![]() |
![]() |
#1 |
Join Date: Apr 2005
Location: San Francisco, CA
Posts: 37
Trader Rating: (0)
![]() Feedback Score: 0 reviews
|
Nor Cal - 240sx s13 coupe w/ SR20DET and lot more - $6.5k obo
240sx coupe in Nor Cal w/ a lot of real nice go fast crap - $6.5k obo.
Photos here: 240sx - a set on Flickr contact me via email at sleedoggie at gmail dot com Details 1989 Black Nissan 240sx XE S13 Coupe. Clean title, 2 owner. (I knew the original owner) NEVER been in an accident. All original sheetmetal. Could use a paint job as original paint is fading. Interior is in excellent condition. No power accessories except power steering. No A/C CA Registration paid, but will need to be smogged by next owner. Passes sniffer but needs a blind smog. ![]() SR20DET swap done by Signal Auto in Torrance (when Signal had their good mechanics from Japan) and all other parts were installed, tuned, and maintained by Technosquare in Torrance. Highlights of mods (not a complete list) GT28RS (aka Disco Potato) Turbo Jim Wolf Package - ECU remap, Cobra MAF, Air Filter. Nismo 740cc injectors HKS sr20det oil pan w. heat fins Blitz 3 inch downpipe and exhaust Magnaflow 3 inch performance catalytic converter Blitz Intercooler HKS BOV Koyo Radiator & FAL electric fan Tein SuperDrift Coilovers Tein Tie Rod Ends & Links Nismo Powerbrace Nismo LSD Defi DIN gauges (oil temp, pressure, water temp) & boost gauge Splitfire DIS Coilpack Recaro bucket (not race) seat on driver's side and yes, it's genuine w. adjustable seat rail. Sensors have pretty much all been replaced as have all the ancillaries such as water pump etc. New calipers installed w. Goodridge steel brake lines New Alipine stereo and speakers. Z32 brakes fully rebuilt and refinished by Stoptech w/ new rotors & Hawk pads New Z32 brake master cylinder s13 7 spoke rims w/ Falken Azenis tires full tread Included but not installed ACT Clutch and Pressure Plate Attain 5 lug hubs for the front. Riken Mesh Rims 15x7 17mm offset w/ BFG Comp TA full tread. This car is a sleeper minus the front intercooler and the coffee can exhaust sticking out. Car has only been boosted to 12lbs. Car is capable of higher boost. Never decided to fool with it as it has enough power as is and I'm more concerned about reliable power. The ECU is mapped for twice the boost, as is the injectors. You would need to put a stronger head gasket on the car and a boost controller, and you're set for a lot more horsepower. |
![]() |
![]() |
Sponsored Links |
![]() |
#4 |
Leaky Injector
![]() |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|