collapse lifters - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

johnosu1 · 04-16-2012, 08:33 PM

I have a collapsed lifters but I'm just going to replace them all. been lookin at stock lifters but haveing a hard time finding hyd lifters that aren't as much as tomie solid lifters. should I just go solid? also will Sr20de lifters work?? thanks

riptor · 04-17-2012, 01:53 AM

im here with you bro...i have one on the intake side of cylinder number 4.

johnosu1 · 04-17-2012, 09:11 AM

Quote:

Originally Posted by riptor

im here with you bro...i have one on the intake side of cylinder number 4.

how did u figure out for sure what cylinder it was. and what are u doing for lifters then?

johnosu1 · 04-18-2012, 02:57 AM

anybody know where I can get a set????

riptor · 04-18-2012, 03:57 AM

heres what you do....my buddy showed me this one....its stupid simple and fuckin genious! take a wire coat hanger...cut the tip off of it and starightin it out,basically use pliers and make it into a stick. then using those same pliers take a screw driver, preferibly one a rounded end..not a flat one, and rap your new stick of wire around the handle of the screwdriver twice and do a twist tie style deal with the end...now you have a stethiscope(sp)...put the end of the screw driver into your ear..and make sure the tip of your wire "stick" is in contact with a flat surface, horizontal or vertical. you will beable to hear what is going on behind the scenes...thats how i found out what side it was.

04-16-2012, 08:33 PM	#1
johnosu1 Join Date: Jul 2003 Location: Ohio Age: 41 Posts: 45 Trader Rating: (0) Feedback Score: 0 reviews	collapse lifters I have a collapsed lifters but I'm just going to replace them all. been lookin at stock lifters but haveing a hard time finding hyd lifters that aren't as much as tomie solid lifters. should I just go solid? also will Sr20de lifters work?? thanks

04-17-2012, 01:53 AM	#2
riptor Zilvia Member Join Date: Oct 2006 Location: va beach Age: 41 Posts: 241 Trader Rating: (2) Feedback Score: 2 reviews	im here with you bro...i have one on the intake side of cylinder number 4.

04-18-2012, 02:57 AM	#4
johnosu1 Join Date: Jul 2003 Location: Ohio Age: 41 Posts: 45 Trader Rating: (0) Feedback Score: 0 reviews	anybody know where I can get a set????

04-18-2012, 03:57 AM	#5
riptor Zilvia Member Join Date: Oct 2006 Location: va beach Age: 41 Posts: 241 Trader Rating: (2) Feedback Score: 2 reviews	heres what you do....my buddy showed me this one....its stupid simple and fuckin genious! take a wire coat hanger...cut the tip off of it and starightin it out,basically use pliers and make it into a stick. then using those same pliers take a screw driver, preferibly one a rounded end..not a flat one, and rap your new stick of wire around the handle of the screwdriver twice and do a twist tie style deal with the end...now you have a stethiscope(sp)...put the end of the screw driver into your ear..and make sure the tip of your wire "stick" is in contact with a flat surface, horizontal or vertical. you will beable to hear what is going on behind the scenes...thats how i found out what side it was.