wiring in new MAF plug - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

khilgers · 04-13-2011, 08:33 PM

I'm trying to fix a MAF related problem I've been having for the last month or so and I'm going through the process of elimination and the only thing I havn't tried yet is to solder on a new Z32 MAF plug in place of my existing one.

Just wanted to make sure before I wire up the new plug that I have the wiring correct. I purchased a new MAF last year for dirt cheap just to have an extra one laying around. The only difference is that (1) has 5 connectors, and (1) has 4 connectors. I've already put both MAFS in the car and it runs fine the way the car is currently wired up, so I know that they both work.

My question is that the other plug I want to solder on has a different color configuration, which I believe shouldn't matter and I should just wire it up the same way as the one on the car currently.

A-A
B-B
C-C
D-D
E-E
F-F

Below is a pic of the 2 MAFs I have as well as the current car wiring and the new plug. Please verify that I have this right before I wire in the new one. Thanks.

The one on the left is what is currently wired to the car

khilgers · 04-14-2011, 04:55 PM

so, is this correct?

Chaluska · 04-14-2011, 05:14 PM

Sound like it should be fine to me.. if both ecus work good with the 4 pin.. why would you need the 5th

godrifttoday · 04-14-2011, 05:29 PM

Ok the most important part I's finding the Power when ignition I's wired ... If u have a volt meter u can find it easy.

04-13-2011, 08:33 PM	#1
khilgers Zilvia Addict Join Date: Oct 2005 Location: Twin Cities Age: 44 Posts: 893 Trader Rating: (0) Rides Gallery: khilgers Feedback Score: 0 reviews	wiring in new MAF plug I'm trying to fix a MAF related problem I've been having for the last month or so and I'm going through the process of elimination and the only thing I havn't tried yet is to solder on a new Z32 MAF plug in place of my existing one. Just wanted to make sure before I wire up the new plug that I have the wiring correct. I purchased a new MAF last year for dirt cheap just to have an extra one laying around. The only difference is that (1) has 5 connectors, and (1) has 4 connectors. I've already put both MAFS in the car and it runs fine the way the car is currently wired up, so I know that they both work. My question is that the other plug I want to solder on has a different color configuration, which I believe shouldn't matter and I should just wire it up the same way as the one on the car currently. A-A B-B C-C D-D E-E F-F Below is a pic of the 2 MAFs I have as well as the current car wiring and the new plug. Please verify that I have this right before I wire in the new one. Thanks. The one on the left is what is currently wired to the car

04-14-2011, 05:29 PM	#4
godrifttoday Post Whore! Join Date: Jan 2004 Location: los angeles Age: 41 Posts: 3,120 Trader Rating: (82) Feedback Score: 82 reviews	Ok the most important part I's finding the Power when ignition I's wired ... If u have a volt meter u can find it easy. __________________ NEED Bolt kits for your car?

04-14-2011, 04:55 PM	#2
khilgers Zilvia Addict Join Date: Oct 2005 Location: Twin Cities Age: 44 Posts: 893 Trader Rating: (0) Rides Gallery: khilgers Feedback Score: 0 reviews	so, is this correct?

04-14-2011, 05:14 PM	#3
Chaluska Zilvia Addict Join Date: May 2008 Location: Missouri City, TX Age: 41 Posts: 997 Trader Rating: (2) Feedback Score: 2 reviews	Sound like it should be fine to me.. if both ecus work good with the 4 pin.. why would you need the 5th