S13 vs s14 knuckles??

[nemesisdrift]

Simple question, im swapping parts off my track car to my back up car. I want to take the knuckles, hubs, and lower control arm off my S14 and bolt it onto my S13, I understand the control arm is a different length but what about the knuckles? are they pretty much the same?

[ze12o]

If I remember correctly to bolt the s14 knuckles on you need the 14 flca that's all. Correct me if I'm wrong

[nemesisdrift]

luckily i got that shit so we are go. im more so asking to make sure the bolt holes aren't different where the coils mount to.

[future]

If your going to swap all that your good.

To put it on a s13 you need the nuckles and lower control arms or s13 arms with s14 balljoints

[shalezzz]

The bolts that go through the spindle and strut mount are different between s13 and s14.
if you use the s14 ones you need to widen the 2 holes on your coilover mounts on each side. Or you can use your s13 strut bolts if you buy thesehttp://www.enjukuracing.com/products/Agency-Power-5-Lug-Shock-Mount-Spacers-Nissan-240SX.html

[ze12o]

Yup forgot about that I suggest you get the spacers I wouldn't want to fudge up your coils 5lugsleeves.com

[shalezzz]

^ I don't think he sells them any more I had to buy mine from enjuku