clutch pedal assembly? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

redline racer510 · 04-23-2011, 09:47 AM

I am trying to assemble this s14 clutch pedal but this thing is being a B!#$H. The pedal will only be all the way up or all the way down because of the spring pressure. First question is this normal and will act normal as soon as I fill the clutch cylinder reservoir and properly install the line? Is the spring installed in the correctposition?

180wanabe1 · 04-23-2011, 10:05 AM

yeah thats normal once you get the clutch master and slave hooked up and bled it will be fine. there always normally like that when there disconnected. thats why you can push the rod out of the slave if you push on the pedal when the slaves not bolted onto the tranny.

redline racer510 · 04-23-2011, 10:16 AM

Yea it kind of scared me when it was only able to pop up or down so you say thats normal from what Im understanding.

Hywarp161 · 04-23-2011, 10:26 AM

yeah the pedal acts that way whenever there is nothing to push back on it. such as the master cylinder.

redline racer510 · 04-23-2011, 11:32 AM

ok cool because i tried on the CMC and it was still doing it so the pressure plate on the clutch pushes the on the fluid pushing back on the pedal correct?

04-23-2011, 09:47 AM	#1
redline racer510 Zilvia FREAK! Join Date: Dec 2007 Location: EARFF(earth for you idiots) Posts: 1,072 Trader Rating: (1) Feedback Score: 1 reviews	clutch pedal assembly? I am trying to assemble this s14 clutch pedal but this thing is being a B!#$H. The pedal will only be all the way up or all the way down because of the spring pressure. First question is this normal and will act normal as soon as I fill the clutch cylinder reservoir and properly install the line? Is the spring installed in the correctposition? __________________ WARNING: User has a low tolerance for stupidity. Post at your own risk.

04-23-2011, 10:16 AM	#3
redline racer510 Zilvia FREAK! Join Date: Dec 2007 Location: EARFF(earth for you idiots) Posts: 1,072 Trader Rating: (1) Feedback Score: 1 reviews	Yea it kind of scared me when it was only able to pop up or down so you say thats normal from what Im understanding. __________________ WARNING: User has a low tolerance for stupidity. Post at your own risk.

04-23-2011, 10:26 AM	#4
Hywarp161 Leaky Injector Join Date: Jan 2005 Location: Long Island NY Age: 50 Posts: 105 Trader Rating: (2) Feedback Score: 2 reviews	yeah the pedal acts that way whenever there is nothing to push back on it. such as the master cylinder. __________________

04-23-2011, 11:32 AM	#5
redline racer510 Zilvia FREAK! Join Date: Dec 2007 Location: EARFF(earth for you idiots) Posts: 1,072 Trader Rating: (1) Feedback Score: 1 reviews	ok cool because i tried on the CMC and it was still doing it so the pressure plate on the clutch pushes the on the fluid pushing back on the pedal correct? __________________ WARNING: User has a low tolerance for stupidity. Post at your own risk.

04-23-2011, 10:05 AM	#2
180wanabe1 Zilvia Member Join Date: May 2006 Location: wa Posts: 188 Trader Rating: (2) Feedback Score: 2 reviews	yeah thats normal once you get the clutch master and slave hooked up and bled it will be fine. there always normally like that when there disconnected. thats why you can push the rod out of the slave if you push on the pedal when the slaves not bolted onto the tranny.