turn signals not working - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Kennybhybrid · 05-07-2013, 01:46 PM

Hi guys. I have a 95 240sx se. Its an auto to manual swapped car. My hazard lights are working just fine but the turn signals arent. I replaced the stalk, bulbs and fuse. I changed the relay but the problem still persist. Is there a seperate relay for the turn signals independent of the flasher? If so where is it located. Trying to get this car on the road asap. Please help if you can. Thanks in advance

SuperBlackS14 · 05-07-2013, 02:21 PM

It was an Auto-Manual Swap? I'd curl up with your factory service manual and check wiring diagrams. You may need to do some soldering... The Engine Bay Harness is different between auto/manual, base/se and abs/non, as is the transmission harness. These things can be a bit temperamental in cars our age. I'm currently looking for one to swap over because mine was done with like an S13 trans and harness instead of just removing the AT stuff...

Also search if you haven't yet.

Kennybhybrid · 05-07-2013, 06:03 PM

Dude ive searched endlessly for the past 2wks. Each forum says something different. Ive replaced everything the forums have said to replace. Everything in the car works fine except the signals n heat but idc for heat. Its a street strip car and i have a g37s daily. Ive read its a flasherjust for the signals but i have yet to find it. Anybody else have suggestions

SuperBlackS14 · 05-07-2013, 06:13 PM

If you've replaced everything else, it's probably wiring related...

JBPUSA · 05-07-2013, 07:23 PM

did they ever work? are you saying they stopped working after the 5 speed swap?
I have done 5 speed swaps and have never encountered this problem, did you buy the car this way?
seems like you replaced everything.
___________
Check out our website www.jbperformance.net

JBPUSA · 05-07-2013, 07:26 PM

also , Im aware you said the Hazard lights work, but try another hazard light button, as they are connected to each other in wiring.

___________
Check out our website www.jbperformance.net

Kennybhybrid · 05-08-2013, 09:17 AM

Yes the hazards work. My question is, is there a 2nd relay for the turn signals? I bought the car without them working, it was a rolling chassis and im fixing all the problems with the car. So does anybody know if s14s have a 2nd relay just for the turn signals. Its gonna be a track car but it will see the streets and i would like to use the turn signal switch and not stick my arm out the window.

Ilya · 05-08-2013, 09:46 AM

If your car is lowered, check the harness over the front wheel arches.

05-07-2013, 01:46 PM	#1
Kennybhybrid Leaky Injector Join Date: Aug 2011 Location: Ewing nj Age: 39 Posts: 69 Trader Rating: (0) Feedback Score: 0 reviews	turn signals not working Hi guys. I have a 95 240sx se. Its an auto to manual swapped car. My hazard lights are working just fine but the turn signals arent. I replaced the stalk, bulbs and fuse. I changed the relay but the problem still persist. Is there a seperate relay for the turn signals independent of the flasher? If so where is it located. Trying to get this car on the road asap. Please help if you can. Thanks in advance

05-07-2013, 02:21 PM	#2
SuperBlackS14 Zilvia Junkie Join Date: Sep 2011 Location: Albany, NY Age: 34 Posts: 381 Trader Rating: (4) Feedback Score: 4 reviews	It was an Auto-Manual Swap? I'd curl up with your factory service manual and check wiring diagrams. You may need to do some soldering... The Engine Bay Harness is different between auto/manual, base/se and abs/non, as is the transmission harness. These things can be a bit temperamental in cars our age. I'm currently looking for one to swap over because mine was done with like an S13 trans and harness instead of just removing the AT stuff... Also search if you haven't yet. __________________ "Power Is Nothing Without Control"

05-07-2013, 06:13 PM	#4
SuperBlackS14 Zilvia Junkie Join Date: Sep 2011 Location: Albany, NY Age: 34 Posts: 381 Trader Rating: (4) Feedback Score: 4 reviews	If you've replaced everything else, it's probably wiring related... __________________ "Power Is Nothing Without Control"

05-07-2013, 06:03 PM	#3
Kennybhybrid Leaky Injector Join Date: Aug 2011 Location: Ewing nj Age: 39 Posts: 69 Trader Rating: (0) Feedback Score: 0 reviews	Dude ive searched endlessly for the past 2wks. Each forum says something different. Ive replaced everything the forums have said to replace. Everything in the car works fine except the signals n heat but idc for heat. Its a street strip car and i have a g37s daily. Ive read its a flasherjust for the signals but i have yet to find it. Anybody else have suggestions

05-07-2013, 07:23 PM	#5
JBPUSA Zilvia Member Join Date: Mar 2012 Location: Irwindale/The City Of Industry Posts: 290 Trader Rating: (5) Feedback Score: 5 reviews	did they ever work? are you saying they stopped working after the 5 speed swap? I have done 5 speed swaps and have never encountered this problem, did you buy the car this way? seems like you replaced everything. ___________ Check out our website www.jbperformance.net

05-07-2013, 07:26 PM	#6
JBPUSA Zilvia Member Join Date: Mar 2012 Location: Irwindale/The City Of Industry Posts: 290 Trader Rating: (5) Feedback Score: 5 reviews	also , Im aware you said the Hazard lights work, but try another hazard light button, as they are connected to each other in wiring. ___________ Check out our website www.jbperformance.net

05-08-2013, 09:17 AM	#7
Kennybhybrid Leaky Injector Join Date: Aug 2011 Location: Ewing nj Age: 39 Posts: 69 Trader Rating: (0) Feedback Score: 0 reviews	Yes the hazards work. My question is, is there a 2nd relay for the turn signals? I bought the car without them working, it was a rolling chassis and im fixing all the problems with the car. So does anybody know if s14s have a 2nd relay just for the turn signals. Its gonna be a track car but it will see the streets and i would like to use the turn signal switch and not stick my arm out the window.

05-08-2013, 09:46 AM	#8
Ilya Zilvia Addict Join Date: Jan 2008 Location: San Diego Age: 35 Posts: 712 Trader Rating: (2) Feedback Score: 2 reviews	If your car is lowered, check the harness over the front wheel arches.