CA S13 DSS 1 piece aluminum driveshaft non abs - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

SoCalDrifter · 04-30-2013, 11:49 AM

sold
not my picture but its exactly what it looks like

SoCalDrifter · 05-02-2013, 01:57 PM

bump new price 350

aga · 05-02-2013, 02:54 PM

what's the difference with abs models? mine HAD abs, i've removed it...

tapdeznutz · 05-02-2013, 03:12 PM

if you still got this in acouple weeks i may pick it up. gl for now.

90pearlz · 05-02-2013, 08:29 PM

^^Search for more info but here is the jist. ABS diffs as well as 300zx, skyrine, etc..diffs are just a bit longer. The snout where the drivehsaft bolts to is like an inch or less longer. But to be honest with you all 1 piece driveshaft lengths are so close in length its hardly noticeable. I have an s13 coupe with a 1 piece that I got from a member who had it on a s14!! It fits perfect, no lie. I've even heard from a certain vendor that all the shafts are so similar that you can really get away with any of em. However the smart thing to do would be to purchase the correct shaft for your model. The only problem I could see is some damage to the tranny rear main but even that seems unlikely, and is an easy fix should it occur. If for seem reason the shaft purchased happen to be a little short then maybe just maybe you could damage the splines on either the shaft or the tranny output. Mine works flawlessly but maybe I just got lucky. Good luck OP

SoCalDrifter · 05-03-2013, 11:10 AM

Quote:

Originally Posted by aga

what's the difference with abs models? mine HAD abs, i've removed it...

i have no idea...maybe it should work then?

Quote:

Originally Posted by 90pearlz

^^Search for more info but here is the jist. ABS diffs as well as 300zx, skyrine, etc..diffs are just a bit longer. The snout where the drivehsaft bolts to is like an inch or less longer. But to be honest with you all 1 piece driveshaft lengths are so close in length its hardly noticeable. I have an s13 coupe with a 1 piece that I got from a member who had it on a s14!! It fits perfect, no lie. I've even heard from a certain vendor that all the shafts are so similar that you can really get away with any of em. However the smart thing to do would be to purchase the correct shaft for your model. The only problem I could see is some damage to the tranny rear main but even that seems unlikely, and is an easy fix should it occur. If for seem reason the shaft purchased happen to be a little short then maybe just maybe you could damage the splines on either the shaft or the tranny output. Mine works flawlessly but maybe I just got lucky. Good luck OP

^^this sounds like the right thing to do

Quote:

Originally Posted by tapdeznutz

if you still got this in acouple weeks i may pick it up. gl for now.

hopefully i dont haha but ok lmk when u wanna come pick it up

HTSDesign · 05-04-2013, 12:13 PM

this is a great deal

89SwapXE · 05-05-2013, 01:30 AM

where you located in ca??

Posted from Zilvia.net App for Android

SoCalDrifter · 05-05-2013, 07:43 PM

Quote:

Originally Posted by HTSDesign

this is a great deal

thanks alot of interst but no one seems serious....youll definitally notice a difference in your car with this over the stock one like night and day

Quote:

Originally Posted by 89SwapXE

where you located in ca??

Posted from Zilvia.net App for Android

SoCal thousand oaks area

SoCalDrifter · 05-07-2013, 12:16 PM

bummmp still have this need the cash lets get it out of here

Stayabovethelaw · 05-07-2013, 01:46 PM

u can use abs non abs ect..... i had an abs one piece i used it with my welded diff... j30 diff and zx diff all were fine

SoCalDrifter · 05-08-2013, 01:02 PM

Quote:

Originally Posted by Stayabovethelaw

u can use abs non abs ect..... i had an abs one piece i used it with my welded diff... j30 diff and zx diff all were fine

thanks for clearing that up

SoCalDrifter · 05-09-2013, 05:37 PM

anymore offers???

SoCalDrifter · 05-13-2013, 02:48 PM

last bump someone buy this before i have to make a new thread

petechason2 · 05-13-2013, 08:19 PM

Their set up isn't yours.

