Helpppppppppppp no start - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

UNDECIDEDFBODY · 04-20-2012, 09:30 PM

Heeeeeeeellllllllllpppppppppp
I have a 89 5 speed se power windows,locks,mirrors,and back wiper
Motor,Trans and ecu with harness is out of a 90 5 speed base hatch

I just put my sohc 5speed in my 89 hatch, the car was a original 5speed. I hooked every wire up and now when I turn the key to start it the acc relay on drive side makes a click noise. At the same time the three relays on the passenger side fuse box clicks. Everything comes on light,interior,windows,wipers but no starting. I feels as if there is no signal going to ignition. I do not hear or feel fuel pump also

I used the 90 base harness with my se ecu

Any help will be greatly appreciated as I do not know much on this

Hashiriya415 · 04-20-2012, 10:08 PM

Why a car won't start - troubleshooting tips

Walperstyle · 04-21-2012, 02:24 AM

Clicking is battery is dead (usually) (not to mention you don't even hear the fuel pump prime)
However, if you just installed a 5 speed transmission into an automatic, you will have to realize that you will have to solder the neutral safety swtich (or whatever it is called) to be able to start the car.

240sxtechdvds.org has factory service manuals for free download. Dude also made a bunch of DVD's regarding DOHC cars if you ever were so inclined to swap for a DOHC engine.

ze12o · 04-21-2012, 07:23 AM

checked your fuses?

Walperstyle · 04-21-2012, 07:28 AM

Quote:

Originally Posted by ze12o

checked your fuses?

and relays

04-20-2012, 09:30 PM	#1
UNDECIDEDFBODY Leaky Injector Join Date: May 2011 Location: shirley ny Age: 56 Posts: 121 Trader Rating: (0) Feedback Score: 0 reviews	Helpppppppppppp no start Heeeeeeeellllllllllpppppppppp I have a 89 5 speed se power windows,locks,mirrors,and back wiper Motor,Trans and ecu with harness is out of a 90 5 speed base hatch I just put my sohc 5speed in my 89 hatch, the car was a original 5speed. I hooked every wire up and now when I turn the key to start it the acc relay on drive side makes a click noise. At the same time the three relays on the passenger side fuse box clicks. Everything comes on light,interior,windows,wipers but no starting. I feels as if there is no signal going to ignition. I do not hear or feel fuel pump also I used the 90 base harness with my se ecu Any help will be greatly appreciated as I do not know much on this __________________ 93 S13 HATCH ROLLER 90 S13 DAILY HOOPD 99 SILVERADO Z71 beater

04-21-2012, 02:24 AM	#3
Walperstyle Nissanaholic! Join Date: Nov 2004 Location: Alberta, Red Derp Age: 44 Posts: 1,729 Trader Rating: (0) Feedback Score: 0 reviews	Clicking is battery is dead (usually) (not to mention you don't even hear the fuel pump prime) However, if you just installed a 5 speed transmission into an automatic, you will have to realize that you will have to solder the neutral safety swtich (or whatever it is called) to be able to start the car. 240sxtechdvds.org has factory service manuals for free download. Dude also made a bunch of DVD's regarding DOHC cars if you ever were so inclined to swap for a DOHC engine. __________________ KA-T ORG-Function over Flush

04-21-2012, 07:23 AM	#4
ze12o Zilvia FREAK! Join Date: Jan 2008 Location: NY Age: 34 Posts: 1,005 Trader Rating: (26) Feedback Score: 26 reviews	checked your fuses? __________________ ಠ_ಠ

04-20-2012, 10:08 PM	#2
Hashiriya415 Zilvia FREAK! Join Date: Jun 2007 Location: San Francisco Age: 37 Posts: 1,007 Trader Rating: (22) Feedback Score: 22 reviews	Why a car won't start - troubleshooting tips