NJ 1995 S14 for sale - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

koukidriver · 04-09-2012, 08:23 AM

This has been my pride and joy for years always garaged kept and driven only in the summer months I have spent well over 15k into this car. I rarely get to enjoy it and it time to let her go to a new home.

Wiseco coated, forged pistons (9:1)
Eagle forged H-beam rods
block tanked, cylinders bored 1.0 mm over (90mm bore), fully component balanced
NEW cylinder head w/Wiseco MLS headgasket
PDM Racing stage 2 Tri-flow cams, 272/278 advertised duration
All Supertech valvetrain, SS nitrated, 1mm oversized valves, dual SS springs, Ti retainers and seats
Mild porting and de-shrouding done to the head with 3 angle valve job
Toga high volume oil pump, and new lower front cover, toga high performance bearings
740cc DW injectors
Walbro 255lph fuel pump
Fuel Pressure Regualtor with a in-line gauge
Z32 Maf with adapter plate
Apexi air filer
JW Ecu
ISIS V2 Tubular Exhaust Turbo Manifold
Garret Gt3071r (A/R .50) (.86) exhaust Internally Gated (14psi)
Oil feed and return SS lines with oil restrictor
Coolant feed and return (AN)
CX intercooler with HKS SSbov
Koyo Aluminum Radiator
Altima fans and DIF fan controller
Nismo thermostat
Silcone coolant hoses
JGS motor and trans mounts
Excessive lower motor mount brackets
MR. Gasket copper exhaust gasket
Oil,Coolant and Boost Gauges
Megan 3-inch downpipe
Catco 3-inch Cat
Apexi Megaphone Exhaust
Fully built Auto trans by IPT
Rear Spc UCA
Front Tein tension rods
J30 Diff
Also the car has AC

Parts not installed:

Brembo Evo 8 calipers with adapter plates
Megan racing lower control arms for the rear

The bad:
The only issue with the car is a intake manifold leak due to using a stock intake manifold gasket a new thermal intake manifold gasket will be included. Its nothing major car runs great just need to rev it a bit to hold steady idle due to the small leak.

Asking 8,500 Cash no trades.

rvo7632 · 04-12-2012, 12:12 AM

whats the lowest u would take? would u take 64, not trying to low ball ya its just all i got

koukidriver · 04-12-2012, 07:22 AM

Price reduction $ 7,500

rb27dets14 · 04-12-2012, 07:31 AM

Trade for a 00 camera with ls1/t56

JRG1424 · 04-12-2012, 09:35 AM

Will you take $5500 cash?

koukidriver · 04-12-2012, 03:08 PM

Quote:

Originally Posted by rb27dets14

Trade for a 00 camera with ls1/t56

Not looking for trades,sorry.

koukidriver · 04-17-2012, 11:51 AM

Sale Pending

koukidriver · 04-18-2012, 02:44 PM

Okay so the buyer flaked, told me he couldn't come up with the cash.

My final price before I decide to keep it for good : $7,000. FIRM

koukidriver · 04-23-2012, 09:29 AM

Mods please close thread .

04-09-2012, 08:23 AM	#1
koukidriver Zilvia Member Join Date: Apr 2008 Location: Jerz Posts: 201 Trader Rating: (3) Feedback Score: 3 reviews	1995 S14 KA-T for sale Fully built This has been my pride and joy for years always garaged kept and driven only in the summer months I have spent well over 15k into this car. I rarely get to enjoy it and it time to let her go to a new home. Wiseco coated, forged pistons (9:1) Eagle forged H-beam rods block tanked, cylinders bored 1.0 mm over (90mm bore), fully component balanced NEW cylinder head w/Wiseco MLS headgasket PDM Racing stage 2 Tri-flow cams, 272/278 advertised duration All Supertech valvetrain, SS nitrated, 1mm oversized valves, dual SS springs, Ti retainers and seats Mild porting and de-shrouding done to the head with 3 angle valve job Toga high volume oil pump, and new lower front cover, toga high performance bearings 740cc DW injectors Walbro 255lph fuel pump Fuel Pressure Regualtor with a in-line gauge Z32 Maf with adapter plate Apexi air filer JW Ecu ISIS V2 Tubular Exhaust Turbo Manifold Garret Gt3071r (A/R .50) (.86) exhaust Internally Gated (14psi) Oil feed and return SS lines with oil restrictor Coolant feed and return (AN) CX intercooler with HKS SSbov Koyo Aluminum Radiator Altima fans and DIF fan controller Nismo thermostat Silcone coolant hoses JGS motor and trans mounts Excessive lower motor mount brackets MR. Gasket copper exhaust gasket Oil,Coolant and Boost Gauges Megan 3-inch downpipe Catco 3-inch Cat Apexi Megaphone Exhaust Fully built Auto trans by IPT Rear Spc UCA Front Tein tension rods J30 Diff Also the car has AC Parts not installed: Brembo Evo 8 calipers with adapter plates Megan racing lower control arms for the rear The bad: The only issue with the car is a intake manifold leak due to using a stock intake manifold gasket a new thermal intake manifold gasket will be included. Its nothing major car runs great just need to rev it a bit to hold steady idle due to the small leak. Asking 8,500 Cash no trades. __________________ http://zilvia.net/f/chat/354550-nothing-easy-build.html Last edited by koukidriver; 04-12-2012 at 07:24 AM..

04-12-2012, 07:22 AM	#3
koukidriver Zilvia Member Join Date: Apr 2008 Location: Jerz Posts: 201 Trader Rating: (3) Feedback Score: 3 reviews	Price reduction $ 7,500 __________________ http://zilvia.net/f/chat/354550-nothing-easy-build.html

04-17-2012, 11:51 AM	#7
koukidriver Zilvia Member Join Date: Apr 2008 Location: Jerz Posts: 201 Trader Rating: (3) Feedback Score: 3 reviews	Sale Pending __________________ http://zilvia.net/f/chat/354550-nothing-easy-build.html

04-18-2012, 02:44 PM	#8
koukidriver Zilvia Member Join Date: Apr 2008 Location: Jerz Posts: 201 Trader Rating: (3) Feedback Score: 3 reviews	Okay so the buyer flaked, told me he couldn't come up with the cash. My final price before I decide to keep it for good : $7,000. FIRM __________________ http://zilvia.net/f/chat/354550-nothing-easy-build.html

04-23-2012, 09:29 AM	#9
koukidriver Zilvia Member Join Date: Apr 2008 Location: Jerz Posts: 201 Trader Rating: (3) Feedback Score: 3 reviews	Mods please close thread . __________________ http://zilvia.net/f/chat/354550-nothing-easy-build.html

04-12-2012, 12:12 AM	#2
rvo7632 Join Date: Apr 2012 Location: wichita ks Posts: 20 Trader Rating: (0) Feedback Score: 0 reviews	whats the lowest u would take? would u take 64, not trying to low ball ya its just all i got

04-12-2012, 07:31 AM	#4
rb27dets14 Zilvia FREAK! Join Date: Jan 2010 Location: ri Age: 39 Posts: 1,301 Trader Rating: (2) Feedback Score: 2 reviews	Trade for a 00 camera with ls1/t56

04-12-2012, 09:35 AM	#5
JRG1424 Join Date: Apr 2012 Location: Delaware Age: 33 Posts: 1 Trader Rating: (0) Feedback Score: 0 reviews	Will you take $5500 cash?