![]() |
|
Engine Tech Technical discussion related to all relevant engines such as KA, SR, RB, CA, 2JZ , L24/26/28, VG, VQ, and LSx series. |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Zilvia Junkie
![]() Join Date: Jun 2011
Location: San Diego
Age: 30
Posts: 391
Trader Rating: (13)
![]() Feedback Score: 13 reviews
|
KA24E engine ticking.. HELP
I started getting a ticking noise coming from the engine. I'm not entirely sure if it's a valve, or lifter or rocker just yet.
any help would be appreciated. and thanks in advance ! VIDEO: YouTube - ‪1989 240sx KA24E ticking.‬‏ |
![]() |
![]() |
Sponsored Links |
![]() |
#4 |
Post Whore!
![]() Join Date: Aug 2002
Location: Fremont, CA
Posts: 4,937
Trader Rating: (12)
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Feedback Score: 12 reviews
|
dammit my ka24de sounds just like this right now... to the point where i took tomorrow off so that I can have 4 days to do an emergency engine swap.
would like input too. otherwise, i'm going to take off belts off certain accessories and test to hope it is just a bearing before i pull the motor out. |
![]() |
![]() |
![]() |
#7 |
Zilvia Junkie
![]() Join Date: Jun 2011
Location: San Diego
Age: 30
Posts: 391
Trader Rating: (13)
![]() Feedback Score: 13 reviews
|
I put in 1 quart of full synthetic oil and the ticking has stopped ! Thanks alot I gotta fix my oil pan leak, lol. O had a feeling it had to do with my oil pan.
|
![]() |
![]() |
![]() |
#8 |
Zilvia Addict
![]() |
dont rule it out. i got my ka24e torn apart right now that i thought had that same tick. did my oil change and it went away. then it came back really bad when i ran the car hard. replaced the timing chain the tick went away but heard a valve knock. pulled my head come to find out the guy before me did oversized valves but didnt do the work to the head. so it might be different in your case but mine was the timing chain. good luck if it comes back start to think about the timing chain
|
![]() |
![]() |
![]() |
#9 |
Zilvia FREAK!
![]() Join Date: May 2011
Location: Texas
Age: 35
Posts: 1,282
Trader Rating: (6)
![]() Feedback Score: 6 reviews
|
that def doesnt sound like the timing tick. That sounds like something metal on metal. I had the KA tick sounded like a aggressive cam that tick sounds like a knock or something since it ticks, pauses, then ticks again.
__________________
![]() Last edited by SLiDe_WaYz; 07-01-2011 at 02:09 PM.. |
![]() |
![]() |
![]() |
#10 |
Zilvia Junkie
![]() |
dude!!!!!! thats what my sohc does its so dumb. that noise comes and goes in my engine even when i have oil in car still does it and i dont lose power at all which is the weird part. so you find a solution to fix the problem??
|
![]() |
![]() |
![]() |
#11 |
Zilvia Member
![]() Join Date: Sep 2007
Location: Santa Cruz, Ca
Age: 36
Posts: 159
Trader Rating: (1)
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Feedback Score: 1 reviews
|
It's most likely just the lifters needing to be bled. 260K on my sohc and i run it hard every day with that issue. Bleed them, or don't; probably wont cause any issues.
__________________
'94 NA Z----------------'90 S13 Base Coupe |
![]() |
![]() |
![]() |
#13 |
Zilvia FREAK!
![]() |
I may use this as my sig for awhile.
![]() For the OP.. This link migh help.. http://www.nicoclub.com/archives/ka2...rs-repair.html |
![]() |
![]() |
![]() |
Bookmarks |
Tags |
s13 240sx ka24de ka24e |
|
|