How much is it worth?

[ElKadetto]

I buy a S15 steering wheel, and i wanne sale my S14 kouki steering wheel. How much is it worth?

Looks like that, only a little more used but in good condition.

[hadokenny]

i would pay u around 150 dollar shipped for it if the air bag is still good...

[old_s13]

But its not even 3-spoke.. atleast find a wheel that is 3-spoke and has airbag, if thats what you want to do.

Personally, I dont see the interest in the S15 steering wheel.

[FRpilot]

b/c its JDM.. ppl buy anything thats jdm. thats why you see ppl wanting s15 steering wheels, s15 shift knobs, s13 'silvia' steering wheels. etc.. i myself, would get an aftermarket steering wheel like momo..

[hadokenny]

Originally posted by FRpilot
b/c its JDM.. ppl buy anything thats jdm. thats why you see ppl wanting s15 steering wheels, s15 shift knobs, s13 'silvia' steering wheels. etc.. i myself, would get an aftermarket steering wheel like momo..

but momo doesnt have airbag...

S15 steering wheel does have airbag...so that in case u crash, the momo logo wont be the last thing u'll ever see.

[zero.counter]

Originally posted by hadokenny
i would pay u around 150 dollar shipped for it if the air bag is still good...

Really? I will be doing the same thing in two weeks and have already unhooked the airbag system.

[OptionZero]

ElKadetto
This is off topic, but do you think u could get a Z-edition rear bumper and valence for me? Or point me in a direction towards getting one?

Does anyone make a fiberglass knockff even? I heard that there was a British company that made one, i even have pictures, just no website.

[mike13]

is that a dash kit or paint in that pic?

[old_s13]

Originally posted by hadokenny
but momo doesnt have airbag...

S15 steering wheel does have airbag...so that in case u crash, the momo logo wont be the last thing u'll ever see.

and that is why my car has a roll cage and harnesses, so that the airbag is not the last thing i'll ever see.

do a read-up on the NHTSA web site, you can see some of the crash tests they did on cars like the S13, S14, and Z32. Amazingly enough, the S13 had safer crash test results than both the S14 and Z32 (in order of safety, respectively).

[ElKadetto]

First, in germany its not allowed to remove the airbag if you have driver and passenger airbag. I only can buy the S15 wheel, there is no other company that offers airbag steering wheels for the S14.

@ OptionZero, sure i can look for you but its very rare here too. How many you wanne pay for this part?

@ FRPilot, i dont say its JDM, its GDM

@ mike13, its a S14 Z Edition, its the stock dash in this version.

[andrave]

actually there is a nismo wheel that is pimp as hell and came with an airbag but its quite rare, especially stateside.

And yes, my 89 has no airbag but had excellent crash ratings. Besides, I've been in several accidents with an airbag and both hurt me more than the helped.

[OptionZero]

Thanks man, i just want a price. I figure it'll be around...700 shipped?
Probably can't afford it now, but it would be good to know where i could get one...

[KoukiS14]

I wish they had given us the 200sx here. . gawd I LOVE the Z edition. .

btw. . I paid $40 USD for my "euro / jdm / 200sx / silvia / 180sx / R33 GT-R" wheel. . With shipping, about ~90 bucks.





and it was in BRAND NEW condition.

[KoukiS14]

Originally posted by ElKadetto
I buy a S15 steering wheel, and i wanne sale my S14 kouki steering wheel. How much is it worth?

Looks like that, only a little more used but in good condition.

[img]http://www.200sxfan.de/assets/images/200sx_innen_gross_2.JPG[img]

Gawd I love your car. . the way I see it. .200sx > Silvia > 240sx. .
(heated seats would have been wonderful)
I look at the blank switches everyday and think "f*uck you, Nissan"

Welcome to Zilvia, ElKadetto!!!!

You have anymore pics?



edit: wow. . I just realized those blanks aren't for the heated seats. . I didn't notice before that it takes up one of the cupholders. .well, I GAIN a cupholder

and it still uses the old mirror switch. . it's so weird why tiny details are different.

[ElKadetto]

@ KoukiS14, the Z Editon is not my car, i have a Sport Line.

This is my S14 Sport Line



and this is the S14 i take the picture from, the Z Edition



And here you can find more pictures from the Z Edition

Ronny's Homepage

[OptionZero]

yeah, i have ALOT of Z-edition pictures, makes me drool all the more.
I wanna be the first to pair a JDM Kouki bumper with a German Z-edition rear bumper, super DUPER clean, yet rare as a unicorn.

[NiteKids]

Is that center consonle on the Z-Edition painted Silvier or is that brushed aluminum? I think it looks pretty good. I'd maybe get the brushed aluminum interior peices but being those on stick on might be pretty tackey.

[KoukiS14]

ElKadetto: I guess I HAVE seen your ride before. . I LOVE it. . I realllly dig the autech grill, as well. Both of those cars are sex.

I'm also fond of the z-edition rear skirt. . wish it'd fit a USDM S14 properly. (if I could find a way to make a U.S. plate fit with the rear fog insert piece, I'd do it haha)

[KoukiS14]

Originally posted by NiteKids
Is that center consonle on the Z-Edition painted Silvier or is that brushed aluminum? I think it looks pretty good. I'd maybe get the brushed aluminum interior peices but being those on stick on might be pretty tackey.

