SR20DET Studs, locking washers, nuts

[mrbrody703]

Hi all,

I don't have any existing hardware to install my stock sr20det exhaust manifold, turbo, and turbo elbow. I did some searching and sourced some items that should prevent any loosening issues. It may be over kill but these seem like good insurance instead of the OE locking tabs.

*Can someone confirm that the Turbo > Elbow studs are the same as the Turbo > exhaust manifold?

9 total (5 for elbow side and 4 for exhaust manifold side)
FRSport Turbo Outlet 8mm (1.25pitch) Stud
FRSport Turbo Outlet 8mm (1.25pitch) Stud

9 total to match above
FRSport Turbo Outlet 8mm (1.25pitch) Locking Head Nut
FRSport Turbo Outlet 8mm (1.25pitch) Locking Head Nut

(This is probably the overkill part, but I want to do it right the first time around)
50 5/16” (8mm) NORD LOCK VIBRATION PROOF LOCK WASHERS
50 5/16

I would appreciate anyone pointing out any errors I've made or any comments as well.

Thanks!