help with oem fan and shroud - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

djfiniki · 09-25-2012, 06:21 PM

I have an S14 with an S14 SR and was wondering if the KA fan and clutch will fit an SR shroud.

F7Flare · 09-25-2012, 06:44 PM

I had a s13 with s13 sr20det and the ka fan could hit the shroud.
best way is to bolt up the fan and rotate it by hand and see if there's clearance.

mewantkouki · 09-25-2012, 07:46 PM

A ka fan will hit the front part of the head of an SR you have to notch the backside of the blades a little. As far as it fitting under a shroud, that would be a test fit type scenario. It should fit though as the sr fan is offset further forward than a ka fan.

chetos13 · 09-25-2012, 08:21 PM

I've seen s14 with clutch fan removed and installed a Altima dual fan to the radiator, looks great looks perfect

djfiniki · 09-25-2012, 08:28 PM

[QUOTE=mewantkouki;4920064]A ka fan will hit the front part of the head of an SR you have to notch the backside of the blades a little. As far as it fitting under a shroud, that would be a test fit type scenario. It should fit though as the sr fan is offset further forward than a ka

THANKS.

djfiniki · 09-25-2012, 08:33 PM

Quote:

Originally Posted by chetos13

I've seen s14 with clutch fan removed and installed a Altima dual fan to the radiator, looks great looks perfect

I have dual fans already, but thanks.

TheRealSy90 · 09-26-2012, 02:06 AM

The ka fan clutch wi not fit on Sr.

*wangan_cruiser* · 09-26-2012, 04:31 PM

Ka fan clutch and fan will work. Fan clutch will fit but the fan itself will hit the sr crank. Just need to shave each blade until u get the clearance to make it work. Its not hard. I currently run it on on my sr. No problems

KendallH · 09-26-2012, 04:39 PM

KA clutch fan will not work on SR. The blades will be too close to your belts and accessories. You must get an SR fan clutch. You can use the KA blade on the SR clutch, but you must use an SR clutch.

lilpiton · 09-26-2012, 04:50 PM

yea it not gonna work. you can just but the sr lades of like 40 bux OEM BNIB from nissanparts.cc. that's what im doing now..

09-25-2012, 06:21 PM	#1
djfiniki Leaky Injector Join Date: Dec 2003 Location: Orlando, FL now Pennsylvania Age: 48 Posts: 70 Trader Rating: (2) Feedback Score: 2 reviews	help with oem fan and shroud I have an S14 with an S14 SR and was wondering if the KA fan and clutch will fit an SR shroud. Last edited by djfiniki; 09-25-2012 at 06:28 PM.. Reason: Text error

09-25-2012, 08:21 PM	#4
chetos13 Zilvia Member Join Date: Mar 2008 Location: las vegas, nv Age: 39 Posts: 206 Trader Rating: (2) Feedback Score: 2 reviews	I've seen s14 with clutch fan removed and installed a Altima dual fan to the radiator, looks great looks perfect __________________ TEAM ELITE

09-25-2012, 08:28 PM	#5
djfiniki Leaky Injector Join Date: Dec 2003 Location: Orlando, FL now Pennsylvania Age: 48 Posts: 70 Trader Rating: (2) Feedback Score: 2 reviews	:) [QUOTE=mewantkouki;4920064]A ka fan will hit the front part of the head of an SR you have to notch the backside of the blades a little. As far as it fitting under a shroud, that would be a test fit type scenario. It should fit though as the sr fan is offset further forward than a ka THANKS.

09-26-2012, 04:39 PM	#9
KendallH Zilvia Addict Join Date: Jan 2011 Location: Clearwater, FL Level: Master Troll Age: 33 Posts: 871 Trader Rating: (3) Feedback Score: 3 reviews	KA clutch fan will not work on SR. The blades will be too close to your belts and accessories. You must get an SR fan clutch. You can use the KA blade on the SR clutch, but you must use an SR clutch. __________________

09-25-2012, 06:44 PM	#2
F7Flare Join Date: Feb 2008 Location: Seattle, WA Age: 35 Posts: 16 Trader Rating: (0) Feedback Score: 0 reviews	I had a s13 with s13 sr20det and the ka fan could hit the shroud. best way is to bolt up the fan and rotate it by hand and see if there's clearance.

09-25-2012, 07:46 PM	#3
mewantkouki Zilvia FREAK! Join Date: Nov 2007 Location: Orlando, Fl Age: 38 Posts: 1,250 Trader Rating: (36) Feedback Score: 36 reviews	A ka fan will hit the front part of the head of an SR you have to notch the backside of the blades a little. As far as it fitting under a shroud, that would be a test fit type scenario. It should fit though as the sr fan is offset further forward than a ka fan.

09-26-2012, 04:31 PM	#8
wangan_cruiser kouki man Join Date: Apr 2006 Location: downtown oakland,ca Age: 40 Posts: 3,539 Trader Rating: (36) Feedback Score: 36 reviews	Ka fan clutch and fan will work. Fan clutch will fit but the fan itself will hit the sr crank. Just need to shave each blade until u get the clearance to make it work. Its not hard. I currently run it on on my sr. No problems

09-26-2012, 04:50 PM	#10
lilpiton Zilvia Member Join Date: May 2008 Location: CHITOWN Age: 35 Posts: 155 Trader Rating: (7) Feedback Score: 7 reviews	yea it not gonna work. you can just but the sr lades of like 40 bux OEM BNIB from nissanparts.cc. that's what im doing now..