ka24de not staying on. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

AnthonysSilvia · 01-20-2012, 10:18 PM

hey just just swaped in my ka24de because i blew my last one. Now i have everything installed, and wires and plumbing, and now my car wont stay on! could this be because of timing??? please let me know if you know something.

Pro ViZIon · 01-20-2012, 11:41 PM

You didnt really explain what is going on but i would say check all your wiring and all of your grounds. Also check your timing. Get a timing gun and see.

AnthonysSilvia · 01-21-2012, 10:23 AM

my car will start but i have to keep on tapping the throttle to keep it on, all my grounds and wiring are fine.

Pro ViZIon · 01-21-2012, 10:34 AM

Check your tps and see if its set correctly. Also make sure your getting enough fuel. Check all injectors and fuel pump.

ardeine · 02-27-2012, 12:51 AM

how do you check if the tps is set wrong?? i have the same problem but seems like it might be timing because the engine shakes rough when i let go of the gas. could it be timing? seems like it is due to not bolting on the cams right or maybe something called the idle gear i have heard. any help is appreciated

mr.man.performance · 02-28-2012, 01:02 PM

When you start it, does it sound like a loping v8? You might be a tooth off on timing. Also, check your vacuum lines.

Dorifto Machine · 02-28-2012, 02:27 PM

Check for Vacuum Leaks as well.

01-20-2012, 10:18 PM	#1
AnthonysSilvia Zilvia Member Join Date: Apr 2011 Location: Los Angeles Age: 33 Posts: 272 Trader Rating: (1) Feedback Score: 1 reviews	ka24de not staying on. hey just just swaped in my ka24de because i blew my last one. Now i have everything installed, and wires and plumbing, and now my car wont stay on! could this be because of timing??? please let me know if you know something.

01-20-2012, 11:41 PM	#2
Pro ViZIon Zilvia Junkie Join Date: Dec 2008 Location: Las Vegas, NV Age: 34 Posts: 415 Trader Rating: (0) Feedback Score: 0 reviews	You didnt really explain what is going on but i would say check all your wiring and all of your grounds. Also check your timing. Get a timing gun and see. __________________ 1990 Nissan 240SX w/KA24DE - New project 1984 Mazda RX-7 GSL-SE 13B

01-21-2012, 10:34 AM	#4
Pro ViZIon Zilvia Junkie Join Date: Dec 2008 Location: Las Vegas, NV Age: 34 Posts: 415 Trader Rating: (0) Feedback Score: 0 reviews	Check your tps and see if its set correctly. Also make sure your getting enough fuel. Check all injectors and fuel pump. __________________ 1990 Nissan 240SX w/KA24DE - New project 1984 Mazda RX-7 GSL-SE 13B

01-21-2012, 10:23 AM	#3
AnthonysSilvia Zilvia Member Join Date: Apr 2011 Location: Los Angeles Age: 33 Posts: 272 Trader Rating: (1) Feedback Score: 1 reviews	my car will start but i have to keep on tapping the throttle to keep it on, all my grounds and wiring are fine.

02-27-2012, 12:51 AM	#5
ardeine Join Date: Feb 2012 Location: santa clara, ca Age: 33 Posts: 22 Trader Rating: (0) Feedback Score: 0 reviews	how do you check if the tps is set wrong?? i have the same problem but seems like it might be timing because the engine shakes rough when i let go of the gas. could it be timing? seems like it is due to not bolting on the cams right or maybe something called the idle gear i have heard. any help is appreciated

02-28-2012, 01:02 PM	#6
mr.man.performance Leaky Injector Join Date: Jan 2011 Location: O-Side, CA Age: 39 Posts: 60 Trader Rating: (0) Feedback Score: 0 reviews	When you start it, does it sound like a loping v8? You might be a tooth off on timing. Also, check your vacuum lines.

02-28-2012, 02:27 PM	#7
Dorifto Machine Zilvia Addict Join Date: May 2011 Location: Orlando Fl. Posts: 698 Trader Rating: (17) Feedback Score: 17 reviews	Check for Vacuum Leaks as well.