

Sent PM.

Prez · 12-26-2010, 07:05 PM

Thanks For Valve Cover!

somedude · 12-27-2010, 09:11 PM

how much for the mafs shipped to 84015

409-ef8 · 12-27-2010, 09:21 PM

Ps pump and bracket shipped to 77662

s13pimp · 12-27-2010, 09:32 PM

Sorry, but I sold the PS pump and bracket.

The maf will be $53 shipped to your door!

409-ef8 · 12-27-2010, 09:42 PM

damn lol there like gold

somedude · 12-28-2010, 07:27 AM

Quote:

Originally Posted by s13pimp

The maf will be $53 shipped to your door!

ok cool pm'd you

s13pimp · 12-28-2010, 03:43 PM

Just sent you a pm back!

s13pimp · 12-28-2010, 05:12 PM

Quote:

Originally Posted by 409-ef8

damn lol there like gold

Haha yeah, I know! I wish you got to me like two days sooner because I ended up selling the whole setup to my buddy at "bro pricing" (which basically means I gave it to him for free hahaha).

s13pimp · 12-29-2010, 03:49 PM

Bump. Updated list.

12-08-2010, 04:13 PM	#1
s13pimp Leaky Injector Join Date: Jul 2007 Location: ny Age: 37 Posts: 86 Trader Rating: (5) Feedback Score: 5 reviews	FS: NY S13 SR20DET Blacktop part-out!!! Well, I was running MSD 72lb injectors on my sr and one of them failed, causing a lean condition in cylinder 2, which damaged the water jacket in cyl two. For all intensive purposes, the block is not salvageable. However, everything else is in great working order. Everything is for sale except for the CAS. I have everything else including: -Stock T25 (in EXCELLENT condition) SOLD -Valve cover (small dent from leaving a tool on it and closing the hood) SOLD -3 coilpacks (one of the 4 is badly cracked) $25 (each) -Coilpack harness $30 -2 knock sensors SOLD -O2 sensor SOLD -MAFS $35 -coolant temp sensor $10 -Wiring harness (not the greatest I've seen) SOLD -Lower trans harness $50 -2 sets of stock cams $40 (each) -Stock exhaust manifold $25 -T25 with blown seals [I think] $40 -alternator $30 -2 sets of stock fuel injectors, rails and FPR's $115 (each) -ARP head studs (used for about 1000 miles, probably less) $75 -Transmission SOLD -water pumpSOLD -oil pan $20 -timing chain tensioner $30 -Head (Looks excellent, but might need machining) $150 -bottom end (pistons and other components are in GOOD condition) (make an offer) -Fidanza flywheel SOLD -ACT 6 puck unsprung clutch (good condition) $140 -Stainless steel turbo lines (t25, t28) $60 -Passenger side door w/ mirror and door card (s13, primered black, crank windows) $65 (picked up) -Electric driver side mirror $20 -Stance GR+ Pro springs (2 8kg front, 2 6kg rear) $50 I'm getting tired of listing things, so if you need something, just ask. I most likely have it since I have a complete swap basically. Ask for pictures if you want them. Email is the best way to get in touch. [email protected] All prices are OBO Last edited by s13pimp; 01-06-2011 at 03:12 PM.. Reason: Added new item!

12-16-2010, 04:54 PM	#9
negrosx13 Zilvia Addict Join Date: Feb 2009 Location: Houston,tx Posts: 948 Trader Rating: (14) Feedback Score: 14 reviews	Where is your location iin ny??..I want the alternator __________________ MORE BACON STRIPS

12-26-2010, 05:28 PM	#20
Prez Zilvia Junkie Join Date: Dec 2008 Location: Newark, Delaware Posts: 466 Trader Rating: (7) Feedback Score: 7 reviews	where is dent on valve cover? picture? and would you be interested in selling just the compressor wheel off that t25... otherwise cause i know you dont wanna fuck with that snap ring.... make that t25 $30 shipped to DE 19713 and you got a deal.... and depending on location of the "dent" i might take valve cover too. __________________ "soft so you can't even enjoy it"

12-26-2010, 07:05 PM	#22
Prez Zilvia Junkie Join Date: Dec 2008 Location: Newark, Delaware Posts: 466 Trader Rating: (7) Feedback Score: 7 reviews	Thanks For Valve Cover! __________________ "soft so you can't even enjoy it"

12-08-2010, 05:10 PM	#2
l2edken Zilvia Junkie Join Date: Apr 2008 Location: NY Age: 35 Posts: 476 Trader Rating: (14) Feedback Score: 14 reviews	stock downpipe available?

12-08-2010, 05:30 PM	#3
s13pimp Leaky Injector Join Date: Jul 2007 Location: ny Age: 37 Posts: 86 Trader Rating: (5) Feedback Score: 5 reviews	No, but the stock turbo elbo is. You wouldn't happen to have meant that, would you?

