CAS Trigger Wheel Settings - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Matman03 · 12-13-2012, 04:03 PM

I am about to pull my hair out. I have searched Google for an hour for the stock CAS Trigger Wheel settings. What angle should it be at and how to set it or line it up. If I am just overlooking it please provide the link. I appreciate your help in advance. It is the stock sr20det CAS with the 360 tooth wheel. Also Running Stock ECU with SAFCII THANKS

codyace · 12-13-2012, 05:06 PM

I didn't know myself, decided to google a little:

CAS Trigger Wheel Fix for AEM EMS Released - Nissan RB Forum - HybridZ

Found that thread there, with some other information in regard to trigger wheel and resolution.

Hope it helps!

Kingtal0n · 12-13-2012, 07:01 PM

theres an updated trigger wheel for fixing an issue with timing on the AEM for sr20's you might want to look into

Matman03 · 12-14-2012, 07:00 AM

I have seen this aftermarket wheel that is being sold, do you just install it and then adjust your timing from there or do you have to use a different ecu or electronic tuning? I was basically looking for a starting point on the stock 360 tooth wheel since it got turned. There arent really any marks on it that say where you should adjust it to get stock timing. I have heard 45 degree all the way to 60 and 75 degree. Any thoughts?

Kingtal0n · 12-14-2012, 06:23 PM

this should help

http://forum.aempower.com/forum/inde...c,20345.0.html

Nissan CAS Calibration Fix

12-13-2012, 04:03 PM	#1
Matman03 Leaky Injector Join Date: Sep 2008 Location: ATL, GA Age: 40 Posts: 129 Trader Rating: (1) Feedback Score: 1 reviews	CAS Trigger Wheel Settings I am about to pull my hair out. I have searched Google for an hour for the stock CAS Trigger Wheel settings. What angle should it be at and how to set it or line it up. If I am just overlooking it please provide the link. I appreciate your help in advance. It is the stock sr20det CAS with the 360 tooth wheel. Also Running Stock ECU with SAFCII THANKS Last edited by Matman03; 12-14-2012 at 07:05 AM..

12-13-2012, 05:06 PM	#2
codyace Post Whore! Join Date: Dec 2004 Location: Poconos, PA Age: 40 Posts: 8,030 Trader Rating: (58) Feedback Score: 58 reviews	I didn't know myself, decided to google a little: CAS Trigger Wheel Fix for AEM EMS Released - Nissan RB Forum - HybridZ Found that thread there, with some other information in regard to trigger wheel and resolution. Hope it helps! __________________ *Want Air Conditioning in your SR20 Swapped car? Check out www.sr20acbrackets.com for more information! Quest Alternator Conversions for SR20!* Check my Group Buy! Tired of lousy internal gates? Go external wastegate with one of my manifolds, Check out my group buy

12-13-2012, 07:01 PM	#3
Kingtal0n Post Whore! Join Date: Jul 2005 Location: South Florida Age: 42 Posts: 4,829 Trader Rating: (17) Feedback Score: 17 reviews	theres an updated trigger wheel for fixing an issue with timing on the AEM for sr20's you might want to look into __________________ 5.3/4l80e/turbo 240sx playthrough: tinyurl.com/4l80er

12-14-2012, 07:00 AM	#4
Matman03 Leaky Injector Join Date: Sep 2008 Location: ATL, GA Age: 40 Posts: 129 Trader Rating: (1) Feedback Score: 1 reviews	Trigger Wheel I have seen this aftermarket wheel that is being sold, do you just install it and then adjust your timing from there or do you have to use a different ecu or electronic tuning? I was basically looking for a starting point on the stock 360 tooth wheel since it got turned. There arent really any marks on it that say where you should adjust it to get stock timing. I have heard 45 degree all the way to 60 and 75 degree. Any thoughts?

12-14-2012, 06:23 PM	#5
Kingtal0n Post Whore! Join Date: Jul 2005 Location: South Florida Age: 42 Posts: 4,829 Trader Rating: (17) Feedback Score: 17 reviews	this should help http://forum.aempower.com/forum/inde...c,20345.0.html Nissan CAS Calibration Fix __________________ 5.3/4l80e/turbo 240sx playthrough: tinyurl.com/4l80er