Which engine can I use - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Mr. Spool · 03-29-2004, 05:35 PM

I ended up getting a rod knock today and figure its time to swap out the engine. I have a 96 se with an obd2 in it but I was wondering if I can just swap out the long block from any year ka24de. If so that would be great. Also what should I look for in an engine. Thanks for any help.

Sil Beer S13 · 03-29-2004, 11:51 PM

Well if you use an older KA you may get a check engine light since there will be some plugs form your harness that have no where to plug into. Being that the KA is OBD1 or NON OBD. Other than that you should get a 96-up engine and just drop it right in. Or go SR20. Meh your choice.

**mrmephistopheles** · 03-30-2004, 12:09 AM

as long as you swap shortblocks, you'll be fine.
if you swap longblocks, you should be ok (as long as you reuse same manifolds)

Mr. Spool · 03-30-2004, 06:40 AM

I live in michigan so emisions are not a problem, The previouse owner already unplugged all the emission items on the car so there not being replugged in. So you are saying that as long as I reuse my intake manifold I should be able to drop the engine right in? What should I look for in a good used engine?

03-29-2004, 05:35 PM	#1
Mr. Spool Zilvia Addict Join Date: Jan 2003 Location: East Side, Michigan Age: 44 Posts: 622 Trader Rating: (0) Feedback Score: 0 reviews	Which engine can I use I ended up getting a rod knock today and figure its time to swap out the engine. I have a 96 se with an obd2 in it but I was wondering if I can just swap out the long block from any year ka24de. If so that would be great. Also what should I look for in an engine. Thanks for any help. __________________ 96' SE Turbo'd Super 60, S-AFC, SMIC, 370cc Injectors, Open Air BOV, Warblo 255 pump, Stage 3 Clutch Kyb agx, Sportline Springs Full body kit, Bomex rear, Drift sides, r34 front gunmetal rims, yok tires

03-30-2004, 06:40 AM	#4
Mr. Spool Zilvia Addict Join Date: Jan 2003 Location: East Side, Michigan Age: 44 Posts: 622 Trader Rating: (0) Feedback Score: 0 reviews	I live in michigan so emisions are not a problem, The previouse owner already unplugged all the emission items on the car so there not being replugged in. So you are saying that as long as I reuse my intake manifold I should be able to drop the engine right in? What should I look for in a good used engine? __________________ 96' SE Turbo'd Super 60, S-AFC, SMIC, 370cc Injectors, Open Air BOV, Warblo 255 pump, Stage 3 Clutch Kyb agx, Sportline Springs Full body kit, Bomex rear, Drift sides, r34 front gunmetal rims, yok tires

03-29-2004, 11:51 PM	#2
Sil Beer S13 Zilvia FREAK! Join Date: Jul 2003 Location: Chino!...NOT CHINO HILLS! Age: 43 Posts: 1,117 Trader Rating: (0) Feedback Score: 0 reviews	Well if you use an older KA you may get a check engine light since there will be some plugs form your harness that have no where to plug into. Being that the KA is OBD1 or NON OBD. Other than that you should get a 96-up engine and just drop it right in. Or go SR20. Meh your choice.

03-30-2004, 12:09 AM	#3
mrmephistopheles Magnanimous Justice Distribution Service Join Date: Mar 2002 Location: BFE Age: 23 Posts: 14,372 Trader Rating: (9) Rides Gallery: mrmephistopheles Feedback Score: 9 reviews	as long as you swap shortblocks, you'll be fine. if you swap longblocks, you should be ok (as long as you reuse same manifolds)