Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk

Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 08-26-2011, 09:46 PM   #1
zerocoolalmi
 
Join Date: Jan 2010
Location: quebec plessisville
Age: 34
Posts: 44
Trader Rating: (0)
zerocoolalmi is an unknown quantity at this point
Feedback Score: 0 reviews
rb25 overheating

When I'm running my RB25 on idle or High RPM it get's hot real fast. The Upper RAD hose is HOT and
the bottom one is cold... I was not just of what could be broke beetween the Waterpump or the
Thermostat ?

So I took off the thermostat and tried running the engine again. The Temp Gauge don't climb over
the mid bar... so it's perfect ? But after a couple of metal to metal the temp gauge goes back to the
top.. because the coolant does'nt have the time cool down in the rad before going back into the engine

I tried my stock thermostat into boiling water at home... and the thermostat is working.. so I put
everything back in place... and still Temp Gauge goes back in the red"

Someone have any ideas ?
zerocoolalmi is offline   Reply With Quote
Sponsored Links
 

Bookmarks



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 01:52 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net