12-09-2010, 01:44 AM	#4
90hatchie Banned from the Marketplace Join Date: Dec 2006 Location: yorktown hts ny Age: 36 Posts: 2,984 Trader Rating: (15) Feedback Score: 15 reviews	where in ny are you im lookin to pick up that turbo :-)

12-09-2010, 08:56 AM	#5
240boost Join Date: Jan 2010 Location: linden,nj Age: 33 Posts: 20 Trader Rating: (0) Feedback Score: 0 reviews	flywheel picture? and where in ny.

12-09-2010, 10:53 AM	#6
s13pimp Leaky Injector Join Date: Jul 2007 Location: ny Age: 37 Posts: 86 Trader Rating: (5) Feedback Score: 5 reviews	For all that asked, I'm located in Syracuse, NY. Pics of flywheel: The friction plate is a little rusty. It could be resurfaced, or you could simply order a new friction plate for $61, and then you would have a brand new flywheel.

12-12-2010, 10:26 AM	#7
s13pimp Leaky Injector Join Date: Jul 2007 Location: ny Age: 37 Posts: 86 Trader Rating: (5) Feedback Score: 5 reviews	Bumb to the top!

12-16-2010, 03:42 PM	#8
s13pimp Leaky Injector Join Date: Jul 2007 Location: ny Age: 37 Posts: 86 Trader Rating: (5) Feedback Score: 5 reviews	Bump! All prices are OBO!

12-16-2010, 05:40 PM	#10
s13pimp Leaky Injector Join Date: Jul 2007 Location: ny Age: 37 Posts: 86 Trader Rating: (5) Feedback Score: 5 reviews	I'm located in Syracuse (unfortunately).

12-17-2010, 06:15 PM	#11
s13pimp Leaky Injector Join Date: Jul 2007 Location: ny Age: 37 Posts: 86 Trader Rating: (5) Feedback Score: 5 reviews	Bump! Added ss turbo lines!

12-17-2010, 06:40 PM	#12
hkspwrsr Leaky Injector Join Date: Aug 2009 Location: Orlando Age: 39 Posts: 76 Trader Rating: (7) Feedback Score: 7 reviews	do you have an intake suction hose? filter to turbo

12-22-2010, 04:00 PM	#14
s13pimp Leaky Injector Join Date: Jul 2007 Location: ny Age: 37 Posts: 86 Trader Rating: (5) Feedback Score: 5 reviews	Bump! Reduced prices and revised list!

12-22-2010, 04:51 PM	#15
sr20sean Nissanaholic! Join Date: Apr 2009 Location: lagrangeville, ny Posts: 2,118 Trader Rating: (25) Feedback Score: 25 reviews	got any pics of that clutch?

12-25-2010, 09:29 AM	#17
two40guy Zilvia Junkie Join Date: Sep 2009 Location: binghamton,ny Posts: 442 Trader Rating: (9) Feedback Score: 9 reviews	you wouldnt happen to have an aluminum radiator for sale would you?

12-26-2010, 03:40 PM	#18
Razi Zilvia Addict Join Date: Apr 2007 Location: Corona Posts: 630 Trader Rating: (12) Feedback Score: 12 reviews	Do the manifolds have the stock heatsheild?

12-26-2010, 04:37 PM	#19
s13pimp Leaky Injector Join Date: Jul 2007 Location: ny Age: 37 Posts: 86 Trader Rating: (5) Feedback Score: 5 reviews	Sorry for the delay, but here is a picture of the clutch. And sorry, but I have no radiator for sale. I have only one manifold left, and I actually dont think it has a heat shield. I can check tomorrow though.

12-26-2010, 07:03 PM	#21
Tempnix Zilvia Member Join Date: Jul 2009 Location: Cali Desert, Its hot, Its Dry... But its ok. Age: 38 Posts: 298 Trader Rating: (1) Feedback Score: 1 reviews	Sent PM.

12-27-2010, 09:11 PM	#23
somedude Zilvia Junkie Join Date: Jun 2008 Location: Utah Age: 39 Posts: 324 Trader Rating: (10) Feedback Score: 10 reviews	how much for the mafs shipped to 84015

12-27-2010, 09:21 PM	#24
409-ef8 Join Date: Aug 2006 Location: BMT TX Age: 43 Posts: 11 Trader Rating: (0) Feedback Score: 0 reviews	Ps pump and bracket shipped to 77662

12-27-2010, 09:32 PM	#25
s13pimp Leaky Injector Join Date: Jul 2007 Location: ny Age: 37 Posts: 86 Trader Rating: (5) Feedback Score: 5 reviews	Sorry, but I sold the PS pump and bracket. The maf will be $53 shipped to your door!

12-27-2010, 09:42 PM	#26
409-ef8 Join Date: Aug 2006 Location: BMT TX Age: 43 Posts: 11 Trader Rating: (0) Feedback Score: 0 reviews	damn lol there like gold

12-28-2010, 03:43 PM	#28
s13pimp Leaky Injector Join Date: Jul 2007 Location: ny Age: 37 Posts: 86 Trader Rating: (5) Feedback Score: 5 reviews	Just sent you a pm back!

12-29-2010, 03:49 PM	#30
s13pimp Leaky Injector Join Date: Jul 2007 Location: ny Age: 37 Posts: 86 Trader Rating: (5) Feedback Score: 5 reviews	Bump. Updated list.