help with my transmision issues

[letsallgosideways]

ok so a long all nigter has left me stumped im converting my s13 to a manual and have the tranny in but its about an inch away from mounting the rod is in the driveshaft just not all the way in so please help

also does the auto pilot bearing converter stick out of the crankshaft at all or is that goldish lip supposed to be there thanks

[KiLLeR2001]

Dear god I hope English isn't your primary language. Trying to decipher your message, I believe you may need to make sure you installed a manual pilot bushing, you cannot use the auto pilot bushing. Most likely the auto one is still wedged inside your crank.

[Ryokai Fuji]

You may also need to look at the bolts auto tranny bolts are shorther than normal 5 speed u should be able to see it says

MT on the top side of the bolt.

[letsallgosideways]

haha it is, i was dead tired and my keyboard is fucked up i just re read my post and oh god i sounded stupid, i swear im not that stupid... and yeah i believe i took the the auto pilot bushing out i broke it out but im not certain i did put a maual one in but does the auto one stick out of crankshaft at all? or is that lip supposed to be there?

[NoPistons!]

It's in the fsm.

Being a dick because 18, 37 posts and yours is organized like mine after a case of beer and somehow making my way to zilvia..... Download the fsm.

[letsallgosideways]

alright idc about the dick part but yeah im 18 and 37 posts, you have to start somewhere but what is "fsm" haha im new obviousy

[lude4life13]

Originally Posted by letsallgosideways

alright idc about the dick part but yeah im 18 and 37 posts, you have to start somewhere but what is "fsm" haha im new obviousy

Factory Service Manual

[letsallgosideways]

ahhh ok cool thanks ill do that