TN TW S14 Built KA24DET - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

240s4life · 04-14-2012, 09:13 AM

Name: Matt hopkins
Item: S14 built KA24DET
Location: Nashville TN
Description: Toying with the idea of going VH instead of selling my car, so that means sell my motor first.
Throw out some offers, worst I can say is no. Motor would need to be picked up or I could meet you depending on how far away. no shipping.
Tune on the ECU is currently set up for e85 but it's a programmable ECU, change it back to pump gas and it'll still make pretty close to the same power.
On 20psi running e85 it made 336whp and ~360ft/lbs trq

PM or call/text : 615-939-2975

Currenlty motor is sitting right at 1000 miles on the rebuild so it's still fresh as a fucking daisy. Ready to drop in and get rowdayyyyy.

Motor info:
s14 ka24de
Wiseco 9:1 pistons .020 over stock
Eagle rods
Cleavite 77 main and rod bearings
ARP rod, main, and head studs
New front cover (brand new oil pump)
Ported head with new 3 angle done during rebuild
ISIS 3871r Turbo
Ported intake manifold
Xcessive thermal intake gasket
Xcessive oil pan
ISIS sr lower pan with baffles (holds 6.5qts of oil)
248/232 cams
Titek 550cc injectors
11lb flywheel
Exedy stage 2 clutch with TN clutch 6 puck unsprung clutch disk

Block was honed, has been bored .020 over stock, crank journals line bored, and le block decked during rebuild.
Head has new valve guides and seals, 3 angle valve job, and is ported

Other stuffs that will go with the motor
s13 Nistune ECU with rywire jumper harness (much easier to tune than s14 nistune ECU's)
Z32 Maf
HKS SSQV
Isis bottom mount t2 manifold that's been wrapped with fiberglass wrap.
Isis turbo outlet and 3'' downpipe to 3'' Isis blast pipes.
Isis electronic boost controller
s13 distributor with MSD blaster coil
Walbro 392lph external helper pump
Isis FMIC and all piping

If the price is right i'll throw in the oil pressure, boost, and water temp gauges.

2011-10-26 22.32.23 by mattski_s14, on Flickr

DSC_0203 by mattski_s14, on Flickr

DSC_0024 by mattski_s14, on Flickr

c_mancuyas8 · 04-16-2012, 05:15 PM

pmed about engine sir

aaronka · 04-16-2012, 06:37 PM

willing to partout s13 ecu with jumper?

240s4life · 04-16-2012, 11:28 PM

no partout, trade pending right now

04-14-2012, 09:13 AM	#1
240s4life Leaky Injector Join Date: Dec 2006 Location: Chattanooga TN Age: 34 Posts: 114 Trader Rating: (1) Feedback Score: 1 reviews	TW S14 Built KA24DET Name: Matt hopkins Item: S14 built KA24DET Location: Nashville TN Description: Toying with the idea of going VH instead of selling my car, so that means sell my motor first. Throw out some offers, worst I can say is no. Motor would need to be picked up or I could meet you depending on how far away. no shipping. Tune on the ECU is currently set up for e85 but it's a programmable ECU, change it back to pump gas and it'll still make pretty close to the same power. On 20psi running e85 it made 336whp and ~360ft/lbs trq PM or call/text : 615-939-2975 Currenlty motor is sitting right at 1000 miles on the rebuild so it's still fresh as a fucking daisy. Ready to drop in and get rowdayyyyy. Motor info: s14 ka24de Wiseco 9:1 pistons .020 over stock Eagle rods Cleavite 77 main and rod bearings ARP rod, main, and head studs New front cover (brand new oil pump) Ported head with new 3 angle done during rebuild ISIS 3871r Turbo Ported intake manifold Xcessive thermal intake gasket Xcessive oil pan ISIS sr lower pan with baffles (holds 6.5qts of oil) 248/232 cams Titek 550cc injectors 11lb flywheel Exedy stage 2 clutch with TN clutch 6 puck unsprung clutch disk Block was honed, has been bored .020 over stock, crank journals line bored, and le block decked during rebuild. Head has new valve guides and seals, 3 angle valve job, and is ported Other stuffs that will go with the motor s13 Nistune ECU with rywire jumper harness (much easier to tune than s14 nistune ECU's) Z32 Maf HKS SSQV Isis bottom mount t2 manifold that's been wrapped with fiberglass wrap. Isis turbo outlet and 3'' downpipe to 3'' Isis blast pipes. Isis electronic boost controller s13 distributor with MSD blaster coil Walbro 392lph external helper pump Isis FMIC and all piping If the price is right i'll throw in the oil pressure, boost, and water temp gauges. 2011-10-26 22.32.23 by mattski_s14, on Flickr DSC_0203 by mattski_s14, on Flickr DSC_0024 by mattski_s14, on Flickr

04-16-2012, 05:15 PM	#2
c_mancuyas8 Zilvia Junkie Join Date: Feb 2011 Location: greenwood s.c. Age: 41 Posts: 461 Trader Rating: (12) Feedback Score: 12 reviews	pmed about engine sir __________________

04-16-2012, 06:37 PM	#3
aaronka Join Date: Mar 2011 Location: laredo tx. Age: 37 Posts: 43 Trader Rating: (2) Feedback Score: 2 reviews	willing to partout s13 ecu with jumper?

04-16-2012, 11:28 PM	#4
240s4life Leaky Injector Join Date: Dec 2006 Location: Chattanooga TN Age: 34 Posts: 114 Trader Rating: (1) Feedback Score: 1 reviews	no partout, trade pending right now