CA FS: 19x9.5/19x11.0 POLISHED/CHROME Work Rezax II +13 F/+0 R $3000 OBO

[SofaKingFast]

Hey Guys,

I REALLY, REALLY, REALLY hate to do this, but I have to sell my favorite mesh wheels of all time to fund my motor rebuild. The wheels are currently at Platinum VIP in Baldwin Park, as they're waiting for a new inner barrel for the passenger front wheel. Specs for the wheels are below:







Some pics when I test fit them on my S14. My rear fenders are only rolled, so a little camber and a stretched tire and you're good to go.



make: WORK
model: Rezax II
size (front): 19x9.5 +13mm
size (rear): 19x11.0 +0mm
bolt pattern: 5x115 (Yes strange, but they fit 5x114.3 just fine as I ran these on both my S14 and GS300)
tires: Only on 3 but are camber worn and should be replaced soon
condition: Faces and lips are fully polished. Some small curb rashes and surface scratches from rubbing my fender, but nothing out of the ordinary. No bends/cracks. As stated above, the passenger inner barrel will be replaced so that will be brand new (previous one was cracked after a tire blowout).
center caps: I have 3/4 center caps. Someone tried to steal one the other but only made off with half.
asking price: $3000 OBO PRICE DROP SEE LAST POST
trades?: NO

Let me know if you guys have any questions, and bump my thread if you looked thanks!

Ryan

[SofaKingFast]

Shoot me offers guys, need these gone!

[LoSt]

Super nice. Too rich for me currently. Maybe in a year? Lol glws man

[SofaKingFast]

Haha I hope I don't have these in a year, but you never know. I kind of don't want to get rid of them (hopefully someone buys my VIP Modulars first) so maybe I will lol.

[Layzorbeemz]

GLWS.

So much want! friggen 1JZ swap... I'd buy these if I had not bought my 1JZ.

[SofaKingFast]

Originally Posted by Layzorbeemz

GLWS.

So much want! friggen 1JZ swap... I'd buy these if I had not bought my 1JZ.

Trade me the 1jz haha

Sent from my Sony Tablet S using Tapatalk

[Layzorbeemz]

can't do that mang already bought a gt3076r for it and stuff! and my cressida's 5MGE is a POS.

[nokcy21]

whats the lip size? trade for wheels?

[digitalightkenz]

Hum... how crazy would I need to roll my fenders and camber to make it fit on a 03 is300?

Ken

[SofaKingFast]

Originally Posted by nokcy21

whats the lip size? trade for wheels?

Lip size (front): 3.5"
Lip size (rear): 4.5"

What wheels do you have? Shoot me a PM.

Originally Posted by digitalightkenz

Hum... how crazy would I need to roll my fenders and camber to make it fit on a 03 is300?

Ken

Ken, I'm not familiar with the wheel arches for an IS300, but if its anything like an IS250 you'll need some demon camber to get these to fit. Sorry I can't be of much help here.

Ryan

[SofaKingFast]

Need the cash guys, taking offers!

[SofaKingFast]

Looking to get back into wheels that aren't as aggressive, so shoot me trade offers too. Bump it up!

Ryan

[IIxOATxII]

just to throw out there if you are willing to sell face only let me know

[KOUKIboy]

Daaaamn beautiful wheels!!!! and sexy GS!!! GLWS...

[Chuvy]

I'm about to get a GS. Would I need any spacers, roll or pull the fenders to make these fit? also, what brakes are those?

Thanks

[SofaKingFast]

Originally Posted by Chuvy

I'm about to get a GS. Would I need any spacers, roll or pull the fenders to make these fit? also, what brakes are those?

Thanks

You'll definitely need a roll and pull for the rear. The fronts you can get away with just a roll, but both front and back you'll need to camber. The brakes I have are LS400's.

Ryan

[SofaKingFast]

UPDATE: I'm still waiting on the inner barrel to come in from WheelFlip to replace the cracked inner rim. Honestly you could probably just file/weld because the cracks aren't big (see pictures below). With that said, I'm now offering two purchase options:

Crack#1 w/ quarter



Crack #2


Wheels as is without BNIB inner barrel: $2500 FIRM
Wheels with inner barrel: $2600 FIRM (that's $100 off! Inner barrel cost $200)

Either way I'm including one good 235/35/19 for the front and one good 265/35/19 for the rear.

Hurry before I change my mind, if I can come up with funds for the build I'm keeping these. Hit me up!

Ryan
626.757.32onesix

[lsvtec]

to help you with the sale to whoever buying these wheels, i have 1 original work rezax inner barrel for $50 and i am also in 626 area.

[rb25jun]

if all goes well i can pick up on weds night. hit me up i sent you a pm with my number

[SofaKingFast]

Weekend bump! I may entertain cheap wheels + cash, but they need to be 18" or 19" in nothing higher than a +20 offset.

[SofaKingFast]

Still for sale/trade! For trades I'm looking for 18 or 19's in the +10 to +20 range. Ideally I'm looking for your wheels + at least $1000 for yours so let me know what you've got!

[quiboparce]

These are tempting!

[SofaKingFast]

Update 6/26: Brand new Inner barrel finally came in, wheels are now complete with zero cracks. Asking $2600 firm!

Sent from my DROID X2 using Tapatalk 2

[Bi_Wizzie]

I'm pretty interested!!

[1SlowSE-R]

For a set of freshly powder coated work xd9s in high gloss white. 18x10+38 and custom center caps. Let me know if your interested


Sent from my iPhone using Tapatalk

[SofaKingFast]

Wizzie: PM'ed you.

1SlowSE-R: Sorry man offsets are too high and you're in NY so trading would be difficult. Thanks for the offer though.

Still available!

[ChrisNc]

fuckkkk..i wish i had money now.

[slammedG]

How much shipped to 29365?

[SofaKingFast]

Originally Posted by slammedG

How much shipped to 29365?

$2900 shipped via ups ground, lmk.

Sent from my DROID X2 using Tapatalk 2

[slammedG]

Thanks, PM sent