How to tell if o2 sensor is working??? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

hachiboy · 03-08-2011, 06:35 PM

kay, so i got an o2 sensor from a 91-92 infiniti G20 w/SR20DE, It is the skinny type with the 3 wire connection, it connects right into my sr plug perfectly.

Now my question is, How can i tell if it is working properly??? Would this o2 sensor work with the Sr20det, since the g20 has an SR20DE???

I dont have an A/F ratio gauge, so is there any other way to tell if its working properly, besides the fucked up Rich smell????

Thanks in advance.

I have an S13 Redtop Sr20det if that helps at all. . . .

eklips3 · 03-08-2011, 07:33 PM

you could try to pull a code from your ecu to see if your getting an o2 sensor code to see if its actually working.
other then that i donno

KiLLeR2001 · 03-08-2011, 07:37 PM

Not sure the compatibility of the G20 sensor with an SR20DET, but its common knowledge to use the '87 300zx Turbo oxygen sensor for the redtop SR.

Sileighty_85 · 03-08-2011, 07:39 PM

According to Nissan FAST

The SR20DET O2 sensor is not used on any other engine.
The DE P/N is different from DET P/N

So the DE wont work with the DET.

hachiboy · 03-08-2011, 08:39 PM

Damn, I seen two people online that said they used a g20 sensor n it worked, but who knows, coo, thank you!

cotbu · 03-09-2011, 12:53 AM

There's working and there's working correctly. Just because the plugs mate up means nothing. You need to know what each wire does and take note, mate that to your harness.
It should work! If it's the correct Titania 02 sensor it should work correctly. You should clear STFT and LTFT or self learn before start up for immediate notification thru consult.
With consult port and program you can watch/see when the engine enters closed loop also the activity of the 02 sensor.

I'm getting a little long winded, but it does answer your question. Just a lil technical.

03-08-2011, 06:35 PM	#1
hachiboy Leaky Injector Join Date: Mar 2009 Location: North Hollywood Posts: 111 Trader Rating: (6) Feedback Score: 6 reviews	How to tell if o2 sensor is working??? kay, so i got an o2 sensor from a 91-92 infiniti G20 w/SR20DE, It is the skinny type with the 3 wire connection, it connects right into my sr plug perfectly. Now my question is, How can i tell if it is working properly??? Would this o2 sensor work with the Sr20det, since the g20 has an SR20DE??? I dont have an A/F ratio gauge, so is there any other way to tell if its working properly, besides the fucked up Rich smell???? Thanks in advance. I have an S13 Redtop Sr20det if that helps at all. . . .

03-08-2011, 07:33 PM	#2
eklips3 Zilvia Addict Join Date: Apr 2008 Location: Calgary Canada Age: 35 Posts: 626 Trader Rating: (3) Feedback Score: 3 reviews	you could try to pull a code from your ecu to see if your getting an o2 sensor code to see if its actually working. other then that i donno __________________ 1992 240sx (RB20. 362whp@16psi)

03-08-2011, 07:37 PM	#3
KiLLeR2001 Post Whore! Join Date: Jun 2007 Location: オーランドフロリダ Posts: 7,955 Trader Rating: (46) Feedback Score: 46 reviews	Not sure the compatibility of the G20 sensor with an SR20DET, but its common knowledge to use the '87 300zx Turbo oxygen sensor for the redtop SR. __________________

03-08-2011, 07:39 PM	#4
Sileighty_85 Post Whore! Join Date: Dec 2006 Location: Misawa, Japan Posts: 6,815 Trader Rating: (8) Feedback Score: 8 reviews	According to Nissan FAST The SR20DET O2 sensor is not used on any other engine. The DE P/N is different from DET P/N So the DE wont work with the DET. __________________ 後輪駆動車１番 1989 Built SR GT2871R -363whp 1998 S14 W/RB25- 250ish (For Now) 1986 SR86 - 200ish 1990 R32 GTR - 320hp Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html Don't Buy XS-Power or SSAC Shit

03-09-2011, 12:53 AM	#6
cotbu Post Whore! Join Date: Sep 2005 Location: SWFL Age: 50 Posts: 3,318 Trader Rating: (3) Feedback Score: 3 reviews	There's working and there's working correctly. Just because the plugs mate up means nothing. You need to know what each wire does and take note, mate that to your harness. It should work! If it's the correct Titania 02 sensor it should work correctly. You should clear STFT and LTFT or self learn before start up for immediate notification thru consult. With consult port and program you can watch/see when the engine enters closed loop also the activity of the 02 sensor. I'm getting a little long winded, but it does answer your question. Just a lil technical. __________________ LoverTechnologies "Half Broken Things!"

03-08-2011, 08:39 PM	#5
hachiboy Leaky Injector Join Date: Mar 2009 Location: North Hollywood Posts: 111 Trader Rating: (6) Feedback Score: 6 reviews	Damn, I seen two people online that said they used a g20 sensor n it worked, but who knows, coo, thank you!