OH Huge Drift Car Part Out!!!

[flybye]

That's right...the tim has come to step away from the car. I just have no motivation to finish the car nor do I have the means to do so anymore. So I plan to sell off everything I have for this car and pick up another rwd toy to just tinker with. All prices are negotiable and I am not really looking for any trades asided from the stock parts that I need for the chassis to stay rolling.

First off is the chassis. Which is a 91' hatchback with a clean title and ZERO rust!!! I can include or remove any of the parts in this ad for an adjusted price. Or else it will be coming with mostly stock parts and what I have listed.

Things it has:
6 point cage w/ door bars (not the best welds)
Walbro 255lph fuel pump
Crack free dash and console
working e-brake with drift button
Forced fab modded knuckles (55* or so of angle)
AIT M4 Aggressive Aero (full kit) cracks here and there, but mostly partially repaired
1 spare AIT M4 rear bumper (only mounted and moved around the garage)
Engine bay and inteior have been recently sprayed black with floor truck bed lined
front fender wells, frame rails and trans tunnel undercoated

Things it needs:
Drivetrain
Body harness (I cut the old one out, but still have it)
Tie rods
Fenders
Wheels
Seat
Steering wheel
Windshield
whatever else you want to put on it

$1200 OBO




And off the the parts!

-Kaaz 2 way differential $700

-Fortune Auto coilovers (brand new, just mounted) drift valving with 9k/7k rates PENDING

-Megan rear lower traction rods SOLD

-Megan RUCA's SOLD

-Megan rear toe arms SOLD

-Megan front tension rodss SOLD

-Tein inner and outer tie rods(one boot ripped) w/ PBM spacers SOLD

-Solid steering shaft bushing(new) SOLD

-Energy prothane(red/new) steering rack bushings $15

-Ebay 5 lug with 60mm extended studs $220

-NRG steering wheel hub.....SOLD

-HKS Intake filter kit (no foam included) $30

-Progress rear sway/anti roll bar (3 ajustments) $120

-Custom stainless 3 inch cat back exhaust with dual blast pipes (one hanger needs welded) $250

-Autometer Pro-comp Ultra-lite(silver) 2 5/8" 0-100 Fuel psi gauge w/ SS line $60

-Autometer Autogage Tachometer 8k rpm(black) $30

-Autometer Pro-comp Ultra-lite(silver) 0-100 Oil psi gauge $30

-Koyo S13 SR20DET aluminum radiator (dented bottom/still flows) SOLD

I think that is everything minus all of the small block Ford V8 swap parts that I have. I also have pics of pretty much everything and might post them up later or you can pm me. I just figured the thread was already long enough. All prices are negotiable and I am ready to sell it all!

Thank you,
Sean

[Future_gohan]

VH45DE Xcessive Manufacturing Transmission adapter - 350.00 shipped
Xcessive Manufacturing Shifter adapter plate 100.00
300zx Exhaust manifold back exhaust 150.00 VH45de Direct fit
300zx calipers full set w/ lines 300.00
300zx calipers no lines 250.00
300zx 30mm 350z brembo rotor kit w/ caliper adapter 100.00


I need rb25 parts top mount manifold, turbo, freddy intake, intercoolers, starter, flywheel, pistons, headgasket etc! LMK

412 944 6017

[JdmDrift4Food]

Pm me pics of radiator and dent. Thanks

[flybye]

Wtf Michael?lol

[flybye]

First bump and price drops on a few things!

[WhiteNgold]

will u part with front fenders? if so, how much shipped to 34237 florida? i wanna buy the whole shell but itd be too expensive to go up and get it lol

[flybye]

Originally Posted by WhiteNgold

will u part with front fenders? if so, how much shipped to 34237 florida? i wanna buy the whole shell but itd be too expensive to go up and get it lol

I have a couple locals interested in all of the aero. So if one of them bails I will let you know. Too bad Florida is just a couple hours away

[OkiDori17]

if you can hold onto the tie rods (inner and outer w/ spacers) i can get them off your hands next week. I just have to wait until payday to do so.

[trak-shuhn]

condition of the nrg hub?

[flybye]

Originally Posted by OkiDori17

if you can hold onto the tie rods (inner and outer w/ spacers) i can get them off your hands next week. I just have to wait until payday to do so.

Somebody else sent me a pm just before your post. If he bails you are next on the list!

Originally Posted by trak-shuhn

condition of the nrg hub?

Minty ....pm sent with a pic.

[flybye]

Here is a pic of the coils and diff. As you can see the coils were only mounted, diff is in great shape too!





Hit me up for pics of anything!

[projectslider]

price shipped to zip 00926. for the agressive front bumper?

[flybye]

Originally Posted by projectslider

price shipped to zip 00926. for the agressive front bumper?

If i sell the kit I will not separate any of it. $350 for everything including a new extra rear bumper.

[nismonowotnik]

hey call me 740 229 8919 i need parts now

[nismonowotnik]

i want the side skirts asap please pm me or call me

[s13&ae86love]

were are you located?

[flybye]

Columbus, Ohio area

[burgessn]

pm me best price on diff shipped!!

[flybye]

Originally Posted by burgessn

pm me best price on diff shipped!!

Pm sent!


Buy my stuff so I can buy this...

[trak-shuhn]

Bump awesome guy to work with!

[status]

PM sent about radiator, no reply. Please LMK shipped to 98034

[Teddy]

Still awaiting a reply to my personal message.

[flybye]

Originally Posted by status

PM sent about radiator, no reply. Please LMK shipped to 98034

A close friend of mine came and snagged it unexpectedly. He was in a pinch and needed it badly.

Originally Posted by Teddy

Still awaiting a reply to my personal message.

Trying to get back to everyone now. Its been a busy weekend and I officially have everything off the car.


Thanks again trak-shuhn!

[sjo503]

I'm in dire need of a fuel sending unit and a fuel pump...are either of those up for grabs?

[flybye]

Originally Posted by sjo503

I'm in dire need of a fuel sending unit and a fuel pump...are either of those up for grabs?

I honestly don't feel like messing with that. Just buy a new one...drop in Walbro's are cheap lol

[sjo503]

Originally Posted by flybye

I honestly don't feel like messing with that. Just buy a new one...drop in Walbro's are cheap lol

The pump I don't mind buying, it's the sending unit I can't find anywhere. No local junk yards have one and I can't seem to find one online either. And mine is fubar!

[flybye]

Originally Posted by sjo503

The pump I don't mind buying, it's the sending unit I can't find anywhere. No local junk yards have one and I can't seem to find one online either. And mine is fubar!

I understand man. Unfortunately I can't ditch mine. One being I don't want to mess with it and the other being I don't want the buyer if the chassis to be in the same position as you.

[sjo503]

Originally Posted by flybye

I understand man. Unfortunately I can't ditch mine. One being I don't want to mess with it and the other being I don't want the buyer if the chassis to be in the same position as you.

Understood. Thanks anyhow!

[flybye]

Originally Posted by sjo503

Understood. Thanks anyhow!

No problem. Good luck on your search!

[ze12o]

100 for the sway? i'll send you a label to ship ups.