UT Rebuilt KA24DE with 5 spd trans - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Nismo_420sx · 07-16-2011, 08:56 PM

I have a KA24DE and 5 speed trans out of a 95 Nissan 240sx for sale. The engine had a stock rebuild done recently and has approx. 3,000 miles on it.

Had a full valve job done on the heads, block bored .20 over with new stock pistons and rings, crankshaft polished, new bearings, timing chain and guides, oil pump, plug wires, and belts. The motor and trans run great, clutch is good doesn't slip at all. No issues whatsoever with the whole setup. No leaks, noises or problems. Runs smooth.

I am looking to get $700 for this setup.

Evolutionz · 07-16-2011, 09:34 PM

thats really nice. ship maybe?

Nismo_420sx · 07-17-2011, 09:28 AM

I would possibly ship at buyers expense. I have no idea what it would cost though.

JayCastle · 07-17-2011, 09:48 AM

How much shipped to 91204?

Nismobound · 07-17-2011, 03:12 PM

Quote:

Originally Posted by JayCastle

How much shipped to 91204?

If you have to ask that, you probably can't afford to have it shipped if you bought it.

JayCastle · 07-17-2011, 03:19 PM

Quote:

Originally Posted by Nismobound

If you have to ask that, you probably can't afford to have it shipped if you bought it.

lol ok? nvm then

brudacille · 07-17-2011, 07:49 PM

Quote:

Originally Posted by Nismo_420sx

block bored .20 over with new stock pistons and rings

wtf?

Nismo_420sx · 07-17-2011, 10:39 PM

Quote:

Originally Posted by JayCastle

How much shipped to 91204?

From what I have seen it looks like typical shipping charges for an engine is around $500 to $600 and thats even on the lower side, unless you can find a really good deal.

So I would prefer to sell locally if at all possible, but if a buyer is willing to pay the shipping cost I could probably pallet it up and ship it.

brudacille · 07-18-2011, 07:22 AM

Looks very clean and a great price for the complete package, but wouldn't you have to increase the piston size to account for the overbore? Correct me if I'm wrong...

Evolutionz · 07-18-2011, 08:58 AM

no leaks or anything

))))

I lold at stock rings etc.

looks clean, glws

Nismo_420sx · 07-22-2011, 01:11 AM

Quote:

Originally Posted by brudacille

Looks very clean and a great price for the complete package, but wouldn't you have to increase the piston size to account for the overbore? Correct me if I'm wrong...

Yes, the new pistons and rings in the motor currently are bigger than the stock original pistons. The block was machined to match the pistons when I took it to get rebuilt. I thought that was obvious, but I guess on these forums I have to spell it out.

deco · 07-22-2011, 06:28 AM

What part of ut you in. I'm in vegas but am intrested. I'm intrested but am lemited on travle options. Thanks

Nismo_420sx · 07-22-2011, 01:45 PM

Quote:

Originally Posted by deco

What part of ut you in. I'm in vegas but am intrested. I'm intrested but am lemited on travle options. Thanks

Unfortunately I am in the Salt Lake City area. So travel from vegas would be pretty long.

deco · 07-22-2011, 08:57 PM

ya thats up there. ok thanks

07-16-2011, 08:56 PM	#1
Nismo_420sx Join Date: Jan 2008 Location: CO Age: 39 Posts: 48 Trader Rating: (0) Feedback Score: 0 reviews	Rebuilt KA24DE with 5 spd trans I have a KA24DE and 5 speed trans out of a 95 Nissan 240sx for sale. The engine had a stock rebuild done recently and has approx. 3,000 miles on it. Had a full valve job done on the heads, block bored .20 over with new stock pistons and rings, crankshaft polished, new bearings, timing chain and guides, oil pump, plug wires, and belts. The motor and trans run great, clutch is good doesn't slip at all. No issues whatsoever with the whole setup. No leaks, noises or problems. Runs smooth. I am looking to get $700 for this setup.

07-16-2011, 09:34 PM	#2
Evolutionz Leaky Injector Join Date: Apr 2011 Location: Ft Myers USA Age: 33 Posts: 76 Trader Rating: (1) Feedback Score: 1 reviews	thats really nice. ship maybe?

07-17-2011, 09:28 AM	#3
Nismo_420sx Join Date: Jan 2008 Location: CO Age: 39 Posts: 48 Trader Rating: (0) Feedback Score: 0 reviews	I would possibly ship at buyers expense. I have no idea what it would cost though.

07-17-2011, 09:48 AM	#4
JayCastle Leaky Injector Join Date: Apr 2011 Location: Socal Age: 37 Posts: 90 Trader Rating: (7) Feedback Score: 7 reviews	How much shipped to 91204?

07-18-2011, 07:22 AM	#9
brudacille Zilvia Junkie Join Date: Nov 2009 Location: York, PA Age: 40 Posts: 535 Trader Rating: (8) Feedback Score: 8 reviews	Looks very clean and a great price for the complete package, but wouldn't you have to increase the piston size to account for the overbore? Correct me if I'm wrong...

07-18-2011, 08:58 AM	#10
Evolutionz Leaky Injector Join Date: Apr 2011 Location: Ft Myers USA Age: 33 Posts: 76 Trader Rating: (1) Feedback Score: 1 reviews	no leaks or anything )))) I lold at stock rings etc. looks clean, glws

07-22-2011, 06:28 AM	#12
deco Join Date: May 2011 Location: Las Vegas Age: 49 Posts: 20 Trader Rating: (0) Feedback Score: 0 reviews	What part of ut you in. I'm in vegas but am intrested. I'm intrested but am lemited on travle options. Thanks

07-22-2011, 08:57 PM	#14
deco Join Date: May 2011 Location: Las Vegas Age: 49 Posts: 20 Trader Rating: (0) Feedback Score: 0 reviews	ya thats up there. ok thanks