SoCalDrifter · 05-14-2013, 11:18 AM

Quote:

Originally Posted by sthgsthming

what's the difference with abs models?

im pretty sure theres a length difference between ABS and Non-ABS

04-30-2013, 11:49 AM	#1
SoCalDrifter Nissanaholic! Join Date: Jan 2010 Location: Thousand Oaks-818 Posts: 1,990 Trader Rating: (10) Feedback Score: 10 reviews	S13 DSS 1 piece aluminum driveshaft non abs sold not my picture but its exactly what it looks like Last edited by SoCalDrifter; 05-18-2013 at 12:02 PM..

05-02-2013, 03:12 PM	#4
tapdeznutz Nissanaholic! Join Date: May 2011 Location: Long Beach Age: 45 Posts: 1,801 Trader Rating: (50) Feedback Score: 50 reviews	if you still got this in acouple weeks i may pick it up. gl for now. __________________ FS: DSS 1pc Steel Non ABS, 6bolt axles WTB: Boost Gauge, Hatch Roof Wing

05-02-2013, 01:57 PM	#2
SoCalDrifter Nissanaholic! Join Date: Jan 2010 Location: Thousand Oaks-818 Posts: 1,990 Trader Rating: (10) Feedback Score: 10 reviews	bump new price 350

05-02-2013, 02:54 PM	#3
aga Zilvia Junkie Join Date: Mar 2013 Location: Athens, Greece Age: 46 Posts: 580 Trader Rating: (0) Feedback Score: 0 reviews	what's the difference with abs models? mine HAD abs, i've removed it...

05-02-2013, 08:29 PM	#5
90pearlz Zilvia Junkie Join Date: Apr 2007 Location: Sacramento,CA Age: 39 Posts: 440 Trader Rating: (20) Feedback Score: 20 reviews	^^Search for more info but here is the jist. ABS diffs as well as 300zx, skyrine, etc..diffs are just a bit longer. The snout where the drivehsaft bolts to is like an inch or less longer. But to be honest with you all 1 piece driveshaft lengths are so close in length its hardly noticeable. I have an s13 coupe with a 1 piece that I got from a member who had it on a s14!! It fits perfect, no lie. I've even heard from a certain vendor that all the shafts are so similar that you can really get away with any of em. However the smart thing to do would be to purchase the correct shaft for your model. The only problem I could see is some damage to the tranny rear main but even that seems unlikely, and is an easy fix should it occur. If for seem reason the shaft purchased happen to be a little short then maybe just maybe you could damage the splines on either the shaft or the tranny output. Mine works flawlessly but maybe I just got lucky. Good luck OP

05-04-2013, 12:13 PM	#7
HTSDesign Leaky Injector Join Date: Nov 2012 Location: NJ Posts: 51 Trader Rating: (0) Feedback Score: 0 reviews	this is a great deal

05-05-2013, 01:30 AM	#8
89SwapXE Zilvia Junkie Join Date: Sep 2009 Location: inland empire Posts: 487 Trader Rating: (5) Feedback Score: 5 reviews	where you located in ca?? Posted from Zilvia.net App for Android

05-07-2013, 12:16 PM	#10
SoCalDrifter Nissanaholic! Join Date: Jan 2010 Location: Thousand Oaks-818 Posts: 1,990 Trader Rating: (10) Feedback Score: 10 reviews	bummmp still have this need the cash lets get it out of here

05-07-2013, 01:46 PM	#11
Stayabovethelaw Nissanaholic! Join Date: Jan 2012 Location: Brooklyn Age: 37 Posts: 1,877 Trader Rating: (59) Rides Gallery: Stayabovethelaw Feedback Score: 59 reviews	u can use abs non abs ect..... i had an abs one piece i used it with my welded diff... j30 diff and zx diff all were fine

05-09-2013, 05:37 PM	#13
SoCalDrifter Nissanaholic! Join Date: Jan 2010 Location: Thousand Oaks-818 Posts: 1,990 Trader Rating: (10) Feedback Score: 10 reviews	anymore offers???

05-13-2013, 02:48 PM	#14
SoCalDrifter Nissanaholic! Join Date: Jan 2010 Location: Thousand Oaks-818 Posts: 1,990 Trader Rating: (10) Feedback Score: 10 reviews	last bump someone buy this before i have to make a new thread

05-13-2013, 08:19 PM	#15
petechason2 Join Date: May 2013 Location: London Age: 38 Posts: 8 Trader Rating: (0) Feedback Score: 0 reviews	Their set up isn't yours.