TN 95 S14 KA-T partout AEM Comp Turbo 1650cc

[z3nk1dr1ft]

Hey,


$4000 for the whole car.


I am parting out my 95 KA-T car.

140k on base model shell. 4 lug. green If you want the shell, $1500 Clean TN title.


** SOLD**
BOV, Wastegate, FPR, Head.

Still for sale:
16" Motegi wheels with new Khumo ASX tires $400
ACT 6 puck unsprung extreme (NIB) $275
Megan Short Throw Shifter $50
AEM EMS V1 2nd edition. for 95 $700
AEM 10 channel Injector driver $125
AEM UEGO wideband $125
Greddy boost gauge with electric sending unit $80
Autometer oil pressure gauge $20
top feed fuel rail $50
1650cc marren injectors $125
braided lines from rail to FPR $20
FMIC $150
All piping $75
3" DP $75
tubular manifold $150
comp t4 triple ball bearing turbo( no shaft play) $700
Build bottom end. 30psi compression on cylinder 3(wiseco pistons, eagle rods, acl bearings ARP everything, needs rings i think) $600
HKS turbo timer $50
manual boost controller $25
s14 distributor with AEM wheel $50



and whatever else is on the car..

car dynoed 520rwhp then put about 500 miles on it and lost compression on cylinder 3.. no scoring on the walls.

I will sell the whole car for $4000 obo as it sits with the head pulled off. Did run and drive before i pulled the head. I have receipts for almost everything.

[Vadim's13]

Would u part out rods bro?

[z3nk1dr1ft]

Originally Posted by Vadim's13

Would u part out rods bro?

I really don't have a good place to work on the car. I cant pull the motor becuase its parked on gravel/grass and my cherry picker wont do the trick there.

If I had a place to work on the car I would probably fix it and hit road atlanta some more.

So unfortunately... The bottom end is staying together for now.. Maybe with a little more interest in the bottom end I can get it pulled out somehow.

[slipnslide88]

Willing to sell that radio bezel and custom center section? Maybe the shell?

[z3nk1dr1ft]

Yes I will sell the radio bezel and shift knob area cover thing. and the shell is for sale as well. I will take $2500 obo for the shell i suppose. Clean title in hand. Comes with wheels and coilovers. Pretty much a solid roller. It has an aftermarket diff in it but I cant remember what kind right off. has subframe collars as well. Will also include the downpipe back exhuast.

[slipnslide88]

How much for radio bezel and the custom radio holder thing? What coilovers are on the shell and what kind of wheels are those?

[slipnslide88]

I just looked at the pics better I don't need the shifter thingy just the radio part

[d_nice]

good stuff here man

[fakieSI]

Is the tial v band or bolt style?

[z3nk1dr1ft]

Originally Posted by fakieSI

Is the tial v band or bolt style?

38MM bolt on style.


And a correction for the top. The AEM EMS is V2

[aznbikerboyz]

you got PM

[xs420240sx]

any way you could post a better picture of the fuel rail setup? may be interested in the rail.

[dato]

You have PM

[z3nk1dr1ft]

Originally Posted by xs420240sx

any way you could post a better picture of the fuel rail setup? may be interested in the rail.

Yeah.. Gimme a little bit. About to go to a wedding. I will post more pictures later tonight.

[z3nk1dr1ft]

more pics of requested items.

[z3nk1dr1ft]

Any takers on anything? Prices are OBO.

[byrd82]

Need that AEM! !!!!! Which one exactly is it? I know some of the later EMS 1, came with black case and were known as version 2. Then there is the EMS 2, which all come black.

[Slims]

sad to see this thing taken apart, looked like a fun car and some good numbers. what did ya crank the boost to?

[z3nk1dr1ft]

Originally Posted by byrd82

Need that AEM! !!!!! Which one exactly is it? I know some of the later EMS 1, came with black case and were known as version 2. Then there is the EMS 2, which all come black.

[nismoracingsx]

pm'd about a few parts.

[z3nk1dr1ft]

$5000 takes the whole car.

[z3nk1dr1ft]

Updated pricing. Everything sold as-is. OBO!

[Memberofthe600hpkaclub]

What size are those a.n. lines to the fpr look like -8 but I can't tell

[z3nk1dr1ft]

Originally Posted by Memberofthe600hpkaclub

What size are those a.n. lines to the fpr look like -8 but I can't tell

I am terrible with AN size lines.. I THINK its an -8 also. about 80% sure.

[Memberofthe600hpkaclub]

Does the gauge come with the reg? I'll buy both if you will do 110...also can you post a close up pic of it and the line? Or text it to me at 850 572 1401

[z3nk1dr1ft]

[DailyDrivenS14]

phone number to contact you, im in nashville

[Vi3tSR20DET]

Brand of the MBC and is it a ball/spring MBC? maybe PM me a pic? willing to ship? ..94591

[z3nk1dr1ft]

Originally Posted by Vi3tSR20DET

Brand of the MBC and is it a ball/spring MBC? maybe PM me a pic? willing to ship? ..94591

Its a no name ebay one. Not sure of the ball and spring deal. I'll throw a pic up tomorrow.

[z3nk1dr1ft]

NEW PRICE! $4500 takes it home.