rb25 will not go into gear - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

d0pe240 · 01-17-2012, 02:29 PM

i swaped in an rb25 series 1 into an s13. i replaced the clutch/pressure plate with an 300zx na and a new rb slave cylinder before swapping it. got the clutch set from a friend, matched up fine and read it would work. bled the system, fired it up and nothing. adjusted the pedal and actually helped for about 2 weeks, pedal was stiffer than before. it would go into all gears, but needed force. then one day, tired to put it into gear and would not go. replaced the clutch master with an autozone one to see if it was the problem, bled the system and nothing. the pedal still feels soft. just dont know what happened. i tired looking for threads and couldnt find anything similar to my problem. any help would be appreciated!

01-17-2012, 02:29 PM	#1
d0pe240 Zilvia Junkie Join Date: Jun 2007 Location: lol Posts: 459 Trader Rating: (3) Feedback Score: 3 reviews	rb25 will not go into gear i swaped in an rb25 series 1 into an s13. i replaced the clutch/pressure plate with an 300zx na and a new rb slave cylinder before swapping it. got the clutch set from a friend, matched up fine and read it would work. bled the system, fired it up and nothing. adjusted the pedal and actually helped for about 2 weeks, pedal was stiffer than before. it would go into all gears, but needed force. then one day, tired to put it into gear and would not go. replaced the clutch master with an autozone one to see if it was the problem, bled the system and nothing. the pedal still feels soft. just dont know what happened. i tired looking for threads and couldnt find anything similar to my problem. any help would be appreciated!