CA 1993 s13.5 hatch 5speed ka24det - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

toytaco101 · 06-27-2011, 03:17 PM

THE NEW LOWERED PRICE IS $4K FIRM.... PRICED TO SELL NOT TRADE
1993 NISSAN 240sx 5 Speed ka24de
S15 front end conv. With carbon fiber hood
Side skirts, rear bumper, and 50mm rear over fenders
5 lug conv.
300zx 30mm alum. Big brake conv.(all around) With slotted and vented rotors & 1” brake master cylinder
Goodspeed Coilovers with rear upper arms and traction links and front links
17x8 +25 front, 17x9 +15 rear 5 zigen’s FNO1R-C titanium bronze
White bunny clutch setup with lightened flywheel
Rear 300zx alum. Uprights modified to fit S13 coilovers ( parking brake cable connected)
Battery relocated to trunk
Nismo reclinable bucket seats( not installed)
Rear upper sturt bars
Carbon fiber rear hatch
Custom solid motor mounts
Exhuast
Nismo 4 pt seat belts
Short shifter
TURBO KIT with
Cxracing gt28 turbo(s15 copy)
Cxracing manifold, sr20 turbo elbow, sr20 downpipe( modified to fit, with (2) o2 bungs)
Cxracing s13 sr20 intercooler piping & 28x7x2.5 intercooler
Prosport oil filter adapter plate with turbo oil feed line
Sr20 370cc injectors
Z32 n62 MAF
E-mance s13 ecu tuned for t28,370cc injectors, z32 MAF
Blitz BOV
Walbro 255lph fuel pump

THINGS THAT I HAVENT DONE
Install bucket seats
Redo exhaust from downpipe back to 3”
Trim rear original fender that sits underneath the 50mm over fender
Interior need some TLC
Minor body work on doors and rear bumper
THE BADS
SALVAGES TITLE and the things I haven’t done yet…
Replace turbo exhaust manifold gasket ( I got lazy when I installed turbo kit and didn’t put new gasket, used old one and now has small leak)
Rear tires might need replacing, front have about 30-40%
Rotors are rusting from car sitting for acouple months
Back seat are not installed but have and am giving with car
ALSO HAVE
Extra ka24de engine( needs rebuild)( giving with car not selling separate)
A lot of stock parts that I removed but will give with the car, cause I don’t need no more
**** Car runs and is drivable but would really recommend redoing exhaust before using as DD..***
NEW Price is $4k FIRM No lower and not the trade value... LOOLKING TO SELL NOT TRADE AT THAT PRICE..
Located near LA... PM me if have any questions
*** PLEASE SERIOUS BUYERS ONLY***
Reason for selling is I lost interest, dont have time and money to finsh car....

SpeedForce_350Z · 06-27-2011, 04:49 PM

Not bad, has a good amount of parts to get your asking price. Goodluck with the sale!

toytaco101 · 06-28-2011, 12:12 AM

Thanks..... Alot of parts and time...

conekiller · 06-28-2011, 06:03 PM

Why is it a salvage?

toytaco101 · 06-28-2011, 07:02 PM

Never looked in to it, i bought it with the slavage title completely stock before i built it... Was looking to build a little drift car that looked good driving on the road.. But interest, money and time went out the window. LOL

redmann813 · 06-29-2011, 12:29 PM

I want this so bad its not even funny. Lemme try and figure somethin out...

conekiller · 06-29-2011, 02:47 PM

could i ask why has it been stting for a couple months?

toytaco101 · 06-29-2011, 11:12 PM

As time went by i started to work on it less and less and less and now that it just needs acouple things left my interest for it isnt really there like it use to be... To much time and money went it to and now i guess u can say im burnt out from working on it to much that its just been sitting there since i last worked on it.... looking to sell to pay off some bills....

toytaco101 · 07-03-2011, 05:18 PM

Bbbuummmpppp....

ayoseaan · 07-05-2011, 02:20 AM

Beautiful.

LuckyRPS13 · 07-05-2011, 11:59 PM

clean car very close to what i am doing with my hatch. what brand are those fenders? And do you have any side profile shots to show the wheel fittament? just wondering to give me a heads up on what i will be getting for myself. Bump for a clean S13.5

toytaco101 · 07-06-2011, 08:41 PM

Thanks guys.. I thought more people would have been interested.. I mean I know it does need it's little things here and there but for the parts and upgrades it has the price I set was to sell... I spent well over wat i'm asking, just trying to get some of that back and pay some bills.. LOL.....

LuckyRPS13 · 07-07-2011, 04:13 AM

well if i did not have the wheels rolling on my project i would have offered my 2001 honda Prelude in trade.

WhipsGoneWild.net · 07-07-2011, 06:28 PM

SWOW i def want 15 front on mine lol

glws

LuckyRPS13 · 07-07-2011, 09:04 PM

Not trying to thread jack but whipsgonewild i have one that i am trying to sell. i will pm you...

Free bump lol i am suprized it has not sold. i would say come tax time you will sell it fast.

toytaco101 · 07-11-2011, 03:31 PM

New lowered price..... Priced to sell...

06-27-2011, 03:17 PM	#1
toytaco101 Leaky Injector Join Date: Dec 2009 Location: LA Posts: 70 Trader Rating: (2) Feedback Score: 2 reviews	*LOWERED PRICE 1993 s13.5 hatch 5speed KA-T* $4k FIRM THE NEW LOWERED PRICE IS $4K FIRM.... PRICED TO SELL NOT TRADE 1993 NISSAN 240sx 5 Speed ka24de S15 front end conv. With carbon fiber hood Side skirts, rear bumper, and 50mm rear over fenders 5 lug conv. 300zx 30mm alum. Big brake conv.(all around) With slotted and vented rotors & 1” brake master cylinder Goodspeed Coilovers with rear upper arms and traction links and front links 17x8 +25 front, 17x9 +15 rear 5 zigen’s FNO1R-C titanium bronze White bunny clutch setup with lightened flywheel Rear 300zx alum. Uprights modified to fit S13 coilovers ( parking brake cable connected) Battery relocated to trunk Nismo reclinable bucket seats( not installed) Rear upper sturt bars Carbon fiber rear hatch Custom solid motor mounts Exhuast Nismo 4 pt seat belts Short shifter TURBO KIT with Cxracing gt28 turbo(s15 copy) Cxracing manifold, sr20 turbo elbow, sr20 downpipe( modified to fit, with (2) o2 bungs) Cxracing s13 sr20 intercooler piping & 28x7x2.5 intercooler Prosport oil filter adapter plate with turbo oil feed line Sr20 370cc injectors Z32 n62 MAF E-mance s13 ecu tuned for t28,370cc injectors, z32 MAF Blitz BOV Walbro 255lph fuel pump THINGS THAT I HAVENT DONE Install bucket seats Redo exhaust from downpipe back to 3” Trim rear original fender that sits underneath the 50mm over fender Interior need some TLC Minor body work on doors and rear bumper THE BADS SALVAGES TITLE and the things I haven’t done yet… Replace turbo exhaust manifold gasket ( I got lazy when I installed turbo kit and didn’t put new gasket, used old one and now has small leak) Rear tires might need replacing, front have about 30-40% Rotors are rusting from car sitting for acouple months Back seat are not installed but have and am giving with car ALSO HAVE Extra ka24de engine( needs rebuild)( giving with car not selling separate) A lot of stock parts that I removed but will give with the car, cause I don’t need no more Car runs and is drivable but would really recommend redoing exhaust before using as DD..* NEW Price is $4k FIRM No lower and not the trade value... LOOLKING TO SELL NOT TRADE AT THAT PRICE.. Located near LA... PM me if have any questions * PLEASE SERIOUS BUYERS ONLY* Reason for selling is I lost interest, dont have time and money to finsh car.... Last edited by toytaco101; 07-11-2011 at 03:29 PM.. Reason: missing locating

07-07-2011, 06:28 PM	#14
WhipsGoneWild.net Zilvia Addict Join Date: Oct 2010 Location: PA Posts: 984 Trader Rating: (18) Feedback Score: 18 reviews	SWOW i def want 15 front on mine lol glws __________________

06-27-2011, 04:49 PM	#2
SpeedForce_350Z Zilvia Member Join Date: Jul 2006 Location: SoCal Posts: 248 Trader Rating: (17) Feedback Score: 17 reviews	Not bad, has a good amount of parts to get your asking price. Goodluck with the sale!

06-28-2011, 12:12 AM	#3
toytaco101 Leaky Injector Join Date: Dec 2009 Location: LA Posts: 70 Trader Rating: (2) Feedback Score: 2 reviews	Thanks..... Alot of parts and time...

06-28-2011, 06:03 PM	#4
conekiller Join Date: Oct 2010 Location: NORCAL Posts: 18 Trader Rating: (0) Feedback Score: 0 reviews	Why is it a salvage?

06-28-2011, 07:02 PM	#5
toytaco101 Leaky Injector Join Date: Dec 2009 Location: LA Posts: 70 Trader Rating: (2) Feedback Score: 2 reviews	Never looked in to it, i bought it with the slavage title completely stock before i built it... Was looking to build a little drift car that looked good driving on the road.. But interest, money and time went out the window. LOL

06-29-2011, 12:29 PM	#6
redmann813 Join Date: Jun 2011 Location: tomball,tx Posts: 15 Trader Rating: (0) Feedback Score: 0 reviews	I want this so bad its not even funny. Lemme try and figure somethin out...

06-29-2011, 02:47 PM	#7
conekiller Join Date: Oct 2010 Location: NORCAL Posts: 18 Trader Rating: (0) Feedback Score: 0 reviews	could i ask why has it been stting for a couple months?

06-29-2011, 11:12 PM	#8
toytaco101 Leaky Injector Join Date: Dec 2009 Location: LA Posts: 70 Trader Rating: (2) Feedback Score: 2 reviews	As time went by i started to work on it less and less and less and now that it just needs acouple things left my interest for it isnt really there like it use to be... To much time and money went it to and now i guess u can say im burnt out from working on it to much that its just been sitting there since i last worked on it.... looking to sell to pay off some bills....

07-03-2011, 05:18 PM	#9
toytaco101 Leaky Injector Join Date: Dec 2009 Location: LA Posts: 70 Trader Rating: (2) Feedback Score: 2 reviews	Bbbuummmpppp....

07-05-2011, 02:20 AM	#10
ayoseaan Join Date: Jun 2011 Location: Milpitas/San Jose Age: 30 Posts: 8 Trader Rating: (0) Feedback Score: 0 reviews	Beautiful.

07-05-2011, 11:59 PM	#11
LuckyRPS13 Zilvia FREAK! Join Date: Mar 2009 Location: Louisville Ky Age: 42 Posts: 1,152 Trader Rating: (23) Feedback Score: 23 reviews	clean car very close to what i am doing with my hatch. what brand are those fenders? And do you have any side profile shots to show the wheel fittament? just wondering to give me a heads up on what i will be getting for myself. Bump for a clean S13.5

07-06-2011, 08:41 PM	#12
toytaco101 Leaky Injector Join Date: Dec 2009 Location: LA Posts: 70 Trader Rating: (2) Feedback Score: 2 reviews	Thanks guys.. I thought more people would have been interested.. I mean I know it does need it's little things here and there but for the parts and upgrades it has the price I set was to sell... I spent well over wat i'm asking, just trying to get some of that back and pay some bills.. LOL.....

07-07-2011, 04:13 AM	#13
LuckyRPS13 Zilvia FREAK! Join Date: Mar 2009 Location: Louisville Ky Age: 42 Posts: 1,152 Trader Rating: (23) Feedback Score: 23 reviews	well if i did not have the wheels rolling on my project i would have offered my 2001 honda Prelude in trade.

07-07-2011, 09:04 PM	#15
LuckyRPS13 Zilvia FREAK! Join Date: Mar 2009 Location: Louisville Ky Age: 42 Posts: 1,152 Trader Rating: (23) Feedback Score: 23 reviews	Not trying to thread jack but whipsgonewild i have one that i am trying to sell. i will pm you... Free bump lol i am suprized it has not sold. i would say come tax time you will sell it fast.

07-11-2011, 03:31 PM	#16
toytaco101 Leaky Injector Join Date: Dec 2009 Location: LA Posts: 70 Trader Rating: (2) Feedback Score: 2 reviews	New lowered price..... Priced to sell...