|
S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15. |
|
Thread Tools | Display Modes |
03-29-2011, 01:36 PM | #1 |
Zilvia Member
|
Fuel rail spacers
Hey guys. I took out my fuel rail to replace an injector. I've got three of these small, black plastic spacers. I have no idea where they went before I took off the rail. I assume two of them are for the two screws that bolt the rail to the intake manifold, but where did this third one come from? Unless it was just something left behind from the previous owner.
|
Sponsored Links |
03-29-2011, 01:47 PM | #2 |
Zilvia FREAK!
Join Date: Nov 2007
Location: dallas, TX
Age: 41
Posts: 1,245
Trader Rating: (12)
Feedback Score: 12 reviews
|
corect the spacers are for the rail, they go inbetween the rail and manifold, depending if you have SR, KA...greddy (or greddy style) manifold will determine how many you have to use. but every bolt attaching rail to manifold will need a spacer.
__________________
|
03-29-2011, 01:53 PM | #4 |
Zilvia FREAK!
Join Date: Jan 2011
Location: Irvine, So. Cal.
Posts: 1,338
Trader Rating: (16)
Feedback Score: 16 reviews
|
actually theres 3.
2 on the rail itself, and one is on that tube that runs down the plenum. my mistake. its a bracket. but there is actually 3 if im not mistaken, 1 next to valve cover, and the 2 on the plenum side.
__________________
Simplicity is the key to brilliance |
Bookmarks |
|
|