It's painted. (from the factory). .
which is really the same way they color other interior pieces. . (I noticed my mom's beige interior in her Altima is actually just painted on. . those pieces are black plastic haha)

[OptionZero]

Fine, short of the entire rear bumper, the valence alone will fit, right? That can't be that mu ch, its just a lip...if u could find one...

[NiteKids]

I was correct. Looks pretty damn tackey. If I were to acually buy it i'd only get the for the center console minus the AC cover and ash trash cover. All that extra looks way too much and cheap looking.

[KoukiS14]

Originally posted by OptionZero
Fine, short of the entire rear bumper, the valence alone will fit, right? That can't be that mu ch, its just a lip...if u could find one...

You could probably MAKE it fit. .but I was just saying that it seems to ONLY fit with the rear fog insert for euro plates.
Looks made specially for the european market. I don't think it would look right at all on a USDM 240sx.

[ElKadetto]

@ OtionZero. If you buy the rear lip from your Nissan dealer you pay 550€ (600$) not painted and without the 16% tax. Its a special part made from a aftermarket company for Nissan. I only can look around and if somebody crash his car you can find one of this items. Thats the way i find mine. I think you have to pay 250€ (270$) for a used lip.
But i think you can install the valence alone, without the ugly german bumper. USDM and EUDM Bumper looks the same for me.

@ KoukiS14. Thanks, my car is nearly stock but i work on it!
We have the SR20DET, but you can just swap the engine use wheels and exhaust systems you want and nobody cares. In germany the cops dont like tuned cars, ist pretty hard to legalize the real cool tuning parts and if they come from USA or Japan its nearly impossible. But i tune cars since 1997, so i know some shops in germay they legalize me many things. I hope next year my car wear the ings+1 body kit and the SSR rims.

[OptionZero]

I kinda like the German rear bumper w/ the extra lights, but yeah...lip looks like it should fit, maybe a little trimming around the license plate area.

If its a urethane piece, thats not too bad. Please do let me know if you find a used piece. $600 for just a lip is much, but $275 is reasonable for a piece that rare from Europe.

[KoukiS14]

ElKadetto: I dig the INGs bodykit. . it will look very nice on your SX.
The rear bumper is the same as the USDM rear bumper / earlier zenki Silvia rear bumper. . but the euro bumper has a cutout for the rear fogs. . (I saw a japanese catalog where you could order that part. . you could also order 240sx badging, or 200sx badging with a Nissan front hood badge. . haha they put our badging on, and we put Silvia stuff on ours)

I think there's a good chance the rear valance would fit. . . but I'm not positive. . it appears to be made to work with the extra rear fog / license holder of the euro bumper. I'm not sure tho. . never seen a 200sx in person.


Keep up the good work!

[OptionZero]

i soooo want the entire bumper/valence...but if a lip is 600 new, then the bumper with it would cost me well over a G....and thats just too much, even if it would look sweeeeeet. sigh...one day

[SimpleS14]

Do you guys think I can get away with importing a 200SX and labeling it a 240SX? I mean...the body is exactly the same and I work around emissions. Anyways....you can sell that steering wheel for $100-$260.

KoukiS14 - What kind of stereo is that? I never seen it before...is it OEM?


BTW...I spray painted my center dash and gauge cluster...came out very nice.

[KoukiS14]

Originally posted by 95KoukiS14
Do you guys think I can get away with importing a 200SX and labeling it a 240SX? I mean...the body is exactly the same and I work around emissions. Anyways....you can sell that steering wheel for $100-$260.

KoukiS14 - What kind of stereo is that? I never seen it before...is it OEM?


BTW...I spray painted my center dash and gauge cluster...came out very nice.

I was thinking the same. . a silvia is pretty obviously not USDM. . .but I bet the 200sx has more similarities structurally. And, it's optionally LHD. . may be able to pass it off easier.


The stereo is OEM. . it's identical to my factory deck that came with the car (LE model had "premium" sound) . . the decks are really crappy, imo. . my factory clarion deck crapped out on me. (It's the SAME deck you'd find in a Maxima SE of the same year, or a Pathfinder. . etc etc). . the deck in my car now tho, is from a 98 Altima. It's the same, but has no CD changer controls or tape deck. (bought it off ebay for cheap). . they look the same.

[Muzzy]

off topic but...u guys ever notice that we try to copy...well not copy..but try to get our cars all JDM or GDMed up but no one else in the world wants to go USDM??

like...no LHD conversions...no 240sx conversion(kinda dumb i know)
or they dont want out junk ass pick-ups or big ass SUVs on DUBS.

we even (not necessaraily "we" but u know who i mean) JDM or EDM(euro domestic market..did i make that up??) to stupid american cars...like euro lights on cavilers and pick-ups...u know stupid ****...or putting kanji or an SIR badge on a caviler. (sorry...caviler is the first thing that comes to mind..prolly cuz i see a lot of that crap)

not that i dont like JDM stuff or GDM stuff...wutever... on japanese cars or european cars...it all koo...its jus an observation

[RBBaby]

lol. dude, they dont want us for THEIR cars, they want GM and Ford stuff. there are crazy lowriders in japan, and muscle cars are popular the world round.