TN FS: KA24E SOHC Turbo Kit - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Ponda · 02-24-2013, 02:01 PM

Hate to do it but I'm bored with the car and ready to move on so I'm selling the kit and possibly the car later on.

Everything was bought brand new (minus the ecu and injectors) and has less than 5,000 miles. Turbo is in great shape with no shaft play and everything functions like it should. Here's what the kit consists of:

Godspeed t3/t4 .56AR turbo
Gladman Manifold
EMUSA Wastegate (7lb spring)
EMUSA Blow off valve
CXRacing FMIC w/ black intercooler piping
2.5'' downpipe
3'' SR eBay midpipe
AEM Wideband Sensor
Glowshift boost gauge
Braided oil / return lines
CA18DET 370cc Injectors
Tuned ECU for stock MAF and 370's - Jonathan at GroundPerformance did the work http://zilvia.net/f/members/groundperformance.html

The only things you'll need to get going is a fuel pump and a few couplers for the intercooler piping (I ripped two of them

).

Asking $1500 + shipping. Shoot me a PM and I'll send you my # if you're serious and we can talk.

02-24-2013, 02:01 PM	#1
Ponda Leaky Injector Join Date: May 2010 Location: East TN Posts: 55 Trader Rating: (1) Feedback Score: 1 reviews	FS: KA24E SOHC Turbo Kit Hate to do it but I'm bored with the car and ready to move on so I'm selling the kit and possibly the car later on. Everything was bought brand new (minus the ecu and injectors) and has less than 5,000 miles. Turbo is in great shape with no shaft play and everything functions like it should. Here's what the kit consists of: Godspeed t3/t4 .56AR turbo Gladman Manifold EMUSA Wastegate (7lb spring) EMUSA Blow off valve CXRacing FMIC w/ black intercooler piping 2.5'' downpipe 3'' SR eBay midpipe AEM Wideband Sensor Glowshift boost gauge Braided oil / return lines CA18DET 370cc Injectors Tuned ECU for stock MAF and 370's - Jonathan at GroundPerformance did the work http://zilvia.net/f/members/groundperformance.html The only things you'll need to get going is a fuel pump and a few couplers for the intercooler piping (I ripped two of them ). Asking $1500 + shipping. Shoot me a PM and I'll send you my # if you're serious and we can talk.