GA FS 500 hp SR Coupe Five lug, Wolf standalone, etc etc. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Tougegtr-33 · 12-03-2010, 03:38 PM

price drop! 10k firm

update!!! I will have the car running soon!!!

Whats up guys! My coupe finally got finished and I broke it in etc etc. I was on the dyno for the final tune and I spun the bearings. so I got the engine ripped apart. the reason being is because the crank was cut down when i got the sr20 from someone and we all thought it would be fine. so we polished it weight re-ducted it and put 0.025 bearings on it. bad idea lol. But anyway. I got a new crank and ACL bearings for the car. I sent the block, head and rods to the machine shop to inspect for any damage, there was none. Now that I have done all of this, I dont have the money to pay to get the engine back together and set it in the car. There is over 21,000 dollars in this car. I was wanting to see if anyone would trade me something for it or make me a cash offer.

I understand its not a running car. but for about $500 it would be perfect and pushing 500+ hp. I over built the engine aswell to handle alot more. and everything could support way more with ease. But just throw me and offer or trade offer. im open to anything.

I really need a car right now. My girl is coming in town from Japan Dec. 1st. so I really need something.

heres the build list. I am 100% missing alot of stuff. but as I remember ill post it.

Make: Nissan
Model: 240sx coupe
Year: 93
VIN:JN1MSS34P4PW30xxxx
Miles: 510 miles on everything except the crank and bearings. they are new
Engine: Sr20det redtop.

Cp pistons- 700
manley h beam rods- 450
briancrower 264 cams- 355
brian crower dual valve springs and retainers-240
greddy rocker arm stoppers- 90
mazworx headstud kit-200
apexi 87mm 1.1 head gasket- 230
s14 Sr20 oil pump- 120
s14 sr20 oil pick up- 70
Greddy intake manifold- 175
Tial 50mm wastegate- 540
1000cc precision injectors- 600
Wolf EMS- 1800
CX racing radiator and two 12inch fans- 220
aeromotive fuel pressure regulator with guage-190
Bosch fuel system with twin bosch pump. earl hose fuel lines all the way -1200
meth injection kit- 350
polished, weight reduckted and balanced crank 175
ACL 0.25 rod bearings acl main bearings- 180
sr20det tranny bell houseing with the ka24de tranny back- 250
Hks intercooler and pipeing-500
HKS ssqv3 bov- 120
light weight pullies-100
MAZWORX top mount turbo manifold-800
AGP billit wheel 68 mm turbo completly custom made. will handle 600 hp 38 psi and spools at 2700 rpm- 1900
custom down pipe and JVT exhaust 350
Innovate wide band with lc1 contoller 250
j30lsd 200
five lug 400
z32 tt front brakes steel braded lines 230
xxr 552 17" by 9 in the front and 18 by 9 1/2 in the back. Flat black 650
origin stlye tail lights- 100
nismo shift knob- 85
NRG 350mm deep steering wheel, NRG quick release hub and NRG hub for s13 240
SAGA gauges electronic with built in control boxes and alarms. Have boost, oil temp, water temp and oil pressure -320
Greddy oil filter and eneos oil- 55
yokohama s drive tires- 335
drift ebrake knob- 20
corner eight 32 way adjustible coilovers- 650
JDM purple jug knuts- 112
S13 coupe- 1200
Labor- 4500
f1 spec seat- 180
earl fittings and lines- 170
=$21,650 is what I have in it right now. plus the new crank and new bearings that I had to buy. but just give me offers!

Sorry, i just have the build process pics on this computer. my friend has all the new pics and dyno vids on his phone. ill get em from him tomorrow.

these vids were takin for the break in tune. so no power was being made. Ill have a power dyno vid soon!

thats all I have for now. But the car is lowered and the fenders are mildlt rolled and the interior is mostly back together. just need a passanger seat and headliner.

Trades i am looking for: anything sr swapped, anything RB swapped. Any kind of JZ swap. etc etc. but really. Stock too. of course with cash on top! let me know!

blueshark123 · 12-03-2010, 05:42 PM

oh 10k sureeeeee

KOUKIboy · 12-04-2010, 04:21 AM

That is one mad built ass SR20!!! GLWS.....

jparker7 · 12-04-2010, 08:22 AM

So hurry up with the recent pics

jacobs13 · 12-04-2010, 12:04 PM

Quote:

Originally Posted by blueshark123

oh 10k sureeeeee

Did you see the parts? Its worth 10k

Tougegtr-33 · 12-04-2010, 02:35 PM

Quote:

Originally Posted by jparker7

So hurry up with the recent pics

Im going to get them soon. the car will be running as soon as the machine shop finishes with my crank.

also i would hope its worth 10k when its running! I am asking Less than half of what I have in it.

jparker7 · 12-13-2010, 01:55 PM

so any updates

GOTTILINE · 12-13-2010, 08:01 PM

wanna sell the motor alone?

G35_S13_Coupe · 12-14-2010, 01:22 PM

finish it and keep it! youll regret getting rid of it

Corbic · 12-14-2010, 04:23 PM

paint it and people will stop laughing

theboy · 12-14-2010, 05:01 PM

got any sheets to prove 500+ hp? not being a dick, but proof will sell this thing

bbturbo87 · 12-14-2010, 06:01 PM

^

mod list shows it's good for at least close to 500..

sucks when you spend so much money and trust the build to someone who cant measure bearing clearences.

urquhartaw11 · 12-14-2010, 10:45 PM

can vouch for this man i was there through the entire build. its a nice car but as it looks its a diamond int the rough i guess you could call it, as you can see it just needs the exterior to be fixed, but that way you can make it look the way you want it not the original owner.

one_nissan · 12-15-2010, 01:33 AM

I got a 97 Lexus es300 clean with total maintenance from Lexus since the day it was purchased from the lexus dealership 200k miles but still runs like new. Trade with cash on top on my end?? Lmk pm me

b14 se-rious · 01-25-2011, 03:37 AM

Quote:

Originally Posted by Tougegtr-33

AGP billit wheel 68 mm turbo completly custom made. will handle 600 hp 38 psi and spools at 2700 rpm

...............

SlidingMooch · 01-25-2011, 07:22 PM

Quote:

Originally Posted by b14 se-rious

...............

ROFLSTOMPER I AGREE...

sr2os13abel · 01-31-2011, 12:08 PM

me too. it might start spooling at 3000 but it doesnt reach full boost till like 5500.. right?

Tougegtr-33 · 01-31-2011, 04:13 PM

its gone, sorry the turbo actually hit its full boost at 3500. but now someone else has it.

snowdrifts111 · 02-04-2011, 06:20 AM

hey man whats your number i got a 98 dodge ram 1500 and a stock s14 id trade for it but i live kinda far away

twin240s · 02-21-2011, 02:49 AM

wanting to sell the rims sep? If so pm me please. thanks

Imarvin240 · 02-21-2011, 08:43 AM

Quote:

Originally Posted by Tougegtr-33

its gone, sorry the turbo actually hit its full boost at 3500. but now someone else has it.

so what turbo comes with the car?

12-03-2010, 03:38 PM	#1
Tougegtr-33 Leaky Injector Join Date: Jan 2010 Location: Athens GA Age: 36 Posts: 75 Trader Rating: (0) Feedback Score: 0 reviews	FS 500 hp SR Coupe Five lug, Wolf standalone, etc etc. price drop! 10k firm update!!! I will have the car running soon!!! Whats up guys! My coupe finally got finished and I broke it in etc etc. I was on the dyno for the final tune and I spun the bearings. so I got the engine ripped apart. the reason being is because the crank was cut down when i got the sr20 from someone and we all thought it would be fine. so we polished it weight re-ducted it and put 0.025 bearings on it. bad idea lol. But anyway. I got a new crank and ACL bearings for the car. I sent the block, head and rods to the machine shop to inspect for any damage, there was none. Now that I have done all of this, I dont have the money to pay to get the engine back together and set it in the car. There is over 21,000 dollars in this car. I was wanting to see if anyone would trade me something for it or make me a cash offer. I understand its not a running car. but for about $500 it would be perfect and pushing 500+ hp. I over built the engine aswell to handle alot more. and everything could support way more with ease. But just throw me and offer or trade offer. im open to anything. I really need a car right now. My girl is coming in town from Japan Dec. 1st. so I really need something. heres the build list. I am 100% missing alot of stuff. but as I remember ill post it. Make: Nissan Model: 240sx coupe Year: 93 VIN:JN1MSS34P4PW30xxxx Miles: 510 miles on everything except the crank and bearings. they are new Engine: Sr20det redtop. Cp pistons- 700 manley h beam rods- 450 briancrower 264 cams- 355 brian crower dual valve springs and retainers-240 greddy rocker arm stoppers- 90 mazworx headstud kit-200 apexi 87mm 1.1 head gasket- 230 s14 Sr20 oil pump- 120 s14 sr20 oil pick up- 70 Greddy intake manifold- 175 Tial 50mm wastegate- 540 1000cc precision injectors- 600 Wolf EMS- 1800 CX racing radiator and two 12inch fans- 220 aeromotive fuel pressure regulator with guage-190 Bosch fuel system with twin bosch pump. earl hose fuel lines all the way -1200 meth injection kit- 350 polished, weight reduckted and balanced crank 175 ACL 0.25 rod bearings acl main bearings- 180 sr20det tranny bell houseing with the ka24de tranny back- 250 Hks intercooler and pipeing-500 HKS ssqv3 bov- 120 light weight pullies-100 MAZWORX top mount turbo manifold-800 AGP billit wheel 68 mm turbo completly custom made. will handle 600 hp 38 psi and spools at 2700 rpm- 1900 custom down pipe and JVT exhaust 350 Innovate wide band with lc1 contoller 250 j30lsd 200 five lug 400 z32 tt front brakes steel braded lines 230 xxr 552 17" by 9 in the front and 18 by 9 1/2 in the back. Flat black 650 origin stlye tail lights- 100 nismo shift knob- 85 NRG 350mm deep steering wheel, NRG quick release hub and NRG hub for s13 240 SAGA gauges electronic with built in control boxes and alarms. Have boost, oil temp, water temp and oil pressure -320 Greddy oil filter and eneos oil- 55 yokohama s drive tires- 335 drift ebrake knob- 20 corner eight 32 way adjustible coilovers- 650 JDM purple jug knuts- 112 S13 coupe- 1200 Labor- 4500 f1 spec seat- 180 earl fittings and lines- 170 =$21,650 is what I have in it right now. plus the new crank and new bearings that I had to buy. but just give me offers! Sorry, i just have the build process pics on this computer. my friend has all the new pics and dyno vids on his phone. ill get em from him tomorrow. these vids were takin for the break in tune. so no power was being made. Ill have a power dyno vid soon! thats all I have for now. But the car is lowered and the fenders are mildlt rolled and the interior is mostly back together. just need a passanger seat and headliner. Trades i am looking for: anything sr swapped, anything RB swapped. Any kind of JZ swap. etc etc. but really. Stock too. of course with cash on top! let me know! Last edited by Tougegtr-33; 12-04-2010 at 02:34 PM..

12-04-2010, 04:21 AM	#3
KOUKIboy Post Whore! Join Date: Jan 2007 Location: Arizona Age: 38 Posts: 2,608 Trader Rating: (23) Feedback Score: 23 reviews	That is one mad built ass SR20!!! GLWS..... __________________ [SIGPIC][/SIGPIC] http://wheelflip.com/r/Wheelwhore87

02-04-2011, 06:20 AM	#19
snowdrifts111 Join Date: Jan 2011 Location: vermont Age: 34 Posts: 33 Trader Rating: (0) Feedback Score: 0 reviews	i got things to trade hey man whats your number i got a 98 dodge ram 1500 and a stock s14 id trade for it but i live kinda far away

12-03-2010, 05:42 PM	#2
blueshark123 Post Whore! Join Date: Apr 2006 Location: North Jersey Posts: 5,481 Trader Rating: (55) Feedback Score: 55 reviews	oh 10k sureeeeee

12-04-2010, 08:22 AM	#4
jparker7 Zilvia Member Join Date: Aug 2008 Location: Mithcell, IN Posts: 265 Trader Rating: (1) Feedback Score: 1 reviews	So hurry up with the recent pics

12-13-2010, 01:55 PM	#7
jparker7 Zilvia Member Join Date: Aug 2008 Location: Mithcell, IN Posts: 265 Trader Rating: (1) Feedback Score: 1 reviews	so any updates

12-13-2010, 08:01 PM	#8
GOTTILINE Zilvia Member Join Date: May 2008 Location: LOS ANGELES Age: 36 Posts: 261 Trader Rating: (0) Feedback Score: 0 reviews	wanna sell the motor alone?

12-14-2010, 01:22 PM	#9
G35_S13_Coupe Zilvia Member Join Date: Dec 2010 Location: Iowa Posts: 262 Trader Rating: (9) Feedback Score: 9 reviews	finish it and keep it! youll regret getting rid of it

12-14-2010, 04:23 PM	#10
Corbic Post Whore! Join Date: Jul 2005 Location: US Age: 41 Posts: 8,226 Trader Rating: (8) Feedback Score: 8 reviews	paint it and people will stop laughing

12-14-2010, 05:01 PM	#11
theboy Zilvia Addict Join Date: Apr 2010 Location: Chicago Age: 36 Posts: 618 Trader Rating: (10) Feedback Score: 10 reviews	got any sheets to prove 500+ hp? not being a dick, but proof will sell this thing

12-14-2010, 06:01 PM	#12
bbturbo87 Leaky Injector Join Date: Dec 2005 Location: Houston Posts: 90 Trader Rating: (2) Feedback Score: 2 reviews	^ mod list shows it's good for at least close to 500.. sucks when you spend so much money and trust the build to someone who cant measure bearing clearences.

12-14-2010, 10:45 PM	#13
urquhartaw11 Join Date: Apr 2010 Location: Monroe, GA Age: 34 Posts: 28 Trader Rating: (0) Feedback Score: 0 reviews	can vouch for this man i was there through the entire build. its a nice car but as it looks its a diamond int the rough i guess you could call it, as you can see it just needs the exterior to be fixed, but that way you can make it look the way you want it not the original owner.

12-15-2010, 01:33 AM	#14
one_nissan Zilvia Junkie Join Date: May 2010 Location: Louisiana Age: 40 Posts: 313 Trader Rating: (14) Feedback Score: 14 reviews	I got a 97 Lexus es300 clean with total maintenance from Lexus since the day it was purchased from the lexus dealership 200k miles but still runs like new. Trade with cash on top on my end?? Lmk pm me

01-31-2011, 12:08 PM	#17
sr2os13abel Join Date: Jan 2011 Location: LOST ANGELES Age: 39 Posts: 21 Trader Rating: (0) Feedback Score: 0 reviews	me too. it might start spooling at 3000 but it doesnt reach full boost till like 5500.. right?

01-31-2011, 04:13 PM	#18
Tougegtr-33 Leaky Injector Join Date: Jan 2010 Location: Athens GA Age: 36 Posts: 75 Trader Rating: (0) Feedback Score: 0 reviews	its gone, sorry the turbo actually hit its full boost at 3500. but now someone else has it.

02-21-2011, 02:49 AM	#20
twin240s Leaky Injector Join Date: Apr 2010 Location: Biloxi, MS Age: 41 Posts: 91 Trader Rating: (0) Feedback Score: 0 reviews	wanting to sell the rims sep? If so pm me please. thanks