Swirl Pot Setup Question - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

BoostinBen · 02-18-2013, 12:45 PM

I have a sr20 in my datsun 510 am curious if anyone has input on how i have setup my swirl-pot .. Instead of tapping the lower radiator hose / upper coolant outlet i have used the inlet / outlet from the block that was originally for the throttle body coolant lines. I dont run a heater core so I have the heater hoses looped. I am wondering if this is a good way to route the lines?

I will try my best to describe the setup with some pictures.

Swirl-Pot

Block water inlet / outlet

Radiator

02-18-2013, 12:45 PM	#1
BoostinBen Join Date: Apr 2009 Location: San Jose Ca Age: 43 Posts: 37 Trader Rating: (2) Feedback Score: 2 reviews	Swirl Pot Setup Question I have a sr20 in my datsun 510 am curious if anyone has input on how i have setup my swirl-pot .. Instead of tapping the lower radiator hose / upper coolant outlet i have used the inlet / outlet from the block that was originally for the throttle body coolant lines. I dont run a heater core so I have the heater hoses looped. I am wondering if this is a good way to route the lines? I will try my best to describe the setup with some pictures. Swirl-Pot Block water inlet / outlet Radiator