TX SR Goodies you want and need =]...Greddy/RSR/OEM

[OkiDori17]

Hello guys,

I am currently building my motor and have upgraded just about everything, so most of the stock parts I have, I have no use for. I'm in the Army and live in the barracks, and have no room for everything so I need to get rid of it. Plus, I'm just trying to get that last bit of money to finish my build and get my baby running again. Everything is OBO, but please no crazy low-balling. Everything was in good and working condition when pulled off. I don't like dirty parts, and I'm sure you don't either, so everything will be properly cleaned before shipment. Everything is located in Killeen, TX. Local pickup is fine, just PM or text me and we'll work something out.

If you have any questions just PM me, I'm online fairly often, or if you want a faster response text me at (254) 383-1415.

Stock ECU (E5 type)

By okidori17 at 2012-05-22

By okidori17 at 2012-05-22

Stock MAF

By okidori17 at 2012-05-22

By okidori17 at 2012-05-22

Coilpacks (I have 2 sets)

By okidori17 at 2012-05-22

By okidori17 at 2012-05-22

Coilpack Harness (I have 2)

By okidori17 at 2012-05-22

Stock Cams (cam gears not included)

By okidori17 at 2012-05-22

Stock Rods

By okidori17 at 2012-05-22

Stock Pistons

By okidori17 at 2012-05-22

By okidori17 at 2012-05-22

Stock Fuel Rail

By okidori17 at 2012-05-22

Stock Fuel Injectors (still on the fuel rail, if needed they can be separated)

Stock Intake Manifold

By okidori17 at 2012-05-22

By okidori17 at 2012-05-22

Stock Exhaust Manifold

By okidori17 at 2012-05-22

By okidori17 at 2012-05-22

Stock Turbo Outlet

By okidori17 at 2012-05-22

Stock Clutch and Pressure Plate (still have A LOT of life in it)

By okidori17 at 2012-05-22

By okidori17 at 2012-05-22

Stock Struts and Springs (need new boots, but other than that they work fine)

By okidori17 at 2012-05-22

Brand New TB28 turbo

By okidori17 at 2012-05-22

By okidori17 at 2012-05-22

Brand New OEM Turbo Gaskets

By okidori17 at 2012-05-22

BNIB AJP Lowering Springs

By okidori17 at 2012-05-22

By okidori17 at 2012-05-22

Apexi Intake Piece

By okidori17 at 2012-05-22

A/C Bracket

By okidori17 at 2012-05-22

Trust/Greddy Downpipe mated to RS*R 3" Catback (All welded, no muffler/resonator/cat just 3" straight pipes. Sounds AMAZING, but sorry no shipping)

Stock Diff (non-welded)

Stock Flywheel


I'll be updating frequently. I know I probably missed something. If you need something don't hesitate to ask.

Thanks,
